Extraordinaire Posted February 11, 2012 Report Share Posted February 11, 2012 Spotted this on ebAirsoft's main page today. http://www.ebairsoft.com/pmag-maglevel-p-5444.html Not sure if this has been posted already. Looks to be the M-version answer to the G36 platforms at 120rd capacity. Also looks to be a two-piece design as the AR M-versions. Discuss! -Ex Link to post Share on other sites
bankz5152 Posted February 11, 2012 Report Share Posted February 11, 2012 ooo very very nice! I wonder if you could fit the internals from a gas mag in there! Link to post Share on other sites
LordElpus Posted February 11, 2012 Report Share Posted February 11, 2012 ok, time to buy a g36 again. Link to post Share on other sites
Wingmann Posted February 11, 2012 Report Share Posted February 11, 2012 Thinner, thus finally generic pouch friendly? If so, sounds good. Link to post Share on other sites
carbonfibreguy Posted February 11, 2012 Report Share Posted February 11, 2012 About damned time! I was ready yesterday to go out and buy an adapter and some M4 PMAGS, I thought I've been waiting too long for the G36 Pmags ever since I saw them for the real steel version. I can't wait to get a hold of these! /superexcited.png Link to post Share on other sites
ollie_ty Posted February 11, 2012 Report Share Posted February 11, 2012 DO WANT. Link to post Share on other sites
aznriptide859 Posted February 11, 2012 Report Share Posted February 11, 2012 ok, time to buy a g36 again. Seriously. About damn time PTS! Link to post Share on other sites
RSM Posted February 11, 2012 Report Share Posted February 11, 2012 Hmm, G36C with tan trim, PMAGS, AFG, stock tube adaptor and ACS stock? Link to post Share on other sites
LordElpus Posted February 11, 2012 Report Share Posted February 11, 2012 I was thinking more full length g36 with pmags, stocktube adaptor and the prs stock. Link to post Share on other sites
ollie_ty Posted February 11, 2012 Report Share Posted February 11, 2012 I was thinking G36, with original EVERYTHING, and PMAGS Link to post Share on other sites
aznriptide859 Posted February 11, 2012 Report Share Posted February 11, 2012 Don't forget that new VFC rail, those would top it off nicely. Link to post Share on other sites
bladerunner168 Posted February 11, 2012 Report Share Posted February 11, 2012 If only they would work with the TM recoils............ Link to post Share on other sites
aznriptide859 Posted February 11, 2012 Report Share Posted February 11, 2012 Couldn't you fit one of those Freedom Art adapters like they have for the M4? Link to post Share on other sites
RWJP Posted February 11, 2012 Report Share Posted February 11, 2012 If only they would work with the TM recoils............ I was under the impression that TM recoil G36s used standard AEG G36 mags anyway? I've certainly never seen specific mags for the recoil G36s... Link to post Share on other sites
bladerunner168 Posted February 11, 2012 Report Share Posted February 11, 2012 I was just wary that they stated: Compatibility: Tokyo Marui Type G36 AEG (Non-SopMod) which was their way to say it won't work on the recoil ones. But if they do work, then I feel the need to start saving for a G36C reocoil. Link to post Share on other sites
Horsem4n Posted February 11, 2012 Report Share Posted February 11, 2012 Well, finally have an excuse to pick up an src XM8. Link to post Share on other sites
NeoVeNoM Posted February 12, 2012 Report Share Posted February 12, 2012 I'll take 10! Link to post Share on other sites
Extraordinaire Posted February 12, 2012 Author Report Share Posted February 12, 2012 I'm wanting to build a G36c with the replica B&T Rail and run these. I think that would look great. Main reason I rid myself of my G36 was the size of the magazines. Time to start saving for about 5 of these. They're supposed to retail around $22.95, but I fear that will climb to about $29.95 once they hit the states as is the case with the AR M-versions. -Ex Link to post Share on other sites
Megalomaniac Posted February 12, 2012 Report Share Posted February 12, 2012 Okay so that one more magazine off the plate, which means maybe hopefully PTS PMAGs for the SOPMOD/SOCOM line next? Link to post Share on other sites
uscmCorps Posted February 12, 2012 Report Share Posted February 12, 2012 MSRP should be the same as the current line of PTS AR-15 PMAGs, which is around $22-23 each. There are various US dealer selling the AR-15 PMAG at that exact price point including AirsoftExtreme: http://www.airsoftextreme.com/store/index.php?main_page=product_info&cPath=83_84_92&products_id=4770 http://www.airsoftextreme.com/store/index.php?main_page=product_info&cPath=83_84_92&products_id=4769 Regarding the PTS PMAGs for the TM SOPMOD/SOCOM lineup, it is unclear as to whether or not that product will be produced now that the PTS/KWA AR-15 ERGs have been announced which use their own proprietary magazines. Link to post Share on other sites
WhiteHawksan Posted February 12, 2012 Report Share Posted February 12, 2012 surely PTS could do both? It's commercially shooting yourself in the foot to not support TM products. Link to post Share on other sites
BerserkDS Posted February 12, 2012 Report Share Posted February 12, 2012 Or shells, id be happy with shells to convert my existing mags. Link to post Share on other sites
uscmCorps Posted February 12, 2012 Report Share Posted February 12, 2012 surely PTS could do both? It's commercially shooting yourself in the foot to not support TM products. I know it would seem like an obvious decision to go ahead and do it, but there are so many projects currently being worked on, developed, and in production, it's hard to devote resources to another product line that has limited market saturation for a long time now and remains so at present. While TM has generally been the standard for most AEG systems for years now, their new SOPMOD system has not gained the foot hold into the market as everyone originally expected it would upon release. While PTS has not shied away from projects with niche like properties, niche products have rarely been as successful in regards to sales as compared to the products that appeal to the mass market. PMAGs for the SOPMOD may one day be revisited. Or shells, id be happy with shells to convert my existing mags. Now that isn't a bad idea since the shell is relatively simple to implement. Noted. I'll mention that. Link to post Share on other sites
AMC1096 Posted February 12, 2012 Report Share Posted February 12, 2012 I wonder if the new G36 Mags will fit in the KWA G36. However, I highly doubt it will actually fit. If it doesn't then it will be time to break out the sand paper!! Link to post Share on other sites
Megalomaniac Posted February 12, 2012 Report Share Posted February 12, 2012 So then it is confirmed that the ERG's run different magazines than the TM? I assumed that they ran the same after allizard mentioned that the KWA ERG runs a similar hop-up and gearbox compared to the TM. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.