CaptCalvin Posted December 14, 2015 Report Share Posted December 14, 2015 Didn't think of that... most mil spec buffer tubes don't have such a ridge that run from the threads to the 6 position piece. Link to post Share on other sites
Alias1983 Posted December 14, 2015 Report Share Posted December 14, 2015 Very interesting. Link to post Share on other sites
The Insider Posted December 23, 2015 Report Share Posted December 23, 2015 ok... so like there was a meeting with das management, but sadly I'm been sworn to secrecy.But the little i can leak is to only confirm what has already been stated here which was the price will be up there with the PTW.And correct another point I mentioned previously which was they would be available in Jan, But the new fact is there maybe a few samples to tour a few shops for pre-order planing... in February. The exact release date is not yet known.The other details i know are limited to production location, distribution, and quantities planned, so kinda irrelevant here anyways. still... moms the word.But as soon as i have a sample on hand... you will be the first to know.well no the... second...well ok.. the 12th to know... you will be like the 12th to know.. as a have a friends to pimp it out to first... but still... 12th in the whole world... its pretty good. Link to post Share on other sites
kullwarrior Posted December 23, 2015 Report Share Posted December 23, 2015 ok... so like there was a meeting with das management, but sadly I'm been sworn to secrecy. But the little i can leak is to only confirm what has already been stated here which was the price will be up there with the PTW. Any idea what the material/ finishing method are? ie Die cast Zn-Al + CNC finish? (this is how PTW bodies are made AFAIK) Link to post Share on other sites
Cire_ Posted January 1, 2016 Report Share Posted January 1, 2016 Are they gonna release more information on how it works? Link to post Share on other sites
The Insider Posted January 7, 2016 Report Share Posted January 7, 2016 Any idea what the material/ finishing method are? ie Die cast Zn-Al + CNC finish? (this is how PTW bodies are made AFAIK) Materials of the prototype at least (eg: may change for production). Front / Rear sights are steel, Receiver is CNC aluminum, Bolt Carrier is currently zinc alloy. No details on finish. Are they gonna release more information on how it works? eventually i'm sure, but obviously it should be gears pull back bolt... i guessing... a few other details that should be obvious,... its shoots 6mm... lol And shooting mode is of cause is safe, semi and full auto. But semi only models may also offered. and hop up: Of cause Weight : 3000g Length : 780 /860mm Barrel Length : 380mm Mag : 40 to 80rds FPS : 295 to 410 fps Joules : 0.8 to 1.6J MPS : 90 to 120mps One other juicy tidbit... is on a low / no / dead battery it will be aircockable for a single shot... lol. But other than that... I know nothing...nothing... Link to post Share on other sites
The Insider Posted January 7, 2016 Report Share Posted January 7, 2016 oh yeah... some random pics of the over shoulder trick.... Link to post Share on other sites
Bastel Posted January 7, 2016 Report Share Posted January 7, 2016 Thanks mate. Maybe a stupid question, but has it a bolt lock function? Link to post Share on other sites
Isamu Posted January 7, 2016 Report Share Posted January 7, 2016 Holy fruitcage dude! stop with the info already or I will ned up buying one with my summer holidays savings just kidding, keep it coming and fruitcage holidays Bastel: If you look into the videos, you can see the bolt locks. Link to post Share on other sites
Alias1983 Posted January 7, 2016 Report Share Posted January 7, 2016 Electric bolt Link to post Share on other sites
The Insider Posted January 26, 2016 Report Share Posted January 26, 2016 it seems a distributor has poped up with a few more pictures and intellI believe they are from a local magazine pre-view.https://www.facebook.com/soltachk/ and i would assume when available the first models would be appearing here.http://www.soltachk.com/ Link to post Share on other sites
Got Wood? Posted January 26, 2016 Report Share Posted January 26, 2016 If this works as well as we all hope then I could be tempted back to the M4 range... Link to post Share on other sites
