my_plague_666 Posted October 7, 2008 Report Share Posted October 7, 2008 http://www.dynamicstar.com.tw/product_show.php?id=344 Link to post Share on other sites
mightyjebus Posted October 7, 2008 Report Share Posted October 7, 2008 it looks like part RMW/Inokatsu and part TM/Clone AK47. the wood is Inokatsu as is the fire selector, the receiver looks like a RMW TM compatable receiver and the easy way to check is to remove the magazine and look inside the receiver. if there is two screws then its the compatable receiver. Top cover could be anything and the flash hider is from the Inokatsu wood kit. rear sight block is TM/Clone as it the front sight. The gas tube is TM/clone as well. fake bolt is RMW/Inokatsu as is the pistol grip. The front lower handguard retainer is a plastic TM/Clone one as well. Looking more closely it looks like the TM/Clone parts are actually clone parts as the black paint used is different to a TM AK47. you can notice how dark it is on the rear sight and gas tube release lever. this isn't 100% but if you check the hop and it's white with black screws in it the doner clone AK was a CYMA. you didn't buy a Inokatsu mate it looks like someone lied to you. Just had a quick check of your photos and the top cover is RMW/Inokatsu Link to post Share on other sites
Jin15 Posted October 7, 2008 Report Share Posted October 7, 2008 Gah! The OEM for Inokatsu/Guarder/RMW! If it wasn't in violation of the scale of norms I'd kiss you! Spasiba comrade! Link to post Share on other sites
ComradeMP1 Posted October 7, 2008 Report Share Posted October 7, 2008 (edited) Yeah, that receiver is clearly an Inokatsu TM steel kit and furniture with the TM/Clone plastic rear front end/pot metal bits. I would recommend that you simply slap a G&P metal front end, I really recommend that you also get yourself a G&P alumni barrel, handles screws better than the crappy pot metal barrel and is thicker too, so more threading for your screws. If you feel it necessary, look up some nice 1000m rear sight and the AKM gas tube, lower hand guard retainer, gas block, gas tube, front sight, slant muzzle brake for complete win. As mentioned you should easily be able to source these parts from Ting at RMW or buy some RS bits and custom install it yourself. I'm sure it's a Inokatsu TM steel kit, I had one too. Here's the kit on my TM along with the alumni barrel (Deep Fire), and G&P metal front end. (Excuse the rail, this was years ago before I started thinking purely progressive thoughts) If you want, I can provide you with more pictures of those parts for reference. Edited October 7, 2008 by ComradeMP1 Link to post Share on other sites
ancorp Posted October 7, 2008 Report Share Posted October 7, 2008 I'm pretty sure LCT is the OEM. http://www.lctairsoft.com/ Link to post Share on other sites
afallan Posted October 7, 2008 Report Share Posted October 7, 2008 First AK i have ever owned(airsoft that is) Inokatsu AKM(well kinda still dont know why its missing some things) I knew I've seen that AK before. Let me guess you live in California or you bought it from someone from California. Airsoftextreme.com was selling those guns in the past. They are indeed Inokatsu Marui conversion kits. So the rest of the parts are from Marui AK's. The guy you bought it from isn't lying that it is an Inokatsu, just not all the parts are. http://www.airsoftextreme.com/store/index....p;cPath=364_524 By the way, they come with the correct flash hiders when you order them, the orange is just a plastic flash hider for legal purposes. afallan Link to post Share on other sites
Ginger_Biscuit Posted October 7, 2008 Report Share Posted October 7, 2008 My problem is that the sling hook doesn't fit through my sling loop. At first I cursed cyma for making the sling loop too small, but its the same on my Ino, and I don't think that is a coincidence. Trying to fit in on a akm and a aims by the way. Is the problem that you cannot get the hook through this? http://i307.photobucket.com/albums/nn315/G...ng/DSC01195.jpg If this is the case you have to pull the hook through at an angle like this: http://i307.photobucket.com/albums/nn315/G...ng/DSC01193.jpg and then it should go through with no problems like this: http://i307.photobucket.com/albums/nn315/G...ng/DSC01194.jpg The rest of these pics might be of use too (I took them in a hurry to illustrate what to do so forgive the crappy quality) http://s307.photobucket.com/albums/nn315/G...ver/ak%20sling/ Hope that solves your problem! Biscuit Link to post Share on other sites
Billy Bob the Sniper Posted October 7, 2008 Report Share Posted October 7, 2008 Yeah i only paid 200 for it... I am planing on putting Real steal parts on it. We are strait on our purchase... i was just expecting something different. Link to post Share on other sites
PlasticMag Posted October 7, 2008 Report Share Posted October 7, 2008 You only paid $200? That's a good price for what you got, not sure what else you were expecting for $200! Link to post Share on other sites
Billy Bob the Sniper Posted October 7, 2008 Report Share Posted October 7, 2008 (edited) haha yeah... i have weathered it.... pics in a few... just need to re do the whole front end of the gun(crappy finish) i am gona replace it all. Wheres a good site to get real steal parts? EDIT: Heres a pic of the weathering.. the front end ruins it.... I am gona order a G&P one shortly. Edited October 7, 2008 by Billy Bob the Sniper Link to post Share on other sites
my_plague_666 Posted October 7, 2008 Report Share Posted October 7, 2008 I'm pretty sure LCT is the OEM. http://www.lctairsoft.com/ dah. but they dont sell directly, DS do damn good prices. Link to post Share on other sites
