Luis21 Posted June 15, 2009 Report Share Posted June 15, 2009 The RIS version is available now in local walk-in shops here in Hong Kong. Today, all are already sold out, but some will re-stock tomorrow and guess what I'll sure buy one. The RIS version also has a full length gas tube right? I'm going to get mine this week too. Thanks, -Luis Link to post Share on other sites
davedawg123 Posted June 15, 2009 Report Share Posted June 15, 2009 I thought none had proper gas tubes if at all? Link to post Share on other sites
Crimson Posted June 15, 2009 Report Share Posted June 15, 2009 Thanks for pauls e mail addy E mailed paul will wait for his reply Link to post Share on other sites
Badly Browned Posted June 15, 2009 Report Share Posted June 15, 2009 I didn't order mine from Ehobby, but for just the rifle it was something like $120 + $76 for shipping. When I bought my A&K M249 from them a while ago, I paid $40 for S/H. And they used DHL which is slow as hell in my area. As for Ebaybanned, always try to get in contact with Paul. In fact, I just got a reply from Paul on an email I sent just a couple hours ago. Also, where is everyone getting the RATech parts from? Link to post Share on other sites
Luis21 Posted June 15, 2009 Report Share Posted June 15, 2009 I thought none had proper gas tubes if at all? The 061 version(regular M4 handguards) does not have a gas tube. However, if you look at EBB's new pictures of the 062 closely you will in fact see a gas tube. -Luis Link to post Share on other sites
snorkelman Posted June 15, 2009 Report Share Posted June 15, 2009 $75 P&P for a $120 gun?! Is that gun only or with other items? Thank you in advanced for the pictures. Erik. 70 odd bucks postage is par for the course if you're using EMS etc. That said is still better than opposite direction -cost me best part of 50 dollars just to ship an AK barrel from UK to hongkong! Link to post Share on other sites
beretta Posted June 16, 2009 Report Share Posted June 16, 2009 Spare mags available from RSOV now. http://www.rsov.com/index.php?target=produ...product_id=3666 Link to post Share on other sites
falconfour4 Posted June 16, 2009 Report Share Posted June 16, 2009 Finally got mine this morning, not stopped or checked at customs . its very very nice. the stock is a bit cheap so i put my vltor one on and i changed the carry handle for a CA one which feels more sturdy. Had to tighten the delta ring a tad and there is a slight wobble in the body. Mag vented gas as soon as i filled it, but after a quick look around there is a black plastic piece that holds the hammer valve down (possibly so it doesnt damage the o rings when not gassed) after i pushed that down and refilled it has been fine. I am only using 134a gas in it and it seems to be about 310 going by the coke can method. here are a few pics For all of you that have the bolt not locking back, make sure the little switch on the top of the mag is switched to the rear of the gun, after i did that mine is working perfectly. A question for you all in the know, when i took the front off to tighten the delta ring, this spring fell out of somewhere, any ideas where it is supposed to go? Link to post Share on other sites
1st_shooter Posted June 16, 2009 Report Share Posted June 16, 2009 Wow loving that mate, im gonna order mine now, what do you think the performance would be like with 134a though in a skirmish? Its just a guess but the spring looks to be for the hop unit? And what stock is that for originaly AEG? as that would mean hopefully the buffer tube would easily fit other AEG stocks im hoping like a CTR. Oh how does the RIS feel and where did you order it from? Link to post Share on other sites
falconfour4 Posted June 16, 2009 Report Share Posted June 16, 2009 Dont think its from the hop, the book has an exploded diagram and i think it is from the ras but its all in japanese . The stock is an AEG one so any should fit. The gas is fine, rate of fire isnt amazing but thats good for me as long as the power isnt over 350. Link to post Share on other sites
1st_shooter Posted June 16, 2009 Report Share Posted June 16, 2009 Dont think its from the hop, the book has an exploded diagram and i think it is from the ras but its all in japanese . The stock is an AEG one so any should fit. The gas is fine, rate of fire isnt amazing but thats good for me as long as the power isnt over 350. Yeah im allowed 350 so im hoping Ultra should do it. Thats sweet about the AEG dimension buffer tube should be good news hopefully for CTR owners. I remember when i ordered a CTR for my Escort only to be Disapointed by the buffer tube being way to big! Link to post Share on other sites
Crimson Posted June 16, 2009 Report Share Posted June 16, 2009 I managed to contact Paul he got offended when i said i was angry with his service ( i was his first customer when he was called sunny side airsoft on ebay, hence when he got banned for selling fake crye Ebaybanned) He personaly got mine set a few hours after the e mail Now lets pray it dont get raped by customs Link to post Share on other sites
KWP Posted June 16, 2009 Report Share Posted June 16, 2009 The RIS version also has a full length gas tube right? I'm going to get mine this week too. Thanks, -Luis Yes, the RIS version has the fulll length gas tube. I bought it today and I am really impressed as it's a metal RIS and is easy to disassemble and re-assemble and looks the part. All I need to do is replace the rail covers against G&P ones with KAC trademarks, but that's just me. Here's is photo: Link to post Share on other sites
1st_shooter Posted June 16, 2009 Report Share Posted June 16, 2009 does the bolt catch on these need upgrading or is it already steel? Link to post Share on other sites
Erik Cartman Posted June 16, 2009 Report Share Posted June 16, 2009 Yes, the RIS version has the fulll length gas tube. I bought it today and I am really impressed as it's a metal RIS and is easy to disassemble and re-assemble and looks the part. All I need to do is replace the rail covers against G&P ones with KAC trademarks, but that's just me. Here's is photo: Is there any free-play on the hand-guard? Is the delta ring spring as strong as that of King Arms? Erik. Link to post Share on other sites
