_maverick_ Posted October 1, 2007 Report Share Posted October 1, 2007 (edited) All of the scopes are 3x. <{POST_SNAPBACK}> Nay, some of the older ones were 1.5x. @ massoh2, I happen to have one that doesn't see use and may be willing to sell, send me a pm if interested. Edited October 1, 2007 by _maverick_ Link to post Share on other sites
6ft4 Posted October 1, 2007 Report Share Posted October 1, 2007 6ft4....How do you like that z-point/s-point reddot? <{POST_SNAPBACK}> I really like my Zeiss Z-point. Looks great on the G36KE and MP7. The adjustment for brightness is pain in the axx. becoz one buttom for brightness, on/off. All in One. Even I had read the manual many times, still can't able to adjust the brightness sucessfully. It is not user-friendly. 6ft4....Where did you get the actual KSK rail? Sl-8.de? Did you have to do any modifications to install it? <{POST_SNAPBACK}> Seconded,on that 6ft 4. KM <{POST_SNAPBACK}> I have ordered the KSK top rail directly from H&K Germany. Link to post Share on other sites
Kingmob3 Posted October 1, 2007 Report Share Posted October 1, 2007 (edited) damn, so I assume you gave them a crate of others high value organs for it? KM *ETA* If you have not seen this and are still looking for MP7 sights: http://www.arniesairsoft.co.uk/forums/inde...howtopic=124713 Edited October 1, 2007 by Kingmob3 Link to post Share on other sites
BP-anon Posted October 1, 2007 Report Share Posted October 1, 2007 ksc g36c? How is it? Link to post Share on other sites
MrBlanks Posted October 2, 2007 Report Share Posted October 2, 2007 I like how the handguard looks more natural than the CA large ones. Quick question: Is there a place where they sell the G36k barrel and flash hider alone but with threading. I try so hard to get my CA flash hider off and nothing. Many thanks. Link to post Share on other sites
6ft4 Posted October 2, 2007 Report Share Posted October 2, 2007 ksc g36c? How is it? <{POST_SNAPBACK}> are u meaning KWC G36C? Link to post Share on other sites
Hick Posted October 2, 2007 Report Share Posted October 2, 2007 (edited) I like how the handguard looks more natural than the CA large ones. Quick question: Is there a place where they sell the G36k barrel and flash hider alone but with threading. I try so hard to get my CA flash hider off and nothing. Many thanks. <{POST_SNAPBACK}> You can get them here: http://warthersoriginalsonline.com/g36parts.htm I've bought from there website and ebay account, and they sent my ebay order no problem, but forgot my order I placed with their site, however they shipped it right out after I sent an e-mail asking where my order was. are u meaning KWC G36C? <{POST_SNAPBACK}> KWA me thinks (is a wee bit confusing with the name similarities of the 3 companies). Edited October 2, 2007 by Hick Link to post Share on other sites
evilliboba Posted October 2, 2007 Report Share Posted October 2, 2007 are u meaning KWC G36C? <{POST_SNAPBACK}> No he means KSC. Link to post Share on other sites
0nslaught Posted October 2, 2007 Report Share Posted October 2, 2007 No he means KSC. <{POST_SNAPBACK}> KSC made a g36? i think it is KWA Link to post Share on other sites
BP-anon Posted October 3, 2007 Report Share Posted October 3, 2007 (edited) no, I mean KSC. KWA g36c: KWA trades, eg1000, m120? (about 390fps) KSC g36c: HK trades, eg700, m110? m100? (about 355fps) The OEM is KWA, the KSC is for asian markets. <edit> hehehehe... i'm an idiot. Sorry emptied, I already asked you about the gun, didn't I Edited October 3, 2007 by benplaut Link to post Share on other sites
0nslaught Posted October 3, 2007 Report Share Posted October 3, 2007 KWA g36c: KWA trades, eg1000, m120? (about 390fps) <{POST_SNAPBACK}> wait huh? look at those pics in the redwolf link, hk trades. anyone got a link to the KSC G36? Link to post Share on other sites
BP-anon Posted October 3, 2007 Report Share Posted October 3, 2007 (edited) notice is also says 355fps. That's the KSC. <edit> Well, let's just say that there's a US version sold only by KWA, and an asia version sold by KSC and possibly other vendors. Edited October 3, 2007 by benplaut Link to post Share on other sites
