wolfgeorge Posted July 7, 2017 Report Share Posted July 7, 2017 Beautiful gun. Wolf Quote Link to post Share on other sites
CALLAHAN_88 Posted July 12, 2017 Report Share Posted July 12, 2017 Ready for this weekend! Quote Link to post Share on other sites
Batmause Posted July 25, 2017 Report Share Posted July 25, 2017 Based on WE AK74UN. Quote Link to post Share on other sites
vorpalbunnie Posted July 25, 2017 Report Share Posted July 25, 2017 LOL ;P Based on WE AK74UN. Quote Link to post Share on other sites
AG1212 Posted August 2, 2017 Report Share Posted August 2, 2017 Just got to move the dustcover sight? Quote Link to post Share on other sites
Tarr Posted September 6, 2017 Report Share Posted September 6, 2017 (edited) More or less done externally, waiting for another outer barrel (short) and a flashlight to arrive so I can have a cqb setup but that should be it. Used a URX keymod rail section for the top and side rail. Not perfect as it was all hand made but I'm happy with how it turned out Edited September 6, 2017 by Tarr Quote Link to post Share on other sites
Batmause Posted September 20, 2017 Report Share Posted September 20, 2017 Quote Link to post Share on other sites
Mike Obrien Posted September 26, 2017 Report Share Posted September 26, 2017 More or less done externally, waiting for another outer barrel (short) and a flashlight to arrive so I can have a cqb setup but that should be it. Used a URX keymod rail section for the top and side rail. Not perfect as it was all hand made but I'm happy with how it turned out How did you make the frame the rail sits on? Quote Link to post Share on other sites
Tarr Posted September 26, 2017 Report Share Posted September 26, 2017 How did you make the frame the rail sits on? I took a 2 mm thick aluminium plate, cut out the shapes and epoxied them together. Here is a pic of the cutouts laid out in the order they were glued together in: And one of a test fit on the reciever: Quote Link to post Share on other sites
Mike Obrien Posted October 6, 2017 Report Share Posted October 6, 2017 I took a 2 mm thick aluminium plate, cut out the shapes and epoxied them together. Here is a pic of the cutouts laid out in the order they were glued together in: And one of a test fit on the reciever: Awesome I am doing something similar and looking for ideas on what to do, I took a JG AUG A2 and chopped the rail off with the intent on making an A3. what kind of epoxy did you use? Quote Link to post Share on other sites
Tarr Posted October 6, 2017 Report Share Posted October 6, 2017 Awesome I am doing something similar and looking for ideas on what to do, I took a JG AUG A2 and chopped the rail off with the intent on making an A3. what kind of epoxy did you use? I used JB weld. To be honest i would have done it a bit differently now - thicker material and less parts mainly. Maybe for the next one. Quote Link to post Share on other sites
Mike Obrien Posted October 10, 2017 Report Share Posted October 10, 2017 I used JB weld. To be honest i would have done it a bit differently now - thicker material and less parts mainly. Maybe for the next one. Quote Link to post Share on other sites
Mike Obrien Posted October 10, 2017 Report Share Posted October 10, 2017 oddly the text didn’t go with the quote. Is the 2mm to flimsy? Quote Link to post Share on other sites
Tarr Posted October 10, 2017 Report Share Posted October 10, 2017 It's solid when it's all glued and bolted together but a bit of a pain to keep from bending when working with individual parts. Also if like me you only have hand tools available its a bit of a pain in the rear to get everything nice and square with this many parts. If I were to do this again i would have taken two 8mm blocks and just fiddle around with a file untill i can get them to sit together on the prongs left on the receiver. If you have someone with even a hobby cnc machine this would probably be childs play to make.If i can help you out with any more info on this feel free to PM me, wouldnt want to spam up the thread too much with this Quote Link to post Share on other sites
renegadecow Posted October 28, 2017 Report Share Posted October 28, 2017 1 Quote Link to post Share on other sites
pinoyboy Posted November 22, 2017 Report Share Posted November 22, 2017 I wanted to use this for CQB and still have the option to use it outdoors too by changing to a longer outer barrel. Quote Link to post Share on other sites
druid799 Posted November 23, 2017 Report Share Posted November 23, 2017 I wanted to use this for CQB and still have the option to use it outdoors too by changing to a longer outer barrel.Freely admit mate I saw this and almost did a small vomit in too the back of my mouth it’s such an abortion !But as Sheryl Crow said “if it makes you happy , it can’t be that bad” me personally ? Yes it is that bad ! But again as long as you like it who gives a s**t ! Rock on my friend ! Quote Link to post Share on other sites
chrispyfur Posted November 23, 2017 Report Share Posted November 23, 2017 I love that. Awesome rifle! Quote Link to post Share on other sites
Mike Obrien Posted December 2, 2017 Report Share Posted December 2, 2017 (edited) For all intensive purposes... It is done. Externals are all set now, minus what optics and such I will use. Most likely an EOTech replica or my elcan replica, and the small side rail will get a flashlight. I'll post pictures up once I have it all together. Edit: One external piece is yet to be correct.... The charging handle. Can't find a true A3 charging handle. Oh and I still need to attach the front sling point. As for internals (which weren't in the gun at the time of the picture being taken).... 13:1 ZCI gear set Core double O-ringed nozzle M110~20 spring R-hop'd 407mm 6.02 Barrel The internals were out so I could swap the cylinder out of the gearbox, this was originally my secondary gearbox for my other AUG when I didn't want to use it as a DMR, so I need to swap from a type 0 to a type 1 cylinder. Edited December 2, 2017 by Mike Obrien Quote Link to post Share on other sites
CALLAHAN_88 Posted May 1, 2018 Report Share Posted May 1, 2018 Quote Link to post Share on other sites
PureSilver Posted March 16, 2021 Report Share Posted March 16, 2021 GHK AUG A2 (OD) in small, medium, and large. Steel gas block, DevilHunter conversion, Black Widow hop-up unit with Maple Leaf inner barrel and rubber. Commando configuration with cut-down Hephaestus steel outer barrel and Best Gun steel flash hider. StG-77 configuration with Best Gun steel outer barrel extension and flash-hider. HBAR configuration with Hexagon Production steel HBAR outer barrel, bipod and flash hider. 5 Quote Link to post Share on other sites
PureSilver Posted March 16, 2021 Report Share Posted March 16, 2021 Oh, and I guess the other bullpup counts too! Silverback SRS-A1 G-Spec with Mancraft SDiK. 5 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.