somegirls Posted April 18, 2009 Report Share Posted April 18, 2009 I heard that handguard fits on very snug. Besides, I use the falcon industries ergo grip and I love it. Quote Link to post Share on other sites
manchovie Posted April 18, 2009 Report Share Posted April 18, 2009 Anyone else have mad trouble adjusting their hopup? mine doesnt seen to be able to turn at all. Also, of the two of five mags i have that don't leak, one produces far stronger blowback than the other. I'm going to overhaul my mags and completely disassemble the upper today so i may find the problem but has anyone else had it? Quote Link to post Share on other sites
Marky [UE] Posted April 18, 2009 Report Share Posted April 18, 2009 I heard that handguard fits on very snug. Besides, I use the falcon industries ergo grip and I love it. Just to clarify I am not talking about the pistol grip, rather the actual MOE hand guard replacement. The RS version I have goes on well but has a slight rotational movement. Quote Link to post Share on other sites
chris u'5 Posted April 18, 2009 Report Share Posted April 18, 2009 Just to clarify I am not talking about the pistol grip, rather the actual MOE hand guard replacement. The RS version I have goes on well but has a slight rotational movement. I don't own a Magpul hand guard but this is a common problem with standard RIS units. I have always found that black tape added to the correct places inside the hand guard always does the trick. Obviously I'm not sure how well this would work with your Magpul but I usually place some strips along the length of the RIS and also some inside the grooves where it comes into contact with the collar of the barrel nut. Quote Link to post Share on other sites
somegirls Posted April 18, 2009 Report Share Posted April 18, 2009 Just to clarify I am not talking about the pistol grip, rather the actual MOE hand guard replacement. The RS version I have goes on well but has a slight rotational movement. I know. But what Chris said. You need to put thing strings of tape (scotch tape i.e.) on the the grooves or bolts or whatever part of the handguard that sits on the barrel nut. That way you get rid of the left-right wobble. Had that same prob with my DBoys RIS. Where did you purshase your Magpul MIAD grip from guys? Seems that Magpul don't ship it at the international... Magpul does ship internationally but I think only by Fedex express or something that costs $80. But you can buy those grips at almost any online gunpart store. Just google it, there will be a ton of shops in france for sure. Quote Link to post Share on other sites
alston251 Posted April 18, 2009 Report Share Posted April 18, 2009 What about UK? Which stores are good? I live in Wiltshire if that helps. Quote Link to post Share on other sites
chris u'5 Posted April 18, 2009 Report Share Posted April 18, 2009 Currently out of stock but... http://www.midwayuk.com/apps/eproductpage....leItemID=394843 Quote Link to post Share on other sites
alston251 Posted April 18, 2009 Report Share Posted April 18, 2009 (edited) Currently out of stock but... http://www.midwayuk.com/apps/eproductpage....leItemID=394843 They havent got all the stuff i wanted.... me want: Miad/MOE grip and the most wanted ASAP sling mount and sling... Shame Hong Kong doesn't have much Gucci gear.... Or it really would be a airsoft shopping paradise... no matter GBB or AEG Edited April 18, 2009 by alston251 Quote Link to post Share on other sites
chris u'5 Posted April 18, 2009 Report Share Posted April 18, 2009 No shop ever has everything you want! Welcome to the life of an airsofter. On another note, has anyone heard anymore news about the aftermarket receivers? Quote Link to post Share on other sites
trinco Posted April 18, 2009 Report Share Posted April 18, 2009 No shop ever has everything you want! Welcome to the life of an airsofter. On another note, has anyone heard anymore news about the aftermarket receivers? WETTI talked to DYTAC & they will be coming out with the MUR upper for WE M4 very soon http://picasaweb.google.com/CWZ1975/WEMUR# Quote Link to post Share on other sites
IronWolf Posted April 18, 2009 Report Share Posted April 18, 2009 WETTI talked to DYTAC & they will be coming out with the MUR upper for WE M4 very soon http://picasaweb.google.com/CWZ1975/WEMUR# Thats awesome that they're going to be supporting the WE platform, hopefully it sells well enough to warrant releasing an entire VIS upper Quote Link to post Share on other sites
Victory Posted April 18, 2009 Report Share Posted April 18, 2009 (edited) WETTI talked to DYTAC & they will be coming out with the MUR upper for WE M4 very soon http://picasaweb.google.com/CWZ1975/WEMUR# "Oh, why, hell yeah." -Vic Edited April 18, 2009 by Victory Quote Link to post Share on other sites
chris u'5 Posted April 18, 2009 Report Share Posted April 18, 2009 What about lower receivers? Was there not some discussion about those a while back? Quote Link to post Share on other sites
