alston251 Posted April 22, 2010 Report Share Posted April 22, 2010 Started life as a full size M16 solid stock I really like the two tone colour scheme. Link to post Share on other sites
The Vainguard Posted April 22, 2010 Report Share Posted April 22, 2010 There are some OUTSTANDING guns in this thread... I really need a ELCAN Specter Dr. now... TEKNO - What stock is that/What cheek rest addition is that? Link to post Share on other sites
TEKNO Posted April 22, 2010 Report Share Posted April 22, 2010 TEKNO - What stock is that/What cheek rest addition is that? Its a TDI Arms - Collapsable butt Stock and TDI Arms Adjustable Cheek Piece Link to post Share on other sites
aznriptide859 Posted April 23, 2010 Report Share Posted April 23, 2010 Hooray for Docter's on risers! How much are RS Docter's anyways? Link to post Share on other sites
uscmCorps Posted April 23, 2010 Report Share Posted April 23, 2010 How much are RS Docter's anyways? Bought it a long time ago. Think it was $400 +/-. If I were to buy one now, I'd get a Trijicon RMR Dual Illuminated Sight instead. I'm still using the first battery on the Docter, but the Trijicon RMR's fiber optics and tritium power is hard to beat. Link to post Share on other sites
fiddlesticks4220 Posted April 23, 2010 Report Share Posted April 23, 2010 I vote you throw the VFC LMT stock from one of your SR's on that LMT. Link to post Share on other sites
uscmCorps Posted April 23, 2010 Report Share Posted April 23, 2010 I vote you throw the VFC LMT stock from one of your SR's on that LMT. I tried to briefly the other night. The VFC LMT stock was SUPER tight. It was severe enough I didn't push it. I'll probably switch to a CTR or MOE eventually. I'm even contemplating an ACS, though that might be too bulky. Link to post Share on other sites
Pdubyuh Posted April 23, 2010 Report Share Posted April 23, 2010 My new Lwrc M6a2 not fired it yet as it only arrived yesterday feel its 6.8mm SPC goodness Link to post Share on other sites
Ivan le Fou Posted April 23, 2010 Report Share Posted April 23, 2010 Uscm >> is that the G&P MRP? Link to post Share on other sites
uscmCorps Posted April 23, 2010 Report Share Posted April 23, 2010 Uscm >> is that the G&P MRP? Yup. Probably nicer than my BestGun MRPs. And a lot cheaper. Link to post Share on other sites
pnguyen Posted April 23, 2010 Report Share Posted April 23, 2010 i can finally say i'm done putting money into this damn gun! Link to post Share on other sites
[NL]Infinity Posted April 23, 2010 Report Share Posted April 23, 2010 i can finally say i'm done putting money into this damn gun! Looks like it was worth it!! Link to post Share on other sites
Ivan le Fou Posted April 23, 2010 Report Share Posted April 23, 2010 Yup. Probably nicer than my BestGun MRPs. And a lot cheaper. Oh great! Because that is the one I will buy by the end of the month. Link to post Share on other sites
uscmCorps Posted April 23, 2010 Report Share Posted April 23, 2010 pnguyen: I like the dramatic effect of that pic. Nicely done! Oh great! Because that is the one I will buy by the end of the month. Yeah, it's one of my favorite G&P guns right now. I would recommend at least swapping the bucking to a Guarder Clear and the nub to an Element or Big Out H-Nub. I also swapped the barrel to a KM tightbore, and the hopUp to a Madbull HopUp, but these last two changes are less dire than the bucking and nub. The default bucking and nub are (IMO) not good at all. But I expect a lot out of my guns. Link to post Share on other sites
-=OGGY=- Posted April 23, 2010 Report Share Posted April 23, 2010 uscm, that SR15 is perfect. That is almost exactly how I was planning to set up my GBB SR15 and your pics just made up my mind. +1 -OGGY Link to post Share on other sites
fiddlesticks4220 Posted April 23, 2010 Report Share Posted April 23, 2010 I tried to briefly the other night. The VFC LMT stock was SUPER tight. It was severe enough I didn't push it. I'll probably switch to a CTR or MOE eventually. I'm even contemplating an ACS, though that might be too bulky. Maybe time to swap the buffer tubes around ... hehe. (Sorry, I just really dislike the G&P stock ) PS, I need a new wallpaper, lets see some family pics !!! Link to post Share on other sites
uscmCorps Posted April 23, 2010 Report Share Posted April 23, 2010 Maybe time to swap the buffer tubes around ... hehe. (Sorry, I just really dislike the G&P stock ) The G&P buffer tubes are great. It's the VFC stock that seems a bit tight. Link to post Share on other sites
bbondaloose Posted April 23, 2010 Report Share Posted April 23, 2010 I really like the simplicity of it Link to post Share on other sites
spetsnazdave87 Posted April 24, 2010 Report Share Posted April 24, 2010 very nice Im trying to build a Blood Diamond carbine at the moment, my parts are coming very slowly from HK... Link to post Share on other sites
fiddlesticks4220 Posted April 24, 2010 Report Share Posted April 24, 2010 (edited) The G&P buffer tubes are great. It's the VFC stock that seems a bit tight. Correct, put a new buffer on the G&P and throw the VFC on that buffer. FAMILY PICS NAOW !!! Edited April 24, 2010 by fiddlesticks4220 Link to post Share on other sites
uscmCorps Posted April 24, 2010 Report Share Posted April 24, 2010 Correct, put a new buffer on the G&P and throw the VFC on that buffer. The buffer tube's fine. I think the VFC SOPMOD stock might be unusually tight. I'm gonna test it with a MOE and a CTR I have lying around (I always have a few of those lying around). FAMILY PICS NAOW !!! I don't have enough megapixels for a group shot. Link to post Share on other sites
Short Stack Posted April 24, 2010 Report Share Posted April 24, 2010 I hate this thread and the magpul thread because everyone posts up there $700+ guns and it makes me want everything! Grrr! Lol! Link to post Share on other sites
trinco Posted April 24, 2010 Report Share Posted April 24, 2010 My WE M4 GBBR Link to post Share on other sites
oRb Posted April 24, 2010 Report Share Posted April 24, 2010 Hello guys! Here a few pictures of my old M16A2 AEG! There alot Real Parts on it like Frontsight, Handguard & Cap, Dust Cover & M16 Stock. The rest of the gun is G&P & Guarder mixed! The Receiver is a G&P Burst A2 and the Rifle already comes with the Burst function. Got the Trigger Master Burst Function Kit installed! I originally bought this beauty in 2003 but later in 2005 I swaped in the G&P Burst A2 Receiver instead of the poor Hurricane. This is now a classic. I love oldschool Rifles. Desert Storm Rules More later! Regards orb Link to post Share on other sites
Recommended Posts