Horsem4n Posted September 1, 2009 Report Share Posted September 1, 2009 Some more photos with the extras: Banged a few more mags through it recently and still the hinge plate is holding. i will probably order a couple of spares though just in case! how long is that suppressor my friend? in millimeters please. man, i wish someone would come out with short mags in both CO2 and green gas. Quote Link to post Share on other sites
rvp69 Posted September 1, 2009 Report Share Posted September 1, 2009 The RA tech NPAS for WE SCAR is now available.sweet!! Quote Link to post Share on other sites
Tony007x Posted September 3, 2009 Report Share Posted September 3, 2009 anyone know how i can increase the accuracy of my scar? Its really off!. Quote Link to post Share on other sites
baggard Posted September 3, 2009 Report Share Posted September 3, 2009 I'd highly recommend it. The mods being done seems relatively cheap and not too difficult. Mines still in one piece but thats because I don't have much time to use it lately. For anyone who fired an inokatsu GBB and the WE SCAR, how do they compare? I've been watching youtube vids on GBBRs and it looks like the inokatsu is the only GBBR that delivers the same amount of recoil as the WE SCAR. All the others look pretty.... pathetic. listening to people and watching videos about the blowback isnt going to help much. the best way is to get one off your friends and feel it yourself. not everyone is the same Quote Link to post Share on other sites
Horsem4n Posted September 3, 2009 Report Share Posted September 3, 2009 (edited) anyone know how i can increase the accuracy of my scar? Its really off!. being the fact that the barrel is already a really precise 6.02 and the hop ups not gettng any better, try using heavy BBs, like .27+ grams. if that doesnt work, contact EdGi and order a 6.01 barrel. thats about all you can do. my plan is to get a M16 length 6.01 and hide it with a suppressor. using heavy BBs is something you should always do, but yours could be a lemon hop. take your barrel out and check the hop up rubber. it could be malformed. Edited September 3, 2009 by Horsem4n Quote Link to post Share on other sites
arivee Posted September 4, 2009 Report Share Posted September 4, 2009 The RA tech NPAS for WE SCAR is now available. What US retailer carries the RA Tech products? Failing that - which HK retailer would have the SCAR NPAS? Quote Link to post Share on other sites
julietcharlie Posted September 4, 2009 Report Share Posted September 4, 2009 (edited) http://en.ratech.com.tw/product/rag/rag_we/rag_we.php RA Tech have a weird way of doing business you have to email them first to make an order. Anyone seen the NPAS sold anywhere else? Edited September 4, 2009 by julietcharlie Quote Link to post Share on other sites
cis_destiny Posted September 4, 2009 Report Share Posted September 4, 2009 Sirs, what do you need the npas for? is it to increase your fps or to lower it? Quote Link to post Share on other sites
Schaap Posted September 4, 2009 Report Share Posted September 4, 2009 Decrease. I've 'ordered' mine the day it was released, and paid it right after I got the shipping cost quotation.. haven't heard a word of them since then... Quote Link to post Share on other sites
cis_destiny Posted September 4, 2009 Report Share Posted September 4, 2009 just a simple nut would have done it sir Quote Link to post Share on other sites
Horsem4n Posted September 4, 2009 Report Share Posted September 4, 2009 (edited) the NPAS has the convenience to adjust the FPS of your rifle with the turn of a screw. you can play an out door game with a 450 FPS rifle one hour and switch to playing a 325 fps CQB game another hour without as much as removing the bolt. its just convenience, like a TV remote. you dont need one, but its nice and in your comfort zone. when it comes to home brew mods, its usually permanent and crude. Edited September 4, 2009 by Horsem4n Quote Link to post Share on other sites
Schaap Posted September 4, 2009 Report Share Posted September 4, 2009 @cis_destiny: you are wrong. I've tried putting a nut and a counter-nut on the thread, but it kept getting loose by the shocks the nozzle gets from each shot. Loctite is pretty useless, as it makes the system not adjustable. Because I go playing tomorrow, and haven't received my NPAS yet, I am using a fixed-length tube to get it down to 340fps. However, this is quite unstable, and sometime causes the FPS to drop to <150fps. I don't know if you have tried, but the margin for regulating the nozzle is very small. Decreasing the tube length by only 0.1mm can increase the FPS by 30fps!!! Anyway, I'm sure the RA-Tech will be worth it's $40. If it is not, you'll hear from me. Quote Link to post Share on other sites