The Crunchy Bunny Posted October 7, 2008 Report Share Posted October 7, 2008 KVAR's a good shop for AK parts. In addition to the G&P Frontset, get a AKM front sight (you currently have the thicker, AK47 type), and an AKM Gas Block (again, AK47 type, you can tell by the series of vent holes, rather then one, semicircular cutout). Link to post Share on other sites
Billy Bob the Sniper Posted October 7, 2008 Report Share Posted October 7, 2008 heres another pic of the gun: And i have no clue where to get AK stuff so if yall could point me in the right direction that would be awesome. Link to post Share on other sites
Jin15 Posted October 7, 2008 Report Share Posted October 7, 2008 dah. but they dont sell directly, DS do damn good prices. I set up an account with DS and tried placing an order for the AK-47 wood kit you pointed me to but their ordering system seems a little odd and I'm not sure how it works. Is it just like with shops like UNCompany or DEN where you place an order and then wait to hear back in email form with the full quote including shipping cost and payment instructions? There was nothing on their website that gave clear ordering/payment instructions as far as I could tell Link to post Share on other sites
dookieboy Posted October 7, 2008 Report Share Posted October 7, 2008 www.theakforum.net ^^^epic for parts. Link to post Share on other sites
ComradeMP1 Posted October 8, 2008 Report Share Posted October 8, 2008 (edited) Hell yeah, AKF: http://www.theakforum.net/phpBB2/viewforum...c03c8c442b783f0 I think this would do nicely: https://www.apexgunparts.com/product_info.p...d63dslnlk09u3h7 you could use the detent and spring from the TM FSB me thinks. You'll just have to really hammer out the pins from the gas block. I'd also cut up the threaing from the TM FSB and find a way to instert it onto the AKM FSB. Then the lower hand guard retainer: https://www.apexgunparts.com/product_info.p...d63dslnlk09u3h7 You could also go a head and use a correct AKM style gas tube, I've got two spares if your interested. I'm pretty sure you can do some custom work and get a rear sight block to fit on there too. Edited October 8, 2008 by ComradeMP1 Link to post Share on other sites
boomboomairsoft Posted October 8, 2008 Report Share Posted October 8, 2008 (edited) http://www.adxtactical.com/store/pc/viewCa...sp?idCategory=2 http://www.cctactical.com/ http://www.rcmgunparts.com/ http://www.tapco.com/ http://www.k-var.com/shop/ http://www.parts4ak47.com/ http://www.veriforcetactical.com/ http://dpharms.com/ http://www.ultimak.com/ <- best mount for red dots http://www.akparts.com/index.htm?c49.htm&1 http://www.mountsplus.com/miva/merchant.mv...-47-Accessories http://www.gunaccessories.com/ http://www.uberarms.com/akaccessories.html http://www.riflegear.com/ http://www.buymilsurp.com/zencart/index.ph...ex&cPath=28 http://www.midwayusa.com/static/AK-47.aspx http://www.blackjackbuffers.com/ http://www.rbprecision.com/list_of_our_products__.htm take your pick BTW, dookie do you own a real ak? for private forums sales www.calguns.net http://www.thehighroad.org/ http://www.thefiringline.com/ http://www.akfiles.com/ Edited October 8, 2008 by boomboomairsoft Link to post Share on other sites
dookieboy Posted October 8, 2008 Report Share Posted October 8, 2008 No, why did you think mine was a real polish build built on a Nodak spud reciever? :3 Link to post Share on other sites
boomboomairsoft Posted October 8, 2008 Report Share Posted October 8, 2008 was just wondering if you were a kali ak owner...or plan on being one? Link to post Share on other sites
ComradeMP1 Posted October 8, 2008 Report Share Posted October 8, 2008 (edited) Trust me we are going to be one day. I already have much of the parts to build my own And have to deal with the whole CA "evil features" BS and what not. Edited October 8, 2008 by ComradeMP1 Link to post Share on other sites
dookieboy Posted October 8, 2008 Report Share Posted October 8, 2008 Me and Comrade soon enough will be PROUD Kali AK owners Link to post Share on other sites
iilari Posted October 8, 2008 Report Share Posted October 8, 2008 Kalash Aks74u. I like it alot even if handguards are plastic and i allready broke my stock. I modded handguards abit as you can see from the pic. I did those cooling holes (or what ever they are) and give them some gentle touch Stock broke from that little sear that holds the stock when folded, but i fixed it with aluminium plate and screw. Now it is better than new, no wobble. Link to post Share on other sites
boomboomairsoft Posted October 8, 2008 Report Share Posted October 8, 2008 Trust me we are going to be one day. I already have much of the parts to build my own And have to deal with the whole CA "evil features" BS and what not. Me and Comrade soon enough will be PROUD Kali AK owners http://calguns.net/ join here, will teach you everything you need to know and more. Good Luck, Happy Hunting Link to post Share on other sites
Mattdk Posted October 8, 2008 Report Share Posted October 8, 2008 {pic} Kalash Aks74u. I like it alot even if handguards are plastic and i allready broke my stock. I modded handguards abit as you can see from the pic. I did those cooling holes (or what ever they are) and give them some gentle touch Stock broke from that little sear that holds the stock when folded, but i fixed it with aluminium plate and screw. Now it is better than new, no wobble. I do like the modded to the handguards. Link to post Share on other sites
christavel! Posted October 8, 2008 Report Share Posted October 8, 2008 argh guys im having trouble with my realsword. I've tried TM mags and they won't fit and i dont have enough money or time to import RS mags from HK. Anyone know what to do? Sanding etc Link to post Share on other sites
Recommended Posts