clmwrx Posted July 25, 2005 Report Share Posted July 25, 2005 Finally!! Right, here my stuff I keep cased: And the rifles and shotguns and stuff goes here: The rest of the pistols are around, one in my desk drawer, one in a holster underneath the table, one duct-taped to the top mof my back at all times There are about 8 pistols not seen there, they are the ones in this picture below that are not rifles, SMGs or shotguns as they are in the 2nd picture, please excuse the absolutely terrible photoshopping out of the cases and stuff but I have little to no skill in this area: I'm gonna have a better display up soon, honest. I need 3 more rifles or so and I can get some racking stuff sorted. Bonza. <{POST_SNAPBACK}> there is one i found it in your displays thread Link to post Share on other sites
evilhippy Posted July 25, 2005 Report Share Posted July 25, 2005 I see my collection's getting airing I saw this and thought I might be able to help ya, would you like some shots of anything in particular, angles, parts etc? I tend to get big pics (I can't bring myself to make them any smaller ) so one of every angle and part would give the boards a seizure Link to post Share on other sites
Marshmallow Monster Posted July 25, 2005 Report Share Posted July 25, 2005 well, a straight on pic would be great (one on a lighter background so I can see it) maybe an angle from the front. Thanks Link to post Share on other sites
doc_newstead Posted July 26, 2005 Report Share Posted July 26, 2005 Jesus Christ, would you like evilhippy to rent a studio for the day as well? Perhaps get David Bailey to come round and get a few shots? How many pics of an M16 with a heatshielded-M203 do you need to see beofre you can decided if you like it or not? For reference, my amount was 'once'. Link to post Share on other sites
Marshmallow Monster Posted July 26, 2005 Report Share Posted July 26, 2005 Jesus Christ, would you like evilhippy to rent a studio for the day as well? Perhaps get David Bailey to come round and get a few shots? How many pics of an M16 with a heatshielded-M203 do you need to see beofre you can decided if you like it or not? For reference, my amount was 'once'. <{POST_SNAPBACK}> wow, now THAT my friends was an uncalled for post. Link to post Share on other sites
doc_newstead Posted July 26, 2005 Report Share Posted July 26, 2005 (edited) Oh get over it. If you really want to know how a gun looks and feels, get to a shop and look at it and feel it! The CA M15 is a solid weapon, no doubt, and having held the M15/M203, it's a goddamned wet dream. But how much can you tell from a photograph? I looked at pictures of the G&G M14 all day long, and then when I held it myself went "ewwwww...". The CA M16/M203 will look as similar to the real-steel as you want. And if you want a nice, plain picture of one, here ya go: http://www.wgcshop.com/pcart/shopper.php?i...433_srch_escort Edited July 26, 2005 by doc_newstead Link to post Share on other sites
Marshmallow Monster Posted July 26, 2005 Report Share Posted July 26, 2005 for one, who said I was looking for CA specifically? and second, it helps when the store is closer, AND even sells 203's. Link to post Share on other sites
doc_newstead Posted July 26, 2005 Report Share Posted July 26, 2005 for one, who said I was looking for CA specifically? <{POST_SNAPBACK}> I'm thinking about getting a Classic Army M15A4 Rifle basic package from Airsoft GI <{POST_SNAPBACK}> Link to post Share on other sites
Marshmallow Monster Posted July 26, 2005 Report Share Posted July 26, 2005 now tell me, where in that did you see "Show me a classic army with an M203 on it"? Link to post Share on other sites
davedawg123 Posted July 26, 2005 Report Share Posted July 26, 2005 Hey doc, do you have an m203 on your m16? If so got any pics? Make and model? Would a barrel mounted (military type) g&p or ca long fit on the m15 rifle? Link to post Share on other sites
doc_newstead Posted July 26, 2005 Report Share Posted July 26, 2005 I'm thinking about getting a Classic Army M15A4 Rifle... I want to see what it looks like with an M203 kit on it <{POST_SNAPBACK}> now tell me, where in that did you see "Show me a classic army with an M203 on it"? <{POST_SNAPBACK}> Look, I don't know what's going on here, but I'm washing my hands of this thread. Link to post Share on other sites
Marshmallow Monster Posted July 26, 2005 Report Share Posted July 26, 2005 I'm not sure whats going on with you either. Man dude, I asked a simple question, in no way did I make it hard, and you come in and start arguing with me. If you didn't like it, why didn't you just leave the thread awhile ago instead of bad mouthing me? Link to post Share on other sites
Tef Posted July 26, 2005 Report Share Posted July 26, 2005 i got a m16A3, do you think i cna get some rails kit for the lower handguard then get the RIS M203. will it be able to hold? Link to post Share on other sites
