The Vainguard Posted August 2, 2010 Report Share Posted August 2, 2010 (edited) Got my EOTech and other parts update: EOTech 553 ACLM Ambi Charging handle RATech ambi selector Still waiting for rail... Edited August 2, 2010 by The Vainguard Link to post Share on other sites
alston251 Posted August 2, 2010 Report Share Posted August 2, 2010 Since my question is Knight's related i thought I'd ask it here. Is there actually any airsoft KAC TTB that will fit any airsoft M4 QDSS supressor? Link to post Share on other sites
grzechotnik Posted August 2, 2010 Report Share Posted August 2, 2010 Of course... Any one. Link to post Share on other sites
The Vainguard Posted August 2, 2010 Report Share Posted August 2, 2010 No, the G&P one doesn't have the notch. Link to post Share on other sites
BrooklynBorn Posted August 3, 2010 Report Share Posted August 3, 2010 Well G&P is just one brand. Now there's Element (who also make a QDSS NT4 replica) Iron Airsoft, WE etc I'm sure someone could manually put in the cuts, I just don't have the equipment (or knowledge for that matter) Link to post Share on other sites
alston251 Posted August 3, 2010 Report Share Posted August 3, 2010 (edited) I know the Iron airsoft and Element ones has the cut but i think i read somewhere that the cut isn't deep enough to fit a QDSS suppressor. And different company's suppressors have different specs on the locking system, different company's TTBs may also have different specs. Even some of those notched bird cage flash hiders that come with the QDSS suppressors fit really loosely. I was told that the Dboys QDSS fits the WE PDW TTB, but i haven't tried it. But I'm looking for other solutions since the Dboys QDSS is quite expensive and the WE TTB would have to be ordered separately as a part and doesn't come in chrome. And knowing WE it would probably become rusty in no time. Does anyone know if any QDSS suppressor that fits the chrome Iron Airsoft TTB? Thanks guys. Edited August 3, 2010 by alston251 Link to post Share on other sites
Vercingetorix Posted August 3, 2010 Report Share Posted August 3, 2010 Funny story... I got the 2009 ver. (latest one atm) VFC QDSS, as well as a VFC TTB from a combat master. They don't work.... The TTB is to short/the VFC's internal cavity is too long to lock in place with the notch, so it just spins when you attach it. Thats airsoft I suppose. Link to post Share on other sites
uscmCorps Posted August 3, 2010 Report Share Posted August 3, 2010 I had an interesting experience this past weekend using the EBB TTB. I removed the metal core from the TTB so it was just the metal shell screwed onto the mounting collar.Mid way through the day, I inspected the mouth of the TTB to see that I had (at least one) outgoing strike on the edge if the muzzle. It's the same thing I was always concerned about when using the VFC TTB, which was that the muzzle opening is so tight, that unless your BB exits the inner barrel perfectly straight, you're going to clip the TTB on the way out. What I do like about the G&P one is that while it isn't quite as accurate, the exit opening is significantly wider. I think the only remedy for this would be to bore out the end of the EBB TTB to be a bit wider. Link to post Share on other sites
reaper16 Posted August 9, 2010 Report Share Posted August 9, 2010 Well guys, Dytac just released the KAC micro point mount, I would get the socom but it isnt a copy of a RS, I'm gonna go drop the 80 on it, I'll post a review later. Link to post Share on other sites
alston251 Posted August 9, 2010 Report Share Posted August 9, 2010 Who currently carries them? Link to post Share on other sites
BrooklynBorn Posted August 9, 2010 Report Share Posted August 9, 2010 Ehobby, AirsoftGlobal. Link to post Share on other sites
reaper16 Posted August 9, 2010 Report Share Posted August 9, 2010 nvm..I just discovered how ###### dytac optics are, looks as though I will be going another route. Link to post Share on other sites
