Phuncz Posted December 10, 2009 Report Share Posted December 10, 2009 Yeah, it was about 5°C. Quote Link to post Share on other sites
weekenny Posted December 10, 2009 Report Share Posted December 10, 2009 That's been your problem with rate of fire and gas efficiency. The problem with your carrier not returning off the bolt catch sounds like its sticking a little try cleaning the upper out and adding a little lube to the carrier. Quote Link to post Share on other sites
Luis21 Posted December 11, 2009 Report Share Posted December 11, 2009 Anyone happen to have part #2 and #7 that they could sell to me? I need them URGETNLY. Thanks, -Luis Quote Link to post Share on other sites
Phuncz Posted December 11, 2009 Report Share Posted December 11, 2009 (edited) Apparently you can't search for 3-letter words so I can't find anything on supported RIS or RAS upgrades. Anyway: which RIS/RAS's will fit on the standard AGM M4A1, the one with the plastic handguard ? Without changing receivers or outer barrels and such. I'm loving this look, without the handle though: Anyone ? Edited December 11, 2009 by Phuncz Quote Link to post Share on other sites
snorkelman Posted December 12, 2009 Report Share Posted December 12, 2009 speculation on my part as I haven't fitted that setup to confirm one way or the other, but: 1 I'd expect issues with level of the top rail versus the upper on the rifle (which is going to be all the more noticable on that style of front set where one is meant to be a seamless extension of the other) 2 using the barrel nut supplied with that front end you'ld most likely need to move over to a thin shouldered barrel, and away from the thick shouldered WA style barrel that AGM use on the 061/062 models if you opt to go the other way i.e. a standard KA RIS where normal AR delta ring is used, then you'ld likely just have to grind off the two knobbly bits on front face of the AGM delta ring, and dump the original AGM 061 undersized plastic end cap in favour of a conventional pressed metal one as I *think* that's all the mods required to get that sort to fit Quote Link to post Share on other sites
Phuncz Posted December 13, 2009 Report Share Posted December 13, 2009 Hmm basically there is no easy way... Thx for the advice. I'm actually thinking about a G&P Front set for WA rifles, would that be a better bet to start with ? I actually destroyed the black spring thingy between the barrel nut and the delta ring, so I'd better be off with a RIS/RAS that doesn't need it. I compared the barrel nut from my JG M4 AEG and the AGM M4 GBBR, also tried the RAS from the JG on it. Indeed, it didn't line up but also moved about freely. Bummer. Quote Link to post Share on other sites
Pradal-Serey Posted December 13, 2009 Report Share Posted December 13, 2009 still no news about the avaibility of this? Quote Link to post Share on other sites
1st Commando Posted December 13, 2009 Report Share Posted December 13, 2009 (edited) does anyone have any idea where I could get hold of a replacement Npas adjustment key ? I picked up my AGM M4 today but stored the npas key somewhere safe and now can't remember which safe place in my kit I put it Cancel my last transmission , I just found it in my Guarders case It still might be useful for folks to know where spares can be bought though Edited December 13, 2009 by 1st Commando Quote Link to post Share on other sites
1st Commando Posted December 13, 2009 Report Share Posted December 13, 2009 I have found spare Npas keys for £10 at Eliteshooting centre in the UK Quote Link to post Share on other sites
Hite Posted December 15, 2009 Report Share Posted December 15, 2009 Just out of curiosity, has anyone tried this rifle (rifle design) with the aeg hopup that you can get and a TK twist barrel. I imagine it would do the shot to shot consistency of the rifle some good. Quote Link to post Share on other sites
UrPeaceKeeper Posted December 15, 2009 Report Share Posted December 15, 2009 (edited) still no news about the avaibility of this? http://www.brotherprice.com/ebphoto/aabb%2...um%20nozzel.jpg No, but I noticed if you go and click on the "reviews" on Ebaybanned there is a button that says "Add to Cart" or something along those lines that you can add it to your cart I'm not sure if they will then send one off or not Thats the only aluminum loading nozzle I could find other than the RA-Tech one, that wasnt extortionately priced or included a full bolt carrier... I was talking with snorkleman a few weeks ago about the ACM M4 GBB and this was one of the upgrades on that list, it seems that I will be using the stock ACM loading nozzle untill either this comes out or another inexpensive one does. I could not find that air nozzle on any other webpage either Edited December 15, 2009 by UrPeaceKeeper Quote Link to post Share on other sites
