docs90 Posted July 18, 2012 Report Share Posted July 18, 2012 Do silencers make all that much of a difference on Tanakas? I've only done a very crude 'line it up and see if there is a difference' test but I did notice I was having to take a shot and displace a lot last time I was out. Simple answer ...yes lots Reason being the only sound that comes from the rifle will be the spring in the bolt hitting the impact plates ,, no muzzle report (or very very little ) ,my last m24 was in audable at 5 metres Link to post Share on other sites
bitchtits Posted July 18, 2012 Report Share Posted July 18, 2012 yeah very much so. I will try and get a video posted tmr if you want showing mine fire with and without the silencer. As doc said the only real noise you hear is the hammer hitting the mag. Any tanaka's I have from now on will be fitted with a silencer straight away. Link to post Share on other sites
bitchtits Posted July 19, 2012 Report Share Posted July 19, 2012 Theres a quick vid showing with and without, nothing special was done in 5 min in my garage, as I've got the kids so cant go else where. It doesn't demonstrate it fully but should give you an idea. The first one i did ,i used bbs but all you could hear was the whack of them hitting my target,as it was only 5 feet away Link to post Share on other sites
docs90 Posted July 19, 2012 Report Share Posted July 19, 2012 vid really doesnt do it justice but yes loads of sound dampening ,, nice vid though cheers BT That silencer looked expensive .......... Link to post Share on other sites
bitchtits Posted July 19, 2012 Report Share Posted July 19, 2012 I know it was shot using my wife nex5n which doesn't have the best audio.May need to invest in a new dslr as mine doesn't do video, but not sure i want or need a d800 ,plus i could buy a fair few guns for the same price. The garage also amplified all the sounds and the youtube made it go all jumpy for some reason. Was going to ask where you got it, the m40 will need one if i get it. Link to post Share on other sites
RSM Posted July 19, 2012 Report Share Posted July 19, 2012 Holy balls thats impressive....so how does one fit a silencer to a Tanaka M40A1 with a pax kit? Tried a, I think, spartan doctrine adaptor but that didn't fit in the taper on the barrel. Link to post Share on other sites
docs90 Posted July 19, 2012 Report Share Posted July 19, 2012 Was going to ask where you got it, the m40 will need one if i get it. Im sure its a vfc or king arms 3rd opps ..difficult to find now i fear Link to post Share on other sites
bitchtits Posted July 19, 2012 Report Share Posted July 19, 2012 Holy balls thats impressive....so how does one fit a silencer to a Tanaka M40A1 with a pax kit? Tried a, I think, spartan doctrine adaptor but that didn't fit in the taper on the barrel. not 100% sure best to ask doc as i got my ltr from him, but i be leave he made the silencer adapter. If you have access to a lathe it shouldn't be hard,either that for sand down a bought version. Im sure its a vfc or king arms 3rd opps ..difficult to find now i fear i couldn't remember if thats what it was but thought it was.will have a look and see where they can be had,been tempted to try running a 430mm barrel with cut down outer and one of these. Link to post Share on other sites
docs90 Posted July 19, 2012 Report Share Posted July 19, 2012 not 100% sure best to ask doc as i got my ltr from him, but i be leave he made the silencer adapter. If you have access to a lathe it shouldn't be hard,either that for sand down a bought version. I did use the king arms adaptor but i had to turn it down on a lathe and fettle it a bit to make fit , something im planning on doing again with my m24 but i want a over barrel silencer this time .. Link to post Share on other sites
docs90 Posted July 24, 2012 Report Share Posted July 24, 2012 Looking for advice if any can offer it ... does the g+g bolt knob fit the standerd bolt or will it only fit the g+g bolt .. reason i ask is if it does it saves me lathing down my original bolt to fit a badger ord bolt knob Link to post Share on other sites
gsalchi Posted July 25, 2012 Report Share Posted July 25, 2012 Hello fellow Tanaka-Owners! I have a small question regarding my m24: When using the kingarms-vsr-chamber, do you use that tiny spring between the adjustment-wheel and the "metal-piece"? I mean part no. 89: http://forum.gasgunempire.de/artikel/explosion/tanaka_m700c.jpg I am asking because my m24 didn't even come with one in the first place... Thanks in Advance! gsalchi Link to post Share on other sites
Geri Posted July 26, 2012 Report Share Posted July 26, 2012 I don't use it, and I think there aren't enough space for it. Link to post Share on other sites
wolfgeorge Posted July 26, 2012 Report Share Posted July 26, 2012 I've owned 2 preban M700 both didn't come with that spring. So no problem there! You don't need actually, the adjusting screw is touching directly on the metal piece that came with the KA kit. Wolf Link to post Share on other sites
docs90 Posted July 26, 2012 Report Share Posted July 26, 2012 I've owned 2 preban M700 both didn't come with that spring. So no problem there! You don't need actually, the adjusting screw is touching directly on the metal piece that came with the KA kit. Wolf I put a small piece or rubber in that slot to stop the above as i found the metal would cut the hop rubber after a few 100 rounds , i filed down the metal piece as in all the pax kits i have fitted there have always been sharp edges Link to post Share on other sites