1st_shooter Posted June 16, 2009 Report Share Posted June 16, 2009 right submitted by EBB order cant wait now, as a tip peeps which i didnt no about anyways paul has the option to change currency on the top right hand corner which is actualy cheaper than paying through paypal in dollars! mine was £247 via pp in dollars or £244 with pauls own rate Link to post Share on other sites
KWP Posted June 16, 2009 Report Share Posted June 16, 2009 does the bolt catch on these need upgrading or is it already steel? It's still made of alloy. Is there any free-play on the hand-guard? Is the delta ring spring as strong as that of King Arms? Erik. No play in the hand-guard (the AGM may be poorly assembled, but tightening a screw here or there should do the trick). For example mine seemed to have a bent barrel, but it turned out the barrell was just not correctly seated. Never had a real KAC delta ring in my hands. The AGM one doesn't seem too strong, but is just okay to do its job. Link to post Share on other sites
beretta Posted June 16, 2009 Report Share Posted June 16, 2009 For all of you that have the bolt not locking back, make sure the little switch on the top of the mag is switched to the rear of the gun, after i did that mine is working perfectly. A question for you all in the know, when i took the front off to tighten the delta ring, this spring fell out of somewhere, any ideas where it is supposed to go? That actually looks like the spring from the bolt release catch, if you take out the mag catch the bolt catch will lift out. it should have a spring like that in it. And what stock is that for originaly AEG? as that would mean hopefully the buffer tube would easily fit other AEG stocks im hoping like a CTR. Yep it'll take AEG stocks no probs. it wont take AEG buffer tubes though. this is an AEG stock on mine, it now has a CTR though. Link to post Share on other sites
1st_shooter Posted June 16, 2009 Report Share Posted June 16, 2009 Sweet as i ordered one with my AGM, along with some other goodies ill get some pics and crono readings/rof when it gets here. Some brightspart needs to make WA/AGM Pmags Link to post Share on other sites
falconfour4 Posted June 16, 2009 Report Share Posted June 16, 2009 That actually looks like the spring from the bolt release catch, if you take out the mag catch the bolt catch will lift out. it should have a spring like that in it. I suppose it could be, the bolt catch lift plate doesnt feel like its sprung. How do i get it out to fit the spring back in? edit: just looked at the exploded diagram and it doesnt show a spring under it anyway. I wonder if perhaps it was in the gas tube slot at the body end, as the gas tube is very loose, perhaps it helps pack it out. Link to post Share on other sites
3vi1-D4n Posted June 16, 2009 Report Share Posted June 16, 2009 That actually looks like the spring from the bolt release catch, if you take out the mag catch the bolt catch will lift out. it should have a spring like that in it. Yep it'll take AEG stocks no probs. it wont take AEG buffer tubes though. this is an AEG stock on mine, it now has a CTR though. It looks like the hop up pressure spring. It does fall out when you pull the barrel out. Link to post Share on other sites
falconfour4 Posted June 16, 2009 Report Share Posted June 16, 2009 i didnt pull the barrel out just tightened the delta ring. i cant see any spring near the hop on the diagram Link to post Share on other sites
The_AUGfather Posted June 17, 2009 Report Share Posted June 17, 2009 Guys i bought my AGM DD RAS version from Ebay banned on the 8th ! its now the 15th of June and not even shipped or sent All i get are stupid e mails saying dont worry we ship asap ? What should i do ? File a dispute with PayPal, demand a full refund and state in the message how long you have waited. They refunded me yesterday, I got sick of waiting on them. They refunded me within 12 hours (which is about 72 hours sooner than most email responses I get from them) as the AGMs are FLYING out of HK by the droves, so they just sold it to the next person on the list I assume. Buy from eHobby. eBB sucks... I cant stand doing business with them.. this was the last transaction I'll ever suffer through with them. OR, as stated earlier, email Paul. ebayhihi(at)gmail.com, Selina and the rest of his misfit employees never get anything done in my experience.. every reply I get from his goons takes 2-4 days for a response and the last time I ordered something it took 12 business days just to get out of HK... Link to post Share on other sites
1st_shooter Posted June 17, 2009 Report Share Posted June 17, 2009 I dont no why Ebb gets such bad press i dont mind waiting as they are cheaper than everyone else! and i emailed paul after i ordred my AGM last night and he has already shipped it and sent me the tracking number Link to post Share on other sites
Erik Cartman Posted June 17, 2009 Report Share Posted June 17, 2009 File a dispute with PayPal, demand a full refund and state in the message how long you have waited. They refunded me yesterday, I got sick of waiting on them. They refunded me within 12 hours (which is about 72 hours sooner than most email responses I get from them) as the AGMs are FLYING out of HK by the droves, so they just sold it to the next person on the list I assume. Buy from eHobby. eBB sucks... I cant stand doing business with them.. this was the last transaction I'll ever suffer through with them. OR, as stated earlier, email Paul. ebayhihi(at)gmail.com, Selina and the rest of his misfit employees never get anything done in my experience.. every reply I get from his goons takes 2-4 days for a response and the last time I ordered something it took 12 business days just to get out of HK... It's better to pay more and have some certainty on delivery. Erik. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.