BP-anon Posted October 3, 2007 Report Share Posted October 3, 2007 (edited) (Sorry, not letting me edit) Request for people with star g36k handgaurds: What can you stick in the bugger without a dremmel? 20mm? less? You can get the foregrip at ehobby for ~$30, but then an outer barrel is a necessity... only thing I've seen so far is a ps90 barrel, but it's a bit long. If you could also measure the standard g36k barrel, from end to and and from end to flashhider, that would be great. For those who have no clue what i'm talking about, I'm trying to replace the outer barrel with a silencer... for the g36c users who still have no clue... Well, you don't have an outer barrel Edited October 3, 2007 by benplaut Link to post Share on other sites
6ft4 Posted October 3, 2007 Report Share Posted October 3, 2007 Twin G36C Top one with Replica A.A.C silencer Bottom one with Replica Gemtech Halo silencer Link to post Share on other sites
Wolfen Posted October 3, 2007 Report Share Posted October 3, 2007 Some's of my Team Link to post Share on other sites
cyclone5uk Posted October 3, 2007 Report Share Posted October 3, 2007 <{POST_SNAPBACK}> Beautiful. Just add a solid/sliding stock and that’s the look I’m aiming for my G36C. Although I think I prefer the aesthetic of silencers that protrude from within the handgaurd, rather than start outside of it (as in the above pics). Link to post Share on other sites
QuiN Posted October 3, 2007 Report Share Posted October 3, 2007 (edited) Wolfen, these markings are *censored*. Edited October 3, 2007 by QuiN Link to post Share on other sites
Turver Posted October 3, 2007 Report Share Posted October 3, 2007 Wolfen, they look awesome, whats the make of the launcher, on the far right rifle? Link to post Share on other sites
6ft4 Posted October 6, 2007 Report Share Posted October 6, 2007 My MG36 with Surefire M570B Handguard Real Carrying Handle with Dual Optics Real G36 Folding stock Link to post Share on other sites
Rifleman6660 Posted October 6, 2007 Report Share Posted October 6, 2007 How do you remove the sights from a G36C, I know there is a pin but how do I remove it. Link to post Share on other sites
Abelius Posted October 6, 2007 Report Share Posted October 6, 2007 (edited) By sawing the whole section of the carry handle off. Seriously: Get for instance another thin pipe of metal, put it against the pin that is inside and hammer it out. It won't break even if you are a bit harsh to it. Edited October 6, 2007 by Abelius Link to post Share on other sites
Rifleman6660 Posted October 6, 2007 Report Share Posted October 6, 2007 Well I tried hitting it with a hammer with a screwdriver thing and it didn't budge. Link to post Share on other sites
Abelius Posted October 7, 2007 Report Share Posted October 7, 2007 Get a bigger hammer. There's no quick detachment electrical button attached to the folding stock. It might be really stiff on the first time. Link to post Share on other sites
Domz Posted October 7, 2007 Report Share Posted October 7, 2007 (edited) (Sorry, not letting me edit) Request for people with star g36k handgaurds: What can you stick in the bugger without a dremmel? 20mm? less? You can get the foregrip at ehobby for ~$30, but then an outer barrel is a necessity... only thing I've seen so far is a ps90 barrel, but it's a bit long. If you could also measure the standard g36k barrel, from end to and and from end to flashhider, that would be great. For those who have no clue what i'm talking about, I'm trying to replace the outer barrel with a silencer... for the g36c users who still have no clue... Well, you don't have an outer barrel <{POST_SNAPBACK}> You cant really fit anything more than 2mm wider than the outer barrel through it without making it wider if its similar to the CA. Standard barrel is ~363 to the start of the flashider, then flashider is another 5-6cm Edited October 7, 2007 by Domz Link to post Share on other sites
Recommended Posts