Shardik Posted May 17, 2009 Report Share Posted May 17, 2009 I just got this, and was eager to take some pics, so please excuse it's naked-ness. http://i303.photobucket.com/albums/nn139/b...se/DSCN0653.jpg http://i303.photobucket.com/albums/nn139/b...se/DSCN0654.jpg i Like this, i dont see what else it needs. Please don't quote pictures Quote Link to post Share on other sites
TheSadR Posted May 18, 2009 Report Share Posted May 18, 2009 CIRAS - OD Cheers Quote Link to post Share on other sites
flatout Posted May 19, 2009 Report Share Posted May 19, 2009 my warrior ricas with condor and flyye pouch and flyye map back pack just need a radio pouch Quote Link to post Share on other sites
Gentner91 Posted May 21, 2009 Report Share Posted May 21, 2009 Still a work in progress, but here is my Eagle Industries RRV. EI RRV: ESAPI 7.62 APM2 Plates: (Brand New, Never Fielded) Kitlist: Eagle Industries RRV Eagle Industries RLCS M4 Shingle Eagle Industries RLCS Admin Eagle Industries M4 Single Mag Pouch Eagle Industries Canteen Pouch Eagle Industries Medical Pouch x2 ESAPI 7.62 APM2 Plates (Man. Date 08/2008) MSM Infidel Patch MSM Pirate Flag Patch x3 Green Chem Sticks (In Canteen Pouch) Still Need Eagle Industries Rear Backpannel Eagle Industries Single Mag Pouch Eagle Industries Frag Pouch Eagle Industries Hydro Carrier Quote Link to post Share on other sites
Lizzard Posted May 23, 2009 Report Share Posted May 23, 2009 (edited) New love: Anyone got a triple MP5 mag pouch they want to sell me? Edited May 23, 2009 by Lizzard Quote Link to post Share on other sites
Agent Hunk Posted June 2, 2009 Report Share Posted June 2, 2009 Anyone have any pictures of the Eagle CRCH Enhanced version with the built in mag pouches? Trying to get an idea for how bulky it is, or isn't. Quote Link to post Share on other sites
echodafish Posted June 2, 2009 Report Share Posted June 2, 2009 They are very low profile. The cops in the desert wore them and I have almost wanted one ever since then. Quote Link to post Share on other sites
tom lawson Posted June 4, 2009 Report Share Posted June 4, 2009 My BHI Plate Carrier: Kit list: 2x DPM Double M4 Pouches, made by an American gear maker by the name of Diz 2x DPM M4 Shingles made by OnPatrol 1x DDPM Pistol Mag Pouch made by Bozzer 1x IMI P226 Holster (Basically a copy of a SERPA, but dead cheap) 1x BHI Pistol Lanyard 1x CAT 1x BHI Hydro Pouch Its fairly easy to get the mag out of the rear shingle, if you were wondering. And the dark patch on the back is water, honest. Quote Link to post Share on other sites
skyflash Posted June 5, 2009 Report Share Posted June 5, 2009 Paraclete HPC Quote Link to post Share on other sites
Unit 318 Posted June 5, 2009 Report Share Posted June 5, 2009 It's so cute and tiny :3 Quote Link to post Share on other sites
rws591 Posted June 5, 2009 Report Share Posted June 5, 2009 Yah seriously, I had to take a double take. It looks so small. Quote Link to post Share on other sites
Lizzard Posted June 5, 2009 Report Share Posted June 5, 2009 (edited) Anyone have any pictures of the Eagle CRCH Enhanced version with the built in mag pouches? Trying to get an idea for how bulky it is, or isn't. Aren't those made by BHI, not Eagle? My BHI Plate Carrier: Kit list: 2x DPM Double M4 Pouches, made by an American gear maker by the name of Diz 2x DPM M4 Shingles made by OnPatrol 1x DDPM Pistol Mag Pouch made by Bozzer 1x IMI P226 Holster (Basically a copy of a SERPA, but dead cheap) 1x BHI Pistol Lanyard 1x CAT 1x BHI Hydro Pouch Its fairly easy to get the mag out of the rear shingle, if you were wondering. And the dark patch on the back is water, honest. Does that lanyard get in the way at all? It looks like it would, I'd rather have it on my right side, especially once you've drawn the pistol. Also, you have your sidearm set up for a right-handed person, but the mags are set up lefty style, why's that? Paraclete HPC Epic rig and epic picture. Well done. Edited June 5, 2009 by Lizzard Quote Link to post Share on other sites
Agent Hunk Posted June 6, 2009 Report Share Posted June 6, 2009 ..Yes... Quote Link to post Share on other sites
Spekter Posted June 6, 2009 Report Share Posted June 6, 2009 I need help, guys. I am only 5'6", and I am super scrawny. I've been looking for a new plate carrier for ages, but everything seems so huge on me. I liked the way my old Limited Edition Blackwater pc fit, but I hated the shoulder-mounted release buckles, so I got rid of it. Any suggestions on smaller rigs? thanks Quote Link to post Share on other sites
