Zatarra Posted September 15, 2009 Report Share Posted September 15, 2009 Having tried a wide panel of AK's : - Marui - VFC - Ino / LCT - Real Sword - Kalash - Cyma - Jing Gong ...it is still the Ino / LCT that I love the best : rock solid construction,, very very nice finish and on the top of all of this : "Lego" AK concept ! You can almost build your very own AK, or change your AK to another one by replacing some parts. Having now hell of a LCT parts in stock, it's very fun to build exotic AK's. Beside Ino, I love the Kalash AKSU, almost nothing to throw away with this little babe : change the spring, replace hop rubber and bucking by TM parts and your good to go ! I've just refinished the wood handguard (because out of the box it doesn't give the AKSU justice), and replaced the grip by a LCT one. I thought the general concenus was that the Real Sword was the best AK you can get. Link to post Share on other sites
apmaman Posted September 15, 2009 Report Share Posted September 15, 2009 My ICS AKS74U didn't come with a scope mount bracket much to my dismay and I was wondering where I would go about to get one? I'd like to have a Kobra red dot stuck on eventually but just now its impossible. Link to post Share on other sites
my_plague_666 Posted September 15, 2009 Report Share Posted September 15, 2009 I thought the general concenus was that the Real Sword was the best AK you can get. if you want a type 56 then yes. otherwise VFC or LCT are the way to go. Link to post Share on other sites
mightyjebus Posted September 16, 2009 Report Share Posted September 16, 2009 G&G, KALASH and RMW AKMS but which one is which? Link to post Share on other sites
j3T Posted September 16, 2009 Report Share Posted September 16, 2009 (edited) G&G, KALASH and RMW AKMS but which one is which? Top RMW, middle Kalash and bottom one G&G? Although I suppose the G&G and RMW are hard to tell apart since they come from the same factory. Edited September 16, 2009 by j3T Link to post Share on other sites
azsworst Posted September 17, 2009 Report Share Posted September 17, 2009 Bottom pic, you pretty much just told us. That and the pistol grips are a dead giveaway. Link to post Share on other sites
ST19AG_WGreymon Posted September 18, 2009 Report Share Posted September 18, 2009 Did you guys replace any of your DBoy AK receiver covers yet? Mine was so short it would just come off if you lifted up on it. So I replaced it with an ICS receiver cover. It has a much nicer finish on it than the DBoys and is a bit thicker and is perfectly cut, the original one had bends in it. It fits alot nicer too. Link to post Share on other sites
joeshred Posted September 18, 2009 Report Share Posted September 18, 2009 quick question, are g&g pbs suppressors faithful reproduction of the real thibg? thanks Link to post Share on other sites
Geri Posted September 19, 2009 Report Share Posted September 19, 2009 I just finished the first of my new mags... Link to post Share on other sites
08kecarv Posted September 19, 2009 Report Share Posted September 19, 2009 VERY nice 63!!!! How hard was it to make those mags? IM surprised theres no 65 love in here Link to post Share on other sites
{{RommelsElite}}Pz4 Posted September 19, 2009 Report Share Posted September 19, 2009 That looks excellent Geri Link to post Share on other sites
Geri Posted September 20, 2009 Report Share Posted September 20, 2009 I saw here minimum one 65 earlyer... It was not hard... Just some hours of work with a dremel. Link to post Share on other sites
James Kelly Posted September 20, 2009 Report Share Posted September 20, 2009 I'd like to pose a quick question to the user base here. Are STAR lowcaps compatible with VFC AK's, specifically the AIMS? I'd like to pick up a set of basic lowcaps, but I've heard that there may be some feeding issues with that pairing. If so, what sort of mids/lows would be recommended for VFC guns? Link to post Share on other sites
Kuutti Posted September 20, 2009 Report Share Posted September 20, 2009 The G&G PBS looks accurate to me, if you're only talking about the PBS-1. I wish they would come out with a PBS-5 to put on an AKS74U... Link to post Share on other sites
