skyler8158 Posted May 11, 2006 Report Share Posted May 11, 2006 http://www.uncompany.com/pageproductdetails.asp?prodid=7463 Also out is there version of those short SPR barrel sets: http://www.uncompany.com/pageproductdetails.asp?prodid=7462 Link to post Share on other sites
Hustie Posted May 11, 2006 Report Share Posted May 11, 2006 Awsome! Does anyone know if the AG36 fits the entire CA36 lineup? Because it looks like it comes with a seperate foregrip that you attach to the gun. I'm liking that short SPR barrel too... Link to post Share on other sites
Glenn Posted May 11, 2006 Report Share Posted May 11, 2006 Awsome! Does anyone know if the AG36 fits the entire CA36 lineup? Because it looks like it comes with a seperate foregrip that you attach to the gun. I'm liking that short SPR barrel too... <{POST_SNAPBACK}> The AG36 is a foregrip, with a grenade launcher attached. It'll fit any G46 out there, although it'll look pretty dumb on a C length gun. Link to post Share on other sites
demon.b Posted May 11, 2006 Report Share Posted May 11, 2006 Is the AG36 foregrip the same length as a K or the full size rifle? Just curious, want one anyway! *wonders which organ to sell next* Link to post Share on other sites
Robot 2000 Posted May 11, 2006 Report Share Posted May 11, 2006 Hell. Yeah. *waits for G36 to arrive*. Link to post Share on other sites
staticzero Posted May 11, 2006 Report Share Posted May 11, 2006 Fricken finally. It's probably just a copy of the Star version but it's not $400 so yay! It looks like it's missing all the markings but the handguard plastic is bound to look as good as CA's usually does and the metal stuff all looks pretty sharp. I'm looking forward to getting one of these. In celebration: Is the AG36 foregrip the same length as a K or the full size rifle? Just curious, want one anyway! *wonders which organ to sell next* <{POST_SNAPBACK}> G36 length, but it's appropriate to put it on either the G36 or the G36K as you can see in the above pictures. Link to post Share on other sites
Crazy_Harry Posted May 11, 2006 Report Share Posted May 11, 2006 damn damn damn! had just FINALLY made up my mind to start saving for a CA AUG, but that AG36 is too damn sexy and cheap to pass up- might have to get the g36k afterall... Link to post Share on other sites
HKG36 Posted May 11, 2006 Report Share Posted May 11, 2006 Fricken finally. It's probably just a copy of the Star version but it's not $400 so yay! It looks like it's missing all the markings but the handguard plastic is bound to look as good as CA's usually does and the metal stuff all looks pretty sharp. I'm looking forward to getting one of these. In celebration: Thats the version I'm doing with CA36K and is the barrel made out of metal?Now Classic ARMY just needs to release a Dual Optics carry handle. Link to post Share on other sites
Jagdraben Posted May 11, 2006 Report Share Posted May 11, 2006 Great. Now I'll have to figure out how to disassemble that thing so I can spray (most) of it OD. (Might be worth going for in lieu of the L86A2... just use the AG36 as a back-up for when the CA36 goes click in CQC....) Link to post Share on other sites
brian222 Posted May 11, 2006 Report Share Posted May 11, 2006 Sick. Just another reason to spend more money on this so called hobby/sport of airsoft. Link to post Share on other sites
demon.b Posted May 11, 2006 Report Share Posted May 11, 2006 Sick. Just another reason to spend more money on this so called hobby/sport of airsoft. <{POST_SNAPBACK}> All your money am belong to airsoft Link to post Share on other sites
umbra Posted May 11, 2006 Report Share Posted May 11, 2006 Damn! Yet more H&K for me to spend money on . Still, nice to know that there is a reasonably cheap AG36 out there. Link to post Share on other sites
Glenn Posted May 11, 2006 Report Share Posted May 11, 2006 I might have one of those in the next two or three weeks. I just hope it's not a direct copy of the Star. I want a normal size handguard! Looks too spec to me, but we'll see when someone gets their hands on one. Link to post Share on other sites
sadigh Posted May 11, 2006 Report Share Posted May 11, 2006 Yes! Another thing to mod so it will fit on my l85 Link to post Share on other sites
rokentsu Posted May 11, 2006 Report Share Posted May 11, 2006 forget a gbb, this is what im saving up for..now to find it on a US retailer so i dont have to pay the ridiculous shipping fee Link to post Share on other sites