Marshmallow Monster Posted July 26, 2005 Report Share Posted July 26, 2005 well, I was told those rails just basically screw into the bottom of the handguard, like in the heatshield holes I guess. I'm not sure if I would trust that. But that idea crossed my mind too, only with one of those new Mad Bull launchers, the long one. I also thought about getting one of those RIS squares that goes around the barrel and attatches on to the front site, then attatching a few of those mini launchers to it Link to post Share on other sites
doc_newstead Posted July 26, 2005 Report Share Posted July 26, 2005 (edited) i got a m16A3, do you think i cna get some rails kit for the lower handguard then get the RIS M203. will it be able to hold? <{POST_SNAPBACK}> No way dude. It would work superficially, but I wouldn't trust it at all. The RIS kit is on solid, whereas the plastic handgaurds aren't meant to really support anything. That bolt-on rail is good for a taclight or handgrip, and that's about ti really. Edited July 26, 2005 by doc_newstead Link to post Share on other sites
doc_newstead Posted July 27, 2005 Report Share Posted July 27, 2005 (edited) I see you've just ordered a Classic Army M15A4 Marshmallow Monster, like you said you were going to in your first post. I've got the same gun, and I too am going to get the M203 for it at some point (with the heatshields). And I got a neg rep from you because apparently, I misunderstood you first post and you DIDN'T want to buy either of these things So, I don't know what happened, I really don't, and I've read and re-read your first post, but I still can't see what world-crushing mistake I made. Maybe it's the British accent eh? Edited July 27, 2005 by doc_newstead Link to post Share on other sites
evilhippy Posted July 27, 2005 Report Share Posted July 27, 2005 (edited) Okay, I forgot to track this topic and I didn't see your response marshmallowmonster, sorry man, I thought this had died a death. Doc: I don't mind taking any photos from any angle wanted mate, that's why I offered And my nickname is Dave Bailey in the office (that and Hairy Pothead - like Harry potter? Okay, not funny anymorew) anyway lol. No idea what's going on in terms of hectic misunderstandings but it's all right now I'll get a pic or four tonight, if the cinema trip doesn't distract me, and whet marshmallow's appetite mmmmmm, predator........ Edited July 27, 2005 by evilhippy Link to post Share on other sites
Hissing_Sid Posted July 27, 2005 Report Share Posted July 27, 2005 FWIW, I'd suggest you stay away from RIS mounted M203s. They just don't fit properly. I know you get them in real-life but I bet they're just temporary attachments. Me, I want to know why nobody has bolted an M203 to an airsoft M4 and left the top-half of the foregrip in place. I'd love to see one built like that. It's surely the most realistic? Link to post Share on other sites
davedawg123 Posted July 27, 2005 Report Share Posted July 27, 2005 Me, I want to know why nobody has bolted an M203 to an airsoft M4 and left the top-half of the foregrip in place. I'd love to see one built like that. It's surely the most realistic? <{POST_SNAPBACK}> Isn't that how most m203's are mounted if they are not RIS (w/ the exception of the heat shield version)? See? Link to post Share on other sites
Diemaco Posted July 27, 2005 Report Share Posted July 27, 2005 In real steel they have the upper part of the RIS with the 203 in place of the bottom part of the RIS, this setup looks cool and lasts longer than a RIS mounted Link to post Share on other sites
evilhippy Posted July 28, 2005 Report Share Posted July 28, 2005 Righty-ho chaps, here you go: 'Scuse fingers Link to post Share on other sites
evilhippy Posted July 28, 2005 Report Share Posted July 28, 2005 And again: Link to post Share on other sites
davedawg123 Posted July 28, 2005 Report Share Posted July 28, 2005 Hey, I like the pics evilhippy. Definitely seems like all the rifles w/ launchers I've seen seem to have the heatshield mounted m203. Is the gun a CA and the gernade launcher TM? Just curious how much you spent on the m203 and where you purchased it from? Thanks! Link to post Share on other sites
evilhippy Posted July 28, 2005 Report Share Posted July 28, 2005 The rifle is CA and it's a sun project M203, I spent about £250 on the lot from -=Bazza=- who occasionally haunts these forums, excellent all round and a good price too! I had SFA to do to get this, Bazza is far more capable than I technically as I would probably have had £350 worth of attractive yet dismembered guns if I'd attempted this myself Link to post Share on other sites
Marshmallow Monster Posted July 28, 2005 Report Share Posted July 28, 2005 thanks evil, those shots were perfect! Just what I needed to see, I'm sold lol. Thanks again!! Link to post Share on other sites
Recommended Posts