stewpidbear Posted September 20, 2013 Report Share Posted September 20, 2013 Either get an adapter or desolder the TM batt connector and replace it with a length of wires and a deans connector. If you can solder an easy 10 minute job. Link to post Share on other sites
Pdubyuh Posted September 24, 2013 Report Share Posted September 24, 2013 http://www.airsoftworld.net/baton-gunsmith-sopmod-to-lipo-adaptor.html and i thought CRW airsoft had some 416's in stock, you can "add to cart" but if that means they're in stock or that they would just take your cash and wait for stock i dont know, i'm tempted to get another adaptor myself just in case. If my broke, got lost i'd be crying lol! Link to post Share on other sites
Fellowz Posted September 24, 2013 Author Report Share Posted September 24, 2013 i wonder when the DEVGRU version will be released. Link to post Share on other sites
hiawatha Posted September 24, 2013 Report Share Posted September 24, 2013 The tm 416 is an awesome gun no questions there, BUT if you play alot of woodland and other outdoor fields i would highly recommend you to try one out before purchase since the rather low fps. Most will mention the range and its true its awesome, but it really doesnt make up for the low fps if playing outdoor. I had 3 TM recoils by now and they all kicked *albatross* with awesome features. The VFC (wich i also had) has a better body, stock etc no doubt but the TM aint far behind. Link to post Share on other sites
Baddbaz Posted September 24, 2013 Report Share Posted September 24, 2013 Or the expensive hopped up and dressed up black ops Airsoft 416 is another option . Lonex gearbox , hop , overbore piston, Lonex ( I think motor , high speed gearset , prom my tightbore , vfc externals with a few mods to handgrip to slim it down . Have fired one and the trigger response is very very impressive as is the range . But the price they are asking is a bit exorbitant . But you do get a limited edition hand finished / tuned gun with a hard case . Link to post Share on other sites
JCheeseright Posted September 24, 2013 Report Share Posted September 24, 2013 The tm 416 is an awesome gun no questions there, BUT if you play alot of woodland and other outdoor fields i would highly recommend you to try one out before purchase since the rather low fps. Most will mention the range and its true its awesome, but it really doesnt make up for the low fps if playing outdoor. I had 3 TM recoils by now and they all kicked *albatross* with awesome features. The VFC (wich i also had) has a better body, stock etc no doubt but the TM aint far behind. That is a fair point, I run mine completely stock (barring a tightbore barrel) and the low FPS is a factor in woodland games, flinging 0.25s at 250FPS it takes a while for them to reach their maximum range and matrix style bullet dodging is entirely possible! That said, it's still the best AEG I've ever owned and I've never felt outgunned as a result of the lower than optimal FPS. Link to post Share on other sites
druid799 Posted September 24, 2013 Report Share Posted September 24, 2013 Yes the BBs do travel slower through the air than an asthmatic snail with a limp BUT I find I get kills at boarder line sniper ranges so for me that cancels out the low power/slow speed the gun puts out . Link to post Share on other sites
JCheeseright Posted September 24, 2013 Report Share Posted September 24, 2013 like I said, never felt outgunned! Just wish it would shoot 350 and have the same (or better!) range, but I don't want to take it to bits and f*ck it up! Link to post Share on other sites
stewpidbear Posted September 25, 2013 Report Share Posted September 25, 2013 Very true, if it ain't broke, don't fix it! Link to post Share on other sites
Pkekyo-Nor Posted September 25, 2013 Report Share Posted September 25, 2013 i wonder when the DEVGRU version will be released. Mate, don't get the DEVGRU version - for your purposes you'll be facing a nightmare of sourcing the correct stock, and pistol grip that's on the regular version. I'd rather hold out until the fanboys start buying the "DEVGRU" (read: sheeple) version and start selling their regular ones at a loss Link to post Share on other sites
druid799 Posted September 25, 2013 Report Share Posted September 25, 2013 I'd rather hold out until the fanboys start buying the "DEVGRU" (read: sheeple) version and start selling their regular ones at a loss Ha Ha , so true , so true ! Link to post Share on other sites