Whudafxup Posted September 20, 2009 Report Share Posted September 20, 2009 I'd like to pose a quick question to the user base here. Are STAR lowcaps compatible with VFC AK's, specifically the AIMS? I'd like to pick up a set of basic lowcaps, but I've heard that there may be some feeding issues with that pairing. If so, what sort of mids/lows would be recommended for VFC guns? MAG midcaps feed flawlessly in my VFC AIMS. Definitely go with a set of MAG mids. Link to post Share on other sites
my_plague_666 Posted September 20, 2009 Report Share Posted September 20, 2009 seconded mag. plus with some red and orange ink, amber and red varnish and bit of creativity you can get them looking VERY close to real bakelite. i once even had someone ask me how much my "real steel" 45 rounders set me back. the bloke was quite shocked when i said they were painted MAG Link to post Share on other sites
j3T Posted September 20, 2009 Report Share Posted September 20, 2009 seconded mag. plus with some red and orange ink, amber and red varnish and bit of creativity you can get them looking VERY close to real bakelite. i once even had someone ask me how much my "real steel" 45 rounders set me back. the bloke was quite shocked when i said they were painted MAG I'm curious now, do you happen to have a picture of these painted mags? As it's a picture thread; my gen1 VFC AKSU. The gearbox will soon be replaced with GBB internals. Link to post Share on other sites
Puding Posted September 20, 2009 Report Share Posted September 20, 2009 some new toys cyma akm and dobys akms quick family shot as i tided up today ak74m a&k svd and rpk missing Link to post Share on other sites
Puding Posted September 20, 2009 Report Share Posted September 20, 2009 Link to post Share on other sites
babybackribs Posted September 21, 2009 Report Share Posted September 21, 2009 I'm curious now, do you happen to have a picture of these painted mags? As it's a picture thread; my gen1 VFC AKSU. The gearbox will soon be replaced with GBB internals. *snip* That sight seems a little small for that big of a gun. Link to post Share on other sites
Lajjvo Posted September 21, 2009 Report Share Posted September 21, 2009 New piccy. Just got me a PBS-1. Dunno what brand, but it's a 900 gr lump of steal Now all i need is a PSO/POSP Link to post Share on other sites
Robinio Posted September 21, 2009 Report Share Posted September 21, 2009 some new toys cyma akm and dobys akms http://i46.photobucket.com/albums/f128/iri...SC_58050001.jpg http://i46.photobucket.com/albums/f128/iri...SC_58120001.jpg http://i46.photobucket.com/albums/f128/iri...SC_58080001.jpg http://i46.photobucket.com/albums/f128/iri...SC_58140001.jpg http://i46.photobucket.com/albums/f128/iri...SC_58510001.jpg http://i46.photobucket.com/albums/f128/iri...SC_58550001.jpg http://i46.photobucket.com/albums/f128/iri...SC_58630001.jpg quick family shot as i tided up today ak74m a&k svd and rpk missing http://i46.photobucket.com/albums/f128/iri...SC_58730001.jpg Which one is better externally, the CYMA or the Dboys? So damn horny on you gun Lajjvo. Link to post Share on other sites
my_plague_666 Posted September 21, 2009 Report Share Posted September 21, 2009 (edited) I'm curious now, do you happen to have a picture of these painted mags? not in their final state, no. i sold them on to a friend a while ago too (i'm taking a break from airsoft) edit: of course they were no substitute for the real deal. they still felt rather cheap. Edited September 21, 2009 by my_plague_666 Link to post Share on other sites
frogfish Posted September 21, 2009 Report Share Posted September 21, 2009 GHK AK-74M DTG innards LCT AIMS front grip LCT vented steel heat shield ICS 74 dust cover ACM D-boys Romanian stock Link to post Share on other sites
Robinio Posted September 22, 2009 Report Share Posted September 22, 2009 @Lajjvo, Probably Classic army silencer, My QD M15 Silencer is also 1 kg hump of steel. Link to post Share on other sites
Recommended Posts