Lizzard Posted June 6, 2009 Report Share Posted June 6, 2009 Have you tried any plate carriers with plates in them and/or a soft armor carrier underneath? Quote Link to post Share on other sites
Jolly15 Posted June 6, 2009 Report Share Posted June 6, 2009 Skyflash: do you have a C bun? or are you running pouches on the strap? Quote Link to post Share on other sites
skyflash Posted June 6, 2009 Report Share Posted June 6, 2009 No cummerbund, the pouches on the sides are on the last MOLLE. Well in fact the left pouch is on the same MOLLE than the radio pouch... (yes, it's f**'n tight) Sometimes I put pockets on the lateral straps but I prefer to let them empty. Quote Link to post Share on other sites
tom lawson Posted June 6, 2009 Report Share Posted June 6, 2009 Does that lanyard get in the way at all? It looks like it would, I'd rather have it on my right side, especially once you've drawn the pistol. Also, you have your sidearm set up for a right-handed person, but the mags are set up lefty style, why's that? Its not that bad, but I think I'll replace it with one I can attach to the MOLLE loops themselves. My mags weren't lefty style, as far as I was aware, but I've swapped them all around now. Thanks for the input. Quote Link to post Share on other sites
rws591 Posted June 6, 2009 Report Share Posted June 6, 2009 I need help, guys. I am only 5'6", and I am super scrawny. I've been looking for a new plate carrier for ages, but everything seems so huge on me. I liked the way my old Limited Edition Blackwater pc fit, but I hated the shoulder-mounted release buckles, so I got rid of it. Any suggestions on smaller rigs? thanks Do you need a C-bun? If not go with a FAPC, mine fit me perfectly. I am 5'8 and I had a medium. I think a small would fit you just right. Personally I didn't need a C-bun with it. I got by with an Admin, Triple M4 Pouch, and "Accessory Platform Zipper" on the front. And on the back I had their MAP with M4/45 pouches on the sides for pistol mags and speed re-loaders and a shingle and small radio pouch. Here are some links, the second is a must for any FAPC as it can transform the button flap into either an easyily exesable zippered pouch or a magpouch for most types of guns. http://www.diamondbacktactical.com/Fast-At...2-P3007C85.aspx http://www.diamondbacktactical.com/Accesso...-P2911C229.aspx DBT makes some great kit and has great customer service as well. Quote Link to post Share on other sites
Lizzard Posted June 6, 2009 Report Share Posted June 6, 2009 Its not that bad, but I think I'll replace it with one I can attach to the MOLLE loops themselves. My mags weren't lefty style, as far as I was aware, but I've swapped them all around now. Thanks for the input. I suppose that would depend on how you grab your mags. If you grab them by the base, for example, then they would be backwards. If you grab them by the body, not necessarily. Quote Link to post Share on other sites
tom lawson Posted June 6, 2009 Report Share Posted June 6, 2009 I suppose that would depend on how you grab your mags. If you grab them by the base, for example, then they would be backwards. If you grab them by the body, not necessarily. I just have them placed in a way that enables the quickest reload when I have to. Quote Link to post Share on other sites
dliberty Posted June 7, 2009 Report Share Posted June 7, 2009 pic from last weekend still a wip, needs 2 or 3 more things that are on their way to me now then ill take a pic of it all layed out, post the kitlist and all that jaz. Quote Link to post Share on other sites
waynejordan02 Posted June 8, 2009 Report Share Posted June 8, 2009 couple of pics of my new plate carrier. Quote Link to post Share on other sites
dliberty Posted June 8, 2009 Report Share Posted June 8, 2009 what grenades are those? Quote Link to post Share on other sites
waynejordan02 Posted June 10, 2009 Report Share Posted June 10, 2009 what grenades are those? they aremade by sniker and its ther MK2 gas grenades cant say they are very good they release far to quick you dont even have time to throw it and its gone off but they look the part Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.