judgeman Posted July 30, 2010 Report Share Posted July 30, 2010 New A&K. Will post pics with night vision scope later. Quote Link to post Share on other sites
EOL Posted August 6, 2010 Report Share Posted August 6, 2010 My A&K with woodkit mounted. Quote Link to post Share on other sites
Mr. Blue Posted August 6, 2010 Report Share Posted August 6, 2010 Posted this in another thread, but It Cant hurt to Have more pretty SVD pictures... Got to meet up with a benefactor last night at the machine shop. Suprise Suprise in his trunk, a recently CA-legal converted SVD. Got a chance to play with it = OMG A few Comparisons between the A&K SVD and a Norinco NDM-86 NDM-86 AtoZ with A&K Body King Arms SVD Handguard comparison... The real ones have a slimmer profile and thicker cross section. Feel very good in the hands. This one is very blonde. NDM-86 stock vs AtoZ... The real one is again thinner in profile, feels really good in hand. More solid and heavier. Shallower grip angle, very slight but you can feel it. Blonde. Receiver Comparisons. Russian Nightscope on the King arms. Does work but recticle is slightly askew. General Observations... Not bad for a $200 gun vs the $6500 real thing ( ok, its chinese, but thats better than a psl). The receiver on the airsoft one is heaver than the real one, as well as the top cover. Only small differences in terms of curves on the rear stock. Real trigger group fits into the A&K/KA body... So, why were so many SVD's housed in a small machine shop? My benefactor and I want GBB Svd's... Quote Link to post Share on other sites
Tariel Posted August 6, 2010 Report Share Posted August 6, 2010 Question regarding SVD's, Is there a 20mm RIS that can go on top of the reciever to allow regular scopes to be mounted? As far as bipods, can other types be mounted to them too? I know these things detract from the origonality of the SVD, but I would like those for mine if I buy one. Quote Link to post Share on other sites
WL-Matt Posted August 6, 2010 Report Share Posted August 6, 2010 (edited) Question regarding SVD's, Is there a 20mm RIS that can go on top of the reciever to allow regular scopes to be mounted? As far as bipods, can other types be mounted to them too? I know these things detract from the origonality of the SVD, but I would like those for mine if I buy one. You can buy a RIS side mount for SVD. I have heard some AK ones work, but I would try to get an SVD one. No idea on a supplier though, I like my eastern block scopes. For the choice of bipods you can get the SVD bipod that clamps onto the revceiver indents. http://www.gunnerairsoft.com/catalog/product_info.php?products_id=1802 Or a clamp on barrel model like this. http://www.airsoftgi.com/product_info.php?products_id=855 Edited August 6, 2010 by WL-Matt Quote Link to post Share on other sites
WL-Matt Posted August 7, 2010 Report Share Posted August 7, 2010 My A&K arrived yesterday, awaiting its scope. Comparison to others. Quote Link to post Share on other sites
Mr. Blue Posted August 10, 2010 Report Share Posted August 10, 2010 Hey guys, I posted these pics in this Thread A Dragunov SVD Custom From Stock to Something Wicked but I figured I'd post them here too! Once I source a set of Black grips. I'll do a more fancy photo shoot Quote Link to post Share on other sites
Donut Posted August 16, 2010 Report Share Posted August 16, 2010 Felt like posting something Figured it'd be alright here, since it started out as an Atoz SVD VSS Vintorez WIP Almost done http://www.arniesairsoft.co.uk/forums/index.php?showtopic=188610 Quote Link to post Share on other sites
EOL Posted August 19, 2010 Report Share Posted August 19, 2010 Here is a better pic of my A&K with laminated wood Quote Link to post Share on other sites
Horsem4n Posted August 19, 2010 Report Share Posted August 19, 2010 Question regarding SVD's, Is there a 20mm RIS that can go on top of the reciever to allow regular scopes to be mounted? As far as bipods, can other types be mounted to them too? I know these things detract from the origonality of the SVD, but I would like those for mine if I buy one. i didnt see this until now, but kalinka optics has cheapish scope mounts. they have 4 models, being high and low pro. 20mm mounts with and without side rails. example: this is the one i bought for my A&K but it didnt quite fit the 1st gen A&K, so i had to grind down a couple areas of the mount. Quote Link to post Share on other sites
Weflect Posted September 5, 2010 Report Share Posted September 5, 2010 Real Sword SVD with real scope and sling. Quote Link to post Share on other sites
Schultz98 Posted September 5, 2010 Report Share Posted September 5, 2010 beautiful svd Quote Link to post Share on other sites
CapaciousZepher Posted September 30, 2010 Report Share Posted September 30, 2010 (edited) - Zepher Edited September 30, 2010 by CapaciousZepher Quote Link to post Share on other sites
MrM60 Posted October 1, 2010 Report Share Posted October 1, 2010 Nice. Here's my Real Sword SVD. Quote Link to post Share on other sites
dt00th Posted October 3, 2010 Report Share Posted October 3, 2010 i do like them in black Quote Link to post Share on other sites
tangloppen Posted October 3, 2010 Report Share Posted October 3, 2010 Sneakpeek... Quote Link to post Share on other sites
Horsem4n Posted October 3, 2010 Report Share Posted October 3, 2010 (edited) Bullpup? nowaynowaynowaynowaynowaynowaynoway!!!!! i must see moar pics!!!!! Edited October 3, 2010 by Horsem4n Quote Link to post Share on other sites
dt00th Posted October 3, 2010 Report Share Posted October 3, 2010 there was a bullpup ak in real steel but have never seen an svd version Quote Link to post Share on other sites
Schultz98 Posted October 3, 2010 Report Share Posted October 3, 2010 called the SVU, its a bullpub version of the svd Quote Link to post Share on other sites
Horsem4n Posted October 4, 2010 Report Share Posted October 4, 2010 well, i knew about the real SVU, but im just excited to see an airsoft one. Quote Link to post Share on other sites
CapaciousZepher Posted October 4, 2010 Report Share Posted October 4, 2010 well, i knew about the real SVU, but im just excited to see an airsoft one. I'll second that. It's a project I've wanted to do for a long time. - Zepher Quote Link to post Share on other sites
tangloppen Posted October 4, 2010 Report Share Posted October 4, 2010 More pics will come soon... Quote Link to post Share on other sites
jvj(a.o.t) Posted October 10, 2010 Report Share Posted October 10, 2010 (edited) A buddy and mine SVD's Note that mine is a ver.2 from RS, therefore it is not so "shinny". Edited October 10, 2010 by jvj(a.o.t) Quote Link to post Share on other sites
Lajjvo Posted October 10, 2010 Report Share Posted October 10, 2010 Oh what sexy beasts they are. If only i could justify buying one Quote Link to post Share on other sites
Schultz98 Posted October 10, 2010 Report Share Posted October 10, 2010 I really hate the fact that the newest v2 svds have that non shineyness to them. The earliest v2 like mine had the nicer looking body but I head the newest v2 have some new stuff inside the gearbox so I geuss theres a tradeoff.. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.