gsalchi Posted July 30, 2012 Report Share Posted July 30, 2012 Thanks for the info. Link to post Share on other sites
charliethegreat Posted October 3, 2012 Report Share Posted October 3, 2012 Hi all, I'm breaking down my Tanaka m700 AICS for spares, loads of bits up for grabs. PM if you are interested G&G Heavy barrel set (fluted) includes inner barrel Tanaka bipod pin & L96 style bipod EDGI custom made 6.01mm 630mm inner barrel (never used) (VSR HOP) BGS hop chamber (just the chamber) Original M700 AICS outer barrel KJW 6.04 inner barrel (M700 HOP) 3-9 x 40 scope plus sunshade and flash hider, mounts included Tanaka AICS stock (sprayed black, original OD) upper reciever trigger mech PM if interested! Thanks Link to post Share on other sites
charliethegreat Posted October 4, 2012 Report Share Posted October 4, 2012 Ok, original tanaka barrel, m700 reciever and trigger mech, and bolt sold Link to post Share on other sites
Four Leaf Posted October 12, 2012 Report Share Posted October 12, 2012 Hey everyone, Looking for some help. I bought a M700 as not working from another forum. Basically it turns out the previous owner knackered the bolt by taking it apart and loosing parts. From what I can see, the cocking indicator is the missing part, but the bolt handle looks slightly damaged too. I was hoping that someone here could have a look over the photos and let me know : 1: Exactly what parts are missing 2: Point me in the direction of a shop I can get said parts, as I cant find a Bolt handle in stock anywhere, but can find various other parts for Tanaka bolts. Clicking on the photo will show the other pictures I took of all the parts I have. Also, here is a link to a M700 manual for parts reference : http://www.everything-airsoft.com/Airsoft-Product-Manuals/Airsoft-Gas-Rifle-Manuals/Manual%3A-Tanaka-M700-Sniper/ All help appreciated. Thanks guys. Link to post Share on other sites
renegadecow Posted October 12, 2012 Report Share Posted October 12, 2012 1: Exactly what parts are missing The cocking piece is missing as is the grub screw that keeps the striker rod from coming loose. Lucky you there's plenty of options ranging from just the piece itself to almost complete bolts. G&G steel cocking piece only http://shop.ehobbyasia.com/gandg-steel-cocking-piece-for-tanaka-m700-m24-sniper.html http://www.dentrinityshop.com/pr_details.jsp?pid=8444 power packs http://shop.ehobbyasia.com/falcon-steel-enhanced-kit-for-tanaka-kjw-m700-part-no-33-37-38.html http://shop.ehobbyasia.com/gandg-power-pack-for-tanaka-m700-m24-sniper.html and an almost complete bolt http://www.tokyo-model.com.hk/ecshop/goods.php?id=4079 Link to post Share on other sites
Four Leaf Posted October 12, 2012 Report Share Posted October 12, 2012 You Sir, are awesome, a King among men Think I'll pick up the G&G cocking piece from Ehobby, as while the Falcon kit is tempting, its the price I cant hack right now. Thanks again Link to post Share on other sites
charliethegreat Posted October 12, 2012 Report Share Posted October 12, 2012 I have the following available if it helps: Original M700 Hop Chamber Barrel plug Locking nut Original cocking piece Original bolt spring Original strike plate Original gas route connector spring Original bolt nozzle Original Hop unit BGS hop unit BGS buckings x 3 Grub screw Mag plunger Bolt screw (Flat head from middle of bolt I Think) Also have: AICS stock (originally Olive, sprayed black, well) Guarder Large rifle bag Tanaka AICS bipod adapter pin L96 style bipod with extendable legs 3-9 x 40 scope 40mm sunshade universal barrel mount Let me know if you are interested via PM Thanks Link to post Share on other sites
charliethegreat Posted October 14, 2012 Report Share Posted October 14, 2012 Updated: Original M700 Hop Chamber Barrel plug Locking nut Original bolt spring Original strike plate Original gas route connector spring Original bolt nozzle Original Hop unit BGS hop unit BGS buckings x 3 Mag plunger AICS stock (originally Olive, sprayed black, well) Guarder Large rifle bag Tanaka AICS bipod adapter pin L96 style bipod with extendable legs universal barrel mount (attach torches and lazers etc) KM-Head TN 6.04 587mm inner barrel (M700 Hop) EDGI 6.01 630mm inner barrel (never used) Link to post Share on other sites
Four Leaf Posted October 23, 2012 Report Share Posted October 23, 2012 Ok, so I picked up the original cocking piece of charliethegreat but I'm still thinking I'm missing pieces. Parts 34 & 35, the bolt detent and bolt detent spring. I beleive I'm also missing part 37, the rebound spring. If someone could have a look at the picture I posted I'd be most grateful (again) for any help. Ta, FL. Link to post Share on other sites
Geri Posted October 23, 2012 Report Share Posted October 23, 2012 So you take the cocking piece before me :-D now I can't fin nowhere an original piece... in turn I woud change my steel G&G to an original one if someone have it... :-D Link to post Share on other sites
charliethegreat Posted October 23, 2012 Report Share Posted October 23, 2012 lol yeh four leaf got the original, geri got the steel! I've got the AICS stock available if anyone is interested, will go cheap so PM for details Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.