Mike_West

Something for the ladies? Next you will be keeping Drambuie in the house

What the hell is a Drambuie?

That and I'm partial to Southern Comfort anyway.

Have a look, it is a joke from a Brit 'comedy' called Bottom, it is just random *suitcase*

But I had to borrow that hat. I don't wear hats everyday.

Next time demand the hat as part payment

I could buy one for 12 quid, but since I don't wear them anyway, I considered it an unnecessary expense.

Yeah, just finished putting it together.

Good. Ready to see it.

Check my gallery.

Still running an i7-950, 6GB RAM and 2x ATI 5870's - too poor to upgrade.

bladerunner, I think you are confusing being poor with spending all your money on sweet airsoft guns ha ha.

Doc, that's pretty much the config I'm aiming at. Just with a different video card.

Bladerunner - oh, certainly you can put two more gigabytes of RAM in that thing.

Wanted to buy a G&G WA2000. Then I heard " Plastic simulated wood "

I am dissapoint.

Oh ... I missed that bit .. now I am disappoint too.

Well, some guys from a local website were at IWA and talked to the G&G rep. Apparently after the spring version, there's supposed to be a woodkit and a CO2 version. Or so they said.

i think i know where this is going and ive had a the same urge with my l96 stock

I hope that's not in the way fireknife is thinking

Well, pretty much I need a futuristic stock and a high-velocity semi-automatic mechanism. I want to build something like the sniper rifle from Deus Ex Human Revolution.

Do it.

Not really much to do, I'll just put an AK74 flashhider and an AK47 magazine on it, mod that foregrip to actually allow aiming and make the stock out of copper tubing.

I think this is a good idea and agree unconditionally

Yes, PRS. Haven't noticed the typo.

What would you use as the base? I'd love to put some mid-length MOEs on an SR-25, but if i went with the G&P it'd feel like an awful waste taking off the stock rail system (and probably barrel).

I thought about the JG SR25, it has a G27 pistol grip in stock. I think that you could still use the stock barrel, you'd just need a delta ring, a gas block and a short MOE rail to put the bipod on.

10/22?

Yup. It's stuck in customs right now, but the barrel slipped through and I hope the stock will too.

Goddamn hell*fruitcage*. Stock ended up inspected by customs. 60 quid up the *albatross* in total. I could have a scope for that.

New barrel assembly that allows you to install a hop-up. I thought of a CNC chamber with a forcing cone, VSR hop-up and TM pistol barrel, and a new outer barrel similar to the revolver from Blacklight: Retribution.

want!!! what would you need to do it?

http://1.bp.blogspot.com/_J0eGLzEI-8A/TDekh1wIUnI/AAAAAAAAAYw/ps9auGeI6DE/s1600/Revolver.jpg - this is the revolver from Blacklight. I would need some expertise with CAD to design the hop-up chamber and new outer barrel (move the spring from the front of the barrel to the end of the hop-up chamber and brace it inside the outer barrel). And I would need lots of money for that (you know, third-word Assholistan in Middle-Eastern Europe, boring underpaid deskjockey job, etc.).

AFAIK the Denix models are non firing replicas, not even pfc's so making it to fire bbs shouldn't be illegal.

I'm with RC on this one. It's not a deactivated firearm so modifying it to fire BBs shouldn't be legally problematic.

Well, it's because a Denix sawn-off goes for just under eighty quid over here, as compared to over $250 (and shipping from HK) for a Wa Shan one. All I need to do is drilling through the faux firing pins to make them work and adjusting hammer springs so they don't *fruitcage* up the Goblin shells (which, IIRC, need just a gentle push).

*smacks Mike upside the head*

"Throws Mike into nearby duty car to be taken for 'Reeducation' "

Oh. Someone already thought of this kind of solution:

http://www.thefirearmblog.com/blog/2010/06/11/fab-defense-kpos-review/

HERA kit just asks for a folding stock, it looks boring with solid one.

I believe it's the usual daily routine. But some stores only ship certain days in the week to save on expenses.

Well, actually the shop sent it on Monday and it took the post office a whole week to finally sort it and put it on a plane.

I'm shocked and surprised that stuff Ebairsoft posted arrived at my door 4 days later!

Think it might have vanished along during the crackdown.

This makes me a sad panda.

Three words for you.

 

HAN, SOLO, BLASTER.

 

http://seriously-mike.tumblr.com/post/39919820023/hue-hue-hue-i-found-this-baby-by-accident-and-i - PASAM. Hue hue hue.

Cheers. I'm going on day 14 of USPS shipping my AK a mere 200 miles.

USPS actually did their job in this case, in three days the gun was delivered across the Atlantic. Then it got stuck in customs for almost exactly ten days (without forty minutes according to the tracking log). I hope I'll be able to pick it up tomorrow.

10/22, the KJW rifle itself is a great piece of airsoft weaponry.

As long as the mag seals don't blow, that is.

So, another ?150 and I'm building this *badgeress*. Hope Ehobbyasia doesn't screw me over on shipping costs.

Wouldn't that create a huge step between the outer barrels?

 

Not sure, I think that extension is an inch in diameter or so, but there's no concrete info about it anywhere.

WinGun revolver Mike? If so which make and once you get it could you give me a nod on whether it is good?

Sorry pal, it's Section 5. That thing can put out over 500 fps, although I'll have to borrow a chrono to get exact figures.

That ain't too bad, depends on the quality though too.

Wooden body, painted OD, fuses taken from training models (still painted blue). Probably due to some dumb-*albatross* local regulation I don't know.

I think you'd need the biggest hands in the world in order to actually be able to reach the trigger. That aside...

 

omg so damn keeeewl

Well, I kinda suspect that the grip would have to be changed, but I made a little experiment - the picture uses parts of a M79 photo matched 1-to-1 by barrel size. I think I would be able to hold it as is.

Is it your dream build as in you fantasized about owning it since the day you started Airsoft?

No, but I was thinking about it since November or so. Well, the worst that can happen is Muzzelite stock having *suitcasey* trigger pull, and in that case I start looking for a second-hand Well MB05 stock.

For what gun?

It was an universal jobbie fitting the standard -14mm thread.

get one in pink!

Nah, I can't afford the silver barrel, and it would look better with a pink stock. I'll probably end up with a broken MB05 and a dremel.

870. I just got one, and it's more fun than i can say with words.