Luis21 Posted December 15, 2009 Report Share Posted December 15, 2009 They should have that AABB aluminum loading nozzle sometime next month or after Chinese New Year. While the RA-Tech gen. 2 loading nozzle is really nice, I still won't buy it. I'd rather buy this one and save. -Luis Quote Link to post Share on other sites
ThaFlash Posted December 15, 2009 Report Share Posted December 15, 2009 I'll be waiting to see how it is. After some work, I love my RATech parts. The new lightened bolt looks cool but if you can get the same for less then... yeah. Quote Link to post Share on other sites
Luis21 Posted December 15, 2009 Report Share Posted December 15, 2009 I'll be waiting to see how it is. After some work, I love my RATech parts. The new lightened bolt looks cool but if you can get the same for less then... yeah. Yup, that's how I see it. -Luis Quote Link to post Share on other sites
stirrat Posted December 15, 2009 Report Share Posted December 15, 2009 Just out of curiosity, has anyone tried this rifle (rifle design) with the aeg hopup that you can get and a TK twist barrel. I imagine it would do the shot to shot consistency of the rifle some good. The TK twist barrel will not work well if your rifle shoots over 330fps, they were designed for japans low fps limits and anything over 330fps will suck, considering that most GBB shoot quite hot, its gonna suck big time! Quote Link to post Share on other sites
Luis21 Posted December 15, 2009 Report Share Posted December 15, 2009 The TK twist barrel will not work well if your rifle shoots over 330fps, they were designed for japans low fps limits and anything over 330fps will suck, considering that most GBB shoot quite hot, its gonna suck big time! Yeah, well said. It's meant to help low-fps guns achieve the most effective range and accuracy. -Luis Quote Link to post Share on other sites
Hite Posted December 16, 2009 Report Share Posted December 16, 2009 Luckily in the UK 330 fps is the limit. However I was reading in the KJ thread that the grouping was improved by by half with a tk barrel at 400 fps I believe. Quote Link to post Share on other sites
chownsy Posted December 16, 2009 Report Share Posted December 16, 2009 Anyone fitted a barrel mounted 203 to an 061 by any chance? I quite like the look of the Dboys version with the quick release front mount, but the CA launcher I have doesn't fit anywhere near so I'm a little hesitant. i have managed to fit a KA one to my one (but i had to remove the front sight then slide on the m203, then slide the sight on, also the handguards will need a bit cutting out of them. I had to remove it because the barrel fell off (AGM poor quality), once i fix the barrel ill put it on and show a pic. Quote Link to post Share on other sites
weekenny Posted December 16, 2009 Report Share Posted December 16, 2009 The TK twist barrel will not work well if your rifle shoots over 330fps, they were designed for japans low fps limits and anything over 330fps will suck, considering that most GBB shoot quite hot, its gonna suck big time! Rifled barrels are not just for below 330fps they should improve accuracy and range regardless of muzzle velocity. Quote Link to post Share on other sites
Hite Posted December 16, 2009 Report Share Posted December 16, 2009 Yeah I imagine the science behind the twist barrel shouldn't be fps dependant when it comes to the consistency bonuses. Quote Link to post Share on other sites
weekenny Posted December 16, 2009 Report Share Posted December 16, 2009 "proper" air rifles have had them for some time. Quote Link to post Share on other sites
Guardsman Posted December 16, 2009 Report Share Posted December 16, 2009 but air rifles have "proper" rifled barrels, these airsoft rifled barrels work differently. i believe they work buy creating a cussion of air around the bb, not by imparting spin as you would with a traditional rifled barrel. Quote Link to post Share on other sites
stirrat Posted December 16, 2009 Report Share Posted December 16, 2009 Yes and many people, including myself have used one on their aeg's and have found that, unless the fps is around 1J< then the accuracy is crappy. A smooth spherical bb travelling through a rifled barrel will not achieve that great accuracy, its a bb not a bullet! Nice idea but not really practical for a bb, hence why not everyone's using them?! Quote Link to post Share on other sites
1st Commando Posted December 16, 2009 Report Share Posted December 16, 2009 but used as intended below 350 fps and they work very well Quote Link to post Share on other sites
stirrat Posted December 16, 2009 Report Share Posted December 16, 2009 aye! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.