AG1212 Posted February 1, 2016 Report Share Posted February 1, 2016 https://www.youtube.com/watch?v=sglLi5lHyYs New video Link to post Share on other sites
Alias1983 Posted February 2, 2016 Report Share Posted February 2, 2016 Saw that a few ago, very intrigued still but I don't know if its worth it to change over(or just for a winter gun) yet. Link to post Share on other sites
Horsem4n Posted February 2, 2016 Report Share Posted February 2, 2016 that's actually a very cool combination of airsoft sniper rifles and AEGs. id really like to see this get popular and see AKs come out. i may pick this up and see what can be done. Link to post Share on other sites
AG1212 Posted February 2, 2016 Report Share Posted February 2, 2016 The design seems pretty straightforward, in the sense that it's using existing airsoft tech. I don't see why it couldn't be reliable if quality material like steel and aluminium is used. My major concern is power output and performance. Link to post Share on other sites
blobface Posted February 2, 2016 Author Report Share Posted February 2, 2016 My major concern is power output and performance. While I can't speak for performance, but the power output is spec'd at 294 - 410 fps, which is plenty good enough for most of us. Link to post Share on other sites
TheFull9 Posted February 2, 2016 Report Share Posted February 2, 2016 Did we ever confirm if it pre-cocks or not? I can't remember. Sure hoping it can put out a decent semi response. I mean it's just an ICS/PTW that functions more aesthetically realistically right? Well.. ish Link to post Share on other sites
Isamu Posted February 2, 2016 Report Share Posted February 2, 2016 id really like to see this get popular and see AKs come out. Exactly my thoughts =D Link to post Share on other sites
Zereck Posted February 2, 2016 Report Share Posted February 2, 2016 There is also a small preview on Hyperdouraku's site. Link to post Share on other sites
Horsem4n Posted February 3, 2016 Report Share Posted February 3, 2016 I can confirm that it pre cocks. in front of the buffer there is a wedge, that wedge is the spring guide stopper (think VSR10 or APS2) and just in front of that is a sear. this is essentially an auto cocking spring sniper rifle, but much more well refined. think of a VSR10 with a gear rack at the bottom of the cylinder and a return spring behind the bolt. when the gun fires from a cocked position, the gun then re cocks the bolt using AEG tech and sets the piston back on the sear and automatically returns forward to load a BB. looks to have ultra high torque gears though, so the highest ROF you could probably get out of it is like 14-16 RPS. but that would be really fast for that much material to be thrown back and forth. you could also think of it as a PSG1 with a bolt carrier around the piston. the way its designed, it wouldn't need a mosfet, so hopefully we can fit something existing in there if it doesn't have one. plus, check out dat beefy bolt catch. Link to post Share on other sites
Bastel Posted February 9, 2016 Report Share Posted February 9, 2016 https://www.facebook.com/gbls.co.kr/photos/a.1560707677585941.1073741828.1547632955560080/1560707660919276/?type=3&theater Link to post Share on other sites
CaptCalvin Posted February 12, 2016 Report Share Posted February 12, 2016 I suspect the bcg to be made out of plastic. The gun looks like it barely had any recoil at all for such a fast moving bolt. Link to post Share on other sites
kilo_64 Posted February 13, 2016 Report Share Posted February 13, 2016 I suspect the bcg to be made out of plastic. The gun looks like it barely had any recoil at all for such a fast moving bolt. Did you see this? Link to post Share on other sites
The Insider Posted February 13, 2016 Report Share Posted February 13, 2016 id really like to see this get popular and see AKs come out. Exactly my thoughts =D You will be surprised to know your thoughts... and reality are surprisingly similar... as this will be following the M4 quite quickly... apparently, maybe, possible like... very soon like. Still... one needs to walk before they can run. The Full CNC "dealers samples" of the DAS m4 are under construction... ATM i guess and should be seen next month. The first "honest" performance reviews will be most interesting. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.