Azulsky Posted September 16, 2006 Report Share Posted September 16, 2006 Its only an Upper, if you want a metal g3, get the new SAR Taktik by CA Link to post Share on other sites
DarkLite Posted September 17, 2006 Report Share Posted September 17, 2006 No - CA do a metal body set with Upper and Lower, and a cocking tube set for the G3 and Mc51. Link to post Share on other sites
Azulsky Posted September 17, 2006 Report Share Posted September 17, 2006 Yeah i know CA do the whole set, have one for my hk51, and g3 It seems from G&G site that it is only a upper b2b.guay2.com Link to post Share on other sites
DarkLite Posted September 17, 2006 Report Share Posted September 17, 2006 Oh - sorry I misunderstood. Yes, G&G only sell uppers seperately. Here's my latest project with my G3SAS - I FINALLY managed to finish modifying the chamber block so I can put Mc51 and G3 cocking tubes on. I hope to end up being able to switch between the three quite quickly. Edit: Ridiculously large image removed. Resize it please. Pablo That grip is acually my Mc51 grip - I was testing whether the SG1 grip would fit over the modded chamber block - it seems it will. Now I just need: - G3 SG1 Handgrip - G3 Bipod - G3 Sling hook - G3 Grip pin - Inner Barrel - Matte black spray paint - Mc51 Outer barrel - And the inner barrel to match - CA ELCAN + CA KillFlash - G3 highmount Then it'll be sex on a stick. Link to post Share on other sites
Rob15 Posted September 17, 2006 Report Share Posted September 17, 2006 Could you post a bigger pic? having a lot of trouble seeing that one Link to post Share on other sites
evilhippy Posted September 17, 2006 Report Share Posted September 17, 2006 Holy shiznit DL, that is a bit large Is that my old large foregrip on there? Link to post Share on other sites
r0b0tic Posted September 17, 2006 Report Share Posted September 17, 2006 Nice feet. Link to post Share on other sites
DarkLite Posted September 17, 2006 Report Share Posted September 17, 2006 Yes, EH, that's your old Large foregrip. I'll be using it for the Mc51 conversion that I might get later. Nice feet. <{POST_SNAPBACK}> Bit worried now. Link to post Share on other sites
evilhippy Posted September 17, 2006 Report Share Posted September 17, 2006 `A good deed goes aound the world` - in this case it only goes about 6,000 miles, but hey, its a good start Link to post Share on other sites
Moriquende Posted September 18, 2006 Report Share Posted September 18, 2006 How hard is it to make a HK53? Do you need to make something? Link to post Share on other sites
Azulsky Posted September 19, 2006 Report Share Posted September 19, 2006 (edited) You need Classic Army CA33E, the mc51 front end including the flashider bit. Sadly you would have to get a rs stock because no sliding stocks are out there Not exactly a G3 question either. Edited September 19, 2006 by Azulsky Link to post Share on other sites
DarkLite Posted September 19, 2006 Report Share Posted September 19, 2006 I have now a SG1 Grip - updated pics to come soon. PS: It's fracking HUGE. Link to post Share on other sites
n00bTard Posted September 19, 2006 Report Share Posted September 19, 2006 How different is the CA33's stock from an MP5's solid stock, other than length? Could an MP5's sliding stock be modified to make an HK53? or is just too different? Just curious - I think it could make a fun project. Link to post Share on other sites
DarkLite Posted September 21, 2006 Report Share Posted September 21, 2006 (edited) Just needs a tightbore and a bipod - getting them tommorow. Huge images removed Edited September 22, 2006 by Pablo Link to post Share on other sites
Rob15 Posted September 21, 2006 Report Share Posted September 21, 2006 (edited) *fruitcage* hell, resize those pics! Or buy us all 1mile wide monitors Edited September 21, 2006 by Rob15 Link to post Share on other sites
DarkLite Posted September 21, 2006 Report Share Posted September 21, 2006 (edited) I can't help it that you all have tiny equipment! *cough* Edited and 800x600 pics are up. Edited September 21, 2006 by DarkLite Link to post Share on other sites
Dead2k1 Posted September 21, 2006 Report Share Posted September 21, 2006 why are you converting a G3 SAS in to an SG1 ANYWAY? Link to post Share on other sites
DarkLite Posted September 21, 2006 Report Share Posted September 21, 2006 why are you converting a G3 SAS in to an SG1 ANYWAY? <{POST_SNAPBACK}> Few things: 1) It's a G3SG1C. 2) I got $400 worth of spare G3 parts for $9. 3) I wanted a long range AEG as I only have CQB ones. 4) Rushing EVERY time you play gets painful very quickly when I'm 6 foot 4. 5) I don't have money for a new AEG. 6) I had a HK51 OB lying around. 7) I can switch from G3SAS to G3SG1C in less than 5 minutes. 8) 534mm tightbore. Link to post Share on other sites
DarkLite Posted September 22, 2006 Report Share Posted September 22, 2006 She now has a 535mm tighbore in her - shoots hard, accurate and fast. All I need to do now is get a scope. She does wobble a bit - the cocking tube is a bog standard TM g3 one and is flexy. The joint is solid as concrete but the actual tube bends...*albartroth*. Huge images removed ELEMENT spring in it now - shoots well over forum limits. Huge images removed Some of the print on the can's bottom came off on the bb - I thought it most amusing. Link to post Share on other sites
doc_newstead Posted September 22, 2006 Report Share Posted September 22, 2006 2816x2112. Are you taking the *fruitcage* ######? Mods informed. Link to post Share on other sites
Pablo Posted September 22, 2006 Report Share Posted September 22, 2006 DarkLite, please post smaller images, there is no need to use a load of images that size (especially that first one!). I don't mind the odd one or two, but not loads of 'em. Link to post Share on other sites
Rob15 Posted September 22, 2006 Report Share Posted September 22, 2006 Darklite 1- Create photobucket account 2- upload photos 3- click edit 4- select 'message board' size 5- click resize 6- ????? 7- Profit! Link to post Share on other sites
DarkLite Posted September 22, 2006 Report Share Posted September 22, 2006 I did resize them to 800x600. Smaller? Link to post Share on other sites
Gundrosen Posted September 22, 2006 Report Share Posted September 22, 2006 My only working gun ATM: The tape is to block the full auto(I'm running it with above forum rules FPS and with doing so I am limited to using semi auto only) Link to post Share on other sites
Pablo Posted September 22, 2006 Report Share Posted September 22, 2006 I did resize them to 800x600. Smaller? <{POST_SNAPBACK}> Please. 800x600 isn't too bad for 1 or 2 together, but not for 10 or so. The ones Gundrosen has posted are a good size. Try cropping yours a bit, as the gun was surrounded by a lot of empty space on some of them. Link to post Share on other sites
Recommended Posts