BrooklynBorn Posted August 10, 2010 Report Share Posted August 10, 2010 I don't think DYTac makes them. I think Dytac only makes mounts. You can buy an ACM T-1 and buy the DyTac mount from airsoftglobal. I was under the impression that G&P made their own T-1, but I have been told that they also use ACM ones under their name. So you're really getting the same optic anywhere. Link to post Share on other sites
Reincarnation... Posted August 10, 2010 Report Share Posted August 10, 2010 If I recall correctly, same manufacturing factory however different quality control dependent on the company that purchase the red dot replicas. Lets say replica dot graded between 1-10. Maybe G&P take the optics only in the 8-10 grade. Dytac only the 6-7 grade. And ACM with 3-7. Or whatever. Instead of the factory just strapping low quality replicas, they are able to recuperate funds by selling lower grade optics to individuals willing to purchase them. I do believe it is something like that with the Aimpoint Micro replicas. Link to post Share on other sites
uscmCorps Posted August 11, 2010 Report Share Posted August 11, 2010 I've been present when DYTac buys his ACM supplies. He buys them and checks them to make sure they turn on and off and that's it. From what I understand that's the same as what G&P does. G&P just got really lucky in that when they bought there's, they bought an entire production run and they were more or less all decent. But there's no guarantee that the G&Ps will remain that way. DYTac buys in his in smaller batches (a few hundred each time). Everyone selling those ACM T-1 replicas are buying them from the same manufacturer, they just vary a lot from batch to batch. Link to post Share on other sites
BrooklynBorn Posted August 11, 2010 Report Share Posted August 11, 2010 Thanks for the clarification. If I do get a T-1, you can bet it's gonna be a DYtac, just for that KAC mount. Link to post Share on other sites
uscmCorps Posted August 12, 2010 Report Share Posted August 12, 2010 You can buy the KAC mount on its own too though. Not sure if it's worthwhile trying to get a G&P T-1 and a DYTac KAC mount. All the DYTac T-1s I've seen were great. The reticule, though not as bright as my real T-1 at it's highest setting, is certainly about the same sharpness. Link to post Share on other sites
BrooklynBorn Posted August 12, 2010 Report Share Posted August 12, 2010 True, but the only place selling the mount alone is AirsoftGlobal, @ $80, where the T-1+Mount is available at eHobby for the same price. I'll be getting a real H-1 for my real AR anyhow. Just a matter of waiting for me. Link to post Share on other sites
brimm2000 Posted August 12, 2010 Report Share Posted August 12, 2010 Almost completely done, all i have to add is a element surefire M600c replica and a DCC offset mount for it. Forgive the 416 receiver its all i have that will fit the gun till my replacement SR lower comes from VFC hopefully I'll be able to post pics of it with a lower with knight's trades. added Element KAC style panels, Iron TTB, Iron hand stop and Pro&T peq15. Link to post Share on other sites
alston251 Posted August 12, 2010 Report Share Posted August 12, 2010 Very nice. I like your set up. Link to post Share on other sites
aznriptide859 Posted August 12, 2010 Report Share Posted August 12, 2010 If it's a VFC receiver, wouldn't the rails not line up with the URX rail? Link to post Share on other sites
grzechotnik Posted August 12, 2010 Report Share Posted August 12, 2010 Why the hell not? Link to post Share on other sites
BrooklynBorn Posted August 12, 2010 Report Share Posted August 12, 2010 But he's using a VFC upper..... Link to post Share on other sites
aznriptide859 Posted August 12, 2010 Report Share Posted August 12, 2010 (edited) HK416 rails/receiver rails are supposed to be about 2-3mm higher than normal M4 receivers, which means that unless you use a HK416 receiver with the HK416 rail, they won't meet up. At least that's what I thought. Maybe VFC got lazy and didn't want to make a completely new upper? XD Edited August 12, 2010 by aznriptide859 Link to post Share on other sites
BrooklynBorn Posted August 12, 2010 Report Share Posted August 12, 2010 Wait, what? I know that, but he's using an SR15E3 upper, with a 416 lower, which in airsoft, is just an AR lower. Link to post Share on other sites
Recommended Posts