Fellowz Posted September 25, 2013 Author Report Share Posted September 25, 2013 well it's settled then i must play the waiting game, altho it will be difficult to set money aside when there is so much else i need to get, i think christmas will be an expensive one for the misses Link to post Share on other sites
hiawatha Posted September 25, 2013 Report Share Posted September 25, 2013 Yes the BBs do travel slower through the air than an asthmatic snail with a limp BUT I find I get kills at boarder line sniper ranges so for me that cancels out the low power/slow speed the gun puts out . Exactly. I still think u should try them out one time first. I actually felt outgunned and so did another guy i know who also had them. The loud noise and the slow travel actually lets your component take cover if in a stealthy woodland scenario. Not bashing on them, just a heads up! They are amazing and i miss mine Link to post Share on other sites
PureSilver Posted September 25, 2013 Report Share Posted September 25, 2013 Or the expensive hopped up and dressed up black ops Airsoft 416 is another option . [...] Have fired one and the trigger response is very very impressive as is the range . But the price they are asking is a bit exorbitant . I'd forgotten the BO. Like you say, very impressive performance at an absolutely obscene price. I've heard about reliability woes with the BOs as well, though I can't remember if that was the HK416s or the Kalashnikovs. Link to post Share on other sites
hiawatha Posted September 25, 2013 Report Share Posted September 25, 2013 Link to one of those BO guns? Please ? Link to post Share on other sites
Manxmadman Posted September 25, 2013 Report Share Posted September 25, 2013 http://www.bomanufacture.com/fr/store/marque-1-bo/ss-categorie-1-aeg Can't say I'd buy one over a TM. More expensive and none of the shakey shakey features. Link to post Share on other sites
PureSilver Posted September 25, 2013 Report Share Posted September 25, 2013 MUCH more expensive. They listed at £640 for the customised version at Pro Airsoft Supplies. Link to post Share on other sites
Kratisto Posted September 25, 2013 Report Share Posted September 25, 2013 Not to mention a wrong M4 lower with fake "Delta" markings. Seriously? Link to post Share on other sites
Baddbaz Posted September 25, 2013 Report Share Posted September 25, 2013 The 416 uses two types of different lowers dependant on which version it is Link to post Share on other sites
Kratisto Posted September 25, 2013 Report Share Posted September 25, 2013 Yeah, the standard HK416 and the new A5 version. Or a HK416 10.5" upper on a M4A1 lower like the first ones in service BO is trying to replicate. The BO 416 is none of those, just a generic M4 lower with a fantasy "Delta" logo. No H&K markings in the upper either. Hell, even the selector text is lasered instead of engraved like a cheap D-Boys! Link to post Share on other sites
PureSilver Posted September 25, 2013 Report Share Posted September 25, 2013 The 'Delta' logos are BO's own, if that helps; they don't have a license from Umarex, HK's IP licensors, so they obviously decided it wasn't worth the risk to engrave them properly. I'm not sure about the receiver; what would be the difference between the M4A1-lowered HK416s and the BO? Just the M4A1 markings? Or is there something more? Link to post Share on other sites
Kratisto Posted September 25, 2013 Report Share Posted September 25, 2013 Yes, mainly the Colt M4A1 markings. I think the MK18 style buffer tube sling mount is wrong too. I understand they can't have the license to both H&K and Colt (imagine dealing with Umarex and Cybergun at the same time!), but then why bother doing a half-assed product? Or just a hightly tuned Umarex/VFC 416 DX ? Link to post Share on other sites
Baddbaz Posted September 25, 2013 Report Share Posted September 25, 2013 Bo use vfc externals on their m4 / 16 guns so will be mainly the same as vfc markings , apart from custom bits . All internals are tuned / modded Lonex parts inc hop , motor , gearbox , usually high speed set ups with 40 / 60 degree hops and overbore kits . Link to post Share on other sites
hiawatha Posted September 26, 2013 Report Share Posted September 26, 2013 Fellowz: WGCshop got some in stock right now! HURRY HURRY!!! Link to post Share on other sites
Fellowz Posted September 26, 2013 Author Report Share Posted September 26, 2013 god dammit, payday isn't till Monday Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.