staticzero Posted May 11, 2006 Report Share Posted May 11, 2006 I might have one of those in the next two or three weeks. I just hope it's not a direct copy of the Star. I want a normal size handguard! Looks too spec to me, but we'll see when someone gets their hands on one. <{POST_SNAPBACK}> Yeah I'm a bit concerned about this too. forget a gbb, this is what im saving up for..now to find it on a US retailer so i dont have to pay the ridiculous shipping fee <{POST_SNAPBACK}> If it's anything like the CA M203s and it does have a metal barrel don't count on it. From what I've seen CA had to import their M203s with plastic barrels and sell the metal barrels separately. This is the way it was at AEX anyway. You won't save money vs. getting it from HK if it works out like that. $200 for the launcher and another $70 for the barrel? No thanks. I'd rather pay $160 plus the $40 or so that it'll cost to ship it (and a few other things at the same time even). Link to post Share on other sites
mobius9 Posted May 12, 2006 Report Share Posted May 12, 2006 really? I'll have to check again tomorrow. I almost genuinely remember them being metal. If its plastic it's a damn good immitation either way. Link to post Share on other sites
Crispin1025 Posted May 12, 2006 Report Share Posted May 12, 2006 Fricken finally. It's probably just a copy of the Star version but it's not $400 so yay! It looks like it's missing all the markings but the handguard plastic is bound to look as good as CA's usually does and the metal stuff all looks pretty sharp. I'm looking forward to getting one of these. In celebration: <{POST_SNAPBACK}> I was thinking about getting the VFC AKSU, then this... Does anyone know where I can purchase the rail in these pictures? Thanks. Cheers! Crispin1025 Link to post Share on other sites
staticzero Posted May 12, 2006 Report Share Posted May 12, 2006 What, the KSK style aluminum railed carry handle? Your only choice is to get a real one. You can find them on SL-8.de for a bit over $200 if you really, really, really want one. Oh and don't forget to get some MP7 BUIS to seal the deal, if you can. Me, I only really really want one, and at that price I think I'll just keep hoping someone makes a copy soon. Yay G36C railed carry handle with iron sights in the mean time. Link to post Share on other sites
rokentsu Posted May 12, 2006 Report Share Posted May 12, 2006 i guess one possible way to do it is to remove the iron sights off of the G36C carry handle and cut off some of the side covers. however, it wont be as high as the KSK rail. however, its something i would never want to do. Link to post Share on other sites
n00bTard Posted May 12, 2006 Report Share Posted May 12, 2006 Wow, that is great news. I already have the STAR one, and I couldn't be happier with it. I consider it worth every penny - but I'd love to see how this one compares. I have several G36s... and I might consider having another AG36 variation if this is really worth the money. I would love to get that high KSK rail too. The closest I've seen is the STAR SL9 rail that is one solid piece with no sights. Also, nitro.vo sells a 'flat top' kit that can fill in the holes from removing the iron sights from a C rail giving it that smooth flat look too - though its rediculously overpriced. These are just hacks though, since it won't be as high and still have the side panels to chop off. Now that CA is making RAS kits, AG36 kits, and soon an SL8-2 or whatever, can a dual optics scope and more top rails be far behind? I hope not - I can't get enough G36... Link to post Share on other sites
DarkLite Posted May 12, 2006 Report Share Posted May 12, 2006 Looky what I found in Mong Kok today: Notice also the "c" sized RIS foregrip. Link to post Share on other sites
Glenn Posted May 12, 2006 Report Share Posted May 12, 2006 Thanks for that picture! Looks great. I need to get one of those, asap. And the C length RIS sounds cool, closest thing to the B&T yet. Link to post Share on other sites
Rec Posted May 12, 2006 Report Share Posted May 12, 2006 Has this been announced at all...? Link to post Share on other sites
Glenn Posted May 12, 2006 Report Share Posted May 12, 2006 Two, maybe three months ago. Search the news forum, it's in there. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.