redline Posted April 18, 2009 Report Share Posted April 18, 2009 Man...I'm still waiting for my inner barrel. AB and WETTI said they'd take care of my "non-fitting" cqb barrel...but nada. Quote Link to post Share on other sites
redline Posted April 19, 2009 Report Share Posted April 19, 2009 (edited) Guys, what's the purpose of #37? The O-ring at the other end of the nozzle? The one near the end you screw onto the bolt carrier...what does it do? ..and has anyone succesfuly figured out how to lower FPS? I ordered the 300 fps steel nozzle, and the damn thing was shooting over 400 FPS with .30!!! Someone mentioned sticking something in the nozzle area...like a bearing bushing or something to puch the inner floating nozzle closer up into the spring...did it work? What did you use? Edited April 19, 2009 by redline Quote Link to post Share on other sites
Horsem4n Posted April 19, 2009 Report Share Posted April 19, 2009 they probably sent you the wrong nozzle (pics?) Quote Link to post Share on other sites
chris u'5 Posted April 19, 2009 Report Share Posted April 19, 2009 Man...I'm still waiting for my inner barrel. AB and WETTI said they'd take care of my "non-fitting" cqb barrel...but nada. I had the same problem but I fitted it myself rather than contact them. 10 minutes with some 800 grit and some silicone oil fixed the problem, not before it got completely stuck though! It took all day to fix that problem. Quote Link to post Share on other sites
skoda Posted April 19, 2009 Report Share Posted April 19, 2009 I am just wondering if the afc versions sold at tacticalquartermaster are supposed to have trades on them as a friend got one without markings and I was lead to believe that afc versions are trademarked Quote Link to post Share on other sites
Horsem4n Posted April 19, 2009 Report Share Posted April 19, 2009 (edited) the AFC versions are supposed to have trademarks. your friend got duped into buying a V1. Edited April 19, 2009 by Horsem4n Quote Link to post Share on other sites
Marky [UE] Posted April 19, 2009 Report Share Posted April 19, 2009 Where did you purshase your Magpul MIAD grip from guys? Seems that Magpul don't ship it at the international... I am not sure if they ship outside of the UK but this is the site I bought my MIAD from: Southern Gun Company (UK) as previously mentioned this is the BASIC kit and not the FULL kit, the title on the product description is incorrect. They havent got all the stuff i wanted.... me want: Miad/MOE grip and the most wanted ASAP sling mount and sling... Shame Hong Kong doesn't have much Gucci gear.... Or it really would be a airsoft shopping paradise... no matter GBB or AEG Magpul are unable to export any weapon parts including sling mounts, grips, stocks etc. due to US ITAR restrictions (google it). They can ship the slings (I have a couple on the way) but you will have to find a friend in the US to help with the other bits. My sling mounts and RS hand guard have been helped to the UK by a good friend Quote Link to post Share on other sites
chris u'5 Posted April 19, 2009 Report Share Posted April 19, 2009 I am just wondering if the afc versions sold at tacticalquartermaster are supposed to have trades on them as a friend got one without markings and I was lead to believe that afc versions are trademarked TQM was selling both versions. Perhaps your friend ordered the wrong one? If not, I'm sure the owner of TQM will sort it out if he contacts him. He's a very decent person. Quote Link to post Share on other sites
WETTI Posted April 19, 2009 Report Share Posted April 19, 2009 Guys, what's the purpose of #37? The O-ring at the other end of the nozzle? The one near the end you screw onto the bolt carrier...what does it do? ..and has anyone succesfuly figured out how to lower FPS? I ordered the 300 fps steel nozzle, and the damn thing was shooting over 400 FPS with .30!!! Someone mentioned sticking something in the nozzle area...like a bearing bushing or something to puch the inner floating nozzle closer up into the spring...did it work? What did you use? Try this... (a method suggested by one of your fellow members ) Quote Link to post Share on other sites
WETTI Posted April 19, 2009 Report Share Posted April 19, 2009 What about lower receivers? Was there not some discussion about those a while back? Patience...Chris... patience Good things come to those who waits..... (that's the exact quote I got from....'whoever') Quote Link to post Share on other sites
Bangla_Black Posted April 19, 2009 Report Share Posted April 19, 2009 Found this WE vs G&P gbb m4 with lots of pics. LINK Quote Link to post Share on other sites
chris u'5 Posted April 19, 2009 Report Share Posted April 19, 2009 (edited) That's a nice comparison review. Thanks for the link Bangla. Edited April 19, 2009 by chris u'5 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.