Katotaka Posted June 1, 2016 Report Share Posted June 1, 2016 Is it real weather'd or painted? Either way it is awesome. Quote Link to post Share on other sites
renegadecow Posted June 1, 2016 Report Share Posted June 1, 2016 Painted. Some of the metal parts used are aluminum and galvanized steel so wouldn't really age as nicely/uniformly. Quote Link to post Share on other sites
3vi1-D4n Posted June 1, 2016 Report Share Posted June 1, 2016 Its cool. inconspicuous and looks like a post apocalypse contraption, or a play-pretend wooden gun kids built for the tree house  If only it did feed 45 ACP. Quote Link to post Share on other sites
renegadecow Posted June 1, 2016 Report Share Posted June 1, 2016 That's been my biggest gripe the whole time. It was so hard working around the Fallout design to work with a GBB while it would have been so much easier to make it work as a real straight blowback, full auto .45. Quote Link to post Share on other sites
3vi1-D4n Posted June 2, 2016 Report Share Posted June 2, 2016 I bet.  Though .45cal mags and bits of steel shouldn't be too hard to come by in Filies. Be keen to see one in .45cal. Quote Link to post Share on other sites
renegadecow Posted June 2, 2016 Report Share Posted June 2, 2016 Nope, but a license to make one is. I could make it in secret, but post it on YouTube or Facebook and I'm looking at ten years in prison. And I'm not talking cushy, first world, Breivik with a PlayStation prison. Quote Link to post Share on other sites
otacon14th Posted February 19, 2017 Report Share Posted February 19, 2017 (edited) Ghostbuster's Proton Pack AEG from the 80's movie "Ghostbuster"  - Base on Proton Pack plan by Stefan Otto and Proton wand plan by Sean Bishop - Version 1 gearbox, 225mm inner barrel, M249 hop -up chamber, 380 fps 25rps - Primary motorized magazine inside the pack (Synchronous Generator), secondary feed coil (Lonex flash mag) inside the proton wand - main battery located at the pack (Crank Generator) - All lighting effect working (Proton Wand, Cyclotron and Power cell) - Speaker and mp3 player at the pack (N-Filter) for sound effect  For videos https://www.youtube.com/watch?v=LlLitZ4KLVI&feature=youtu.be  * pic and videos courtesy of John Nieves - location CXG QC, Ph  Edited February 19, 2017 by otacon14th Quote Link to post Share on other sites
icolater Posted February 19, 2017 Report Share Posted February 19, 2017 Ha ha that is very very very cool!! Quote Link to post Share on other sites
Murdoc Posted February 19, 2017 Report Share Posted February 19, 2017 Pfff... Don't like such things... But that's fantastic... Â Maybe that's the only one worldwide, so it's impossible crossing the BB streams!!! Quote Link to post Share on other sites
wolfgeorge Posted February 23, 2017 Report Share Posted February 23, 2017 That's awesome man! Good job!Wolf Quote Link to post Share on other sites
GRIM! Posted February 24, 2017 Report Share Posted February 24, 2017  otacon14th This is the coolest build i have ever seen!!  Quote Link to post Share on other sites
Bamsesoft Posted February 25, 2017 Report Share Posted February 25, 2017 Hahaha, thats great - i love it. Quote Link to post Share on other sites
Katotaka Posted June 9, 2017 Report Share Posted June 9, 2017 Not sure where to post, I guess I'll just drop it here.  Finally got my (first) 3D printer, I was so excited and printed bunch of useless stuff lol  Saw a strike head for G5 before, but the $$ is little bit steep and that looks heavy, also not into that meat tenderizer pattern...  Did some measurements and printed my own in PLA (same stuff as bio BBs) , then painted black.   Quote Link to post Share on other sites
Wingman Posted June 9, 2017 Report Share Posted June 9, 2017 (edited) I wish someone would use this same process to make lightweight compensators for pistols and rifles. On many pistols, just that little bit of aluminium or steel weight on the end of the barrel can really screw-up functional reliability. Â By the way, your strike head came out looking great. Edited June 9, 2017 by Wingman Quote Link to post Share on other sites
Katotaka Posted June 9, 2017 Report Share Posted June 9, 2017 that's because those pistols are still loyal to browning style action - barrel has to drop to delay blowback    Recently most 2011 style race gun kits omits the drop to ensure smooooooooth cycle, and use VERY hearvy barrel & comp to dampen the recoil Although they lost some authentic-ness that way Quote Link to post Share on other sites
Wingman Posted June 10, 2017 Report Share Posted June 10, 2017 That I understand, but I'm not looking for the compensator to be put on a 2011 race gun. I'm trying to replicate my real steel IPSC 1911 from many, many years back that was based on a Colt 1911.  The compensator that matches pretty close, is the Punisher made by WE, but I dont believe it will fit on my TM. Quote Link to post Share on other sites
renegadecow Posted June 10, 2017 Report Share Posted June 10, 2017 A bushing comp? They make those for TM spec pistols too. Quote Link to post Share on other sites
Wingman Posted June 10, 2017 Report Share Posted June 10, 2017 Guess I will have to look harder then. The comp has to  be the same shape as the full end of the slide (height and width). The Punisher was the one that was the closest to the actual shape of the one that I had on my Colt. Wish I had pictures of it as it was really nice. Quote Link to post Share on other sites
druid799 Posted August 6, 2017 Report Share Posted August 6, 2017 (edited) Amazing what you can construct from the 'junk' box ! Built by Stwpid Bear dressed by me ! Â Edited August 6, 2017 by druid799 Quote Link to post Share on other sites
Batmause Posted August 7, 2017 Report Share Posted August 7, 2017 (edited) I see there is a custom-built gun topic where I forget to share my OTs-14 conversation. This one was made from WE/WELL AK74UN using my conversion kit. I also made a DaytonaGun version using an E&L AK74UN as donor. The parts was made by cnc-technology - carry handle, lower handguard, silencer, stock. Â Â Â Edited August 7, 2017 by Batmause Quote Link to post Share on other sites
Katotaka Posted October 9, 2017 Report Share Posted October 9, 2017 Grab the file and print yours if AR magwell is your thing  https://www.thingiverse.com/thing:2509328   As a side note I wish to share the G5 strike/bulk head above but I'm not very happy about the measurements, I think I will revise it in the feature Quote Link to post Share on other sites
Katotaka Posted October 9, 2017 Report Share Posted October 9, 2017 https://www.thingiverse.com/thing:2509328 Â Grab the file and print your own if AR magwell is your thing, or use services like 3DHubs if you don't have a printer. Â Â Â As a side note I wish I could share the G5 strike/bulk head above, but at further inspection of my earlier work I was not very happy about the measurements, I think I will revise the design before releasing it. Â Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.