Pantelis Posted September 5, 2009 Report Share Posted September 5, 2009 Just installed NPAS in my SCAR and in my M4. Simple installation of course and the results were the expected. I have adjusted both guns at 410 fps and test fired a mag in each of them. Fps variations were at a logical plus-minus 7. I am curious if this stability is going to remain with the recoil forces-shock of a day long skirmish which i am going to play in a few days. I am going to keep you informed. p.s. The nozzle head is the same in both scar and m4 so i ordered 2xNPAS kits and installed the valve in my m4 rod. Quote Link to post Share on other sites
cis_destiny Posted September 5, 2009 Report Share Posted September 5, 2009 @schaap, don't tell me that I am wrong. Just a nut reinforced with locktite will decrease your fps right? Its just that its not applicable for you since you want it to be adjustable. Got my SCAR and have modified it from 390fps to 5++fps. That is without spending for any upgrades. Quote Link to post Share on other sites
zooyork123 Posted September 6, 2009 Report Share Posted September 6, 2009 Any know where i can get a trigger group for the SCAR my hammer just exploded today during a game the hammer just split in half half still intact and other half and roller is gone. Does the WETTI M4 hammer work on the scar? Quote Link to post Share on other sites
whosloosin92 Posted September 6, 2009 Report Share Posted September 6, 2009 The WE M4 hammer should work. AirsoftBuddy sells reinforced hammers as well as entire replacement trigger units although I don't know if they are in stock. Quote Link to post Share on other sites
JaKe_NZ Posted September 6, 2009 Report Share Posted September 6, 2009 Ahh well, My WE SCARs been great so far, been in one game, first off the hop was *suitcase*, wore it in a bit. Now its sweet!! soo accurate, for the record it took about 500 shots to wear it in. and ive put about 1200 rounds through it so far. All good no complaints! even good in cold weather! Quote Link to post Share on other sites
Revenge Seeker Posted September 7, 2009 Report Share Posted September 7, 2009 Mine's still working fine and I was one of the first to get it. Who knows how much mag's been through it already. Original stock plate still hasn't broken.. Added some rail covers and a new flash hider. I didn't want to bother ordering the proper SCAR flash hider so I just got w/e my local shop had. It was glued on so it needed a blowtorch. Yes, the "flower" flashhider. Quote Link to post Share on other sites
Zaboomafoo Posted September 7, 2009 Report Share Posted September 7, 2009 Very nice looking gun. My VFC is phased Officially! Haha Just kidding. Sorry if I haven't caught this in the review or posts but , how much are the mags? And is it metal as in a magnet can stick to them? Quote Link to post Share on other sites
Horsem4n Posted September 7, 2009 Report Share Posted September 7, 2009 the body is aluminum. but i believe most of the other hardware is steel. Quote Link to post Share on other sites
Genome Posted September 7, 2009 Report Share Posted September 7, 2009 For the NPAS kit, You have to cut the existing one just like the RA tech video? is the installation easy as it looks? Quote Link to post Share on other sites
Schaap Posted September 7, 2009 Report Share Posted September 7, 2009 No, you can screw of the nozzle (beware: it can be fixed very hard with loctite) of the guiding rod and remove it. And indeed, the installation should be pretty straight-forward... if only RA-Tech would ship mine I've got mine down to 300-330fps with .2gr. With .25gr, I had to dial in my hop-up quite a bit, so I am hoping that the hop will function fine with .2gr too. I have used my SCAR on 2 CQB skirms, in the first, the SCAR was spitting BB's 5m after about 10 mags. After adjusting my "FPS reducer", the SCAR shot every BB without a problem. I hope that the NPAS from RA-Tech will make it a bit more consitent, making the grouping better. I don't know about the hop-up rubber... it now shoots pretty flat, but the BB's go to the right quite badly. Quote Link to post Share on other sites
cis_destiny Posted September 7, 2009 Report Share Posted September 7, 2009 For the NPAS kit, You have to cut the existing one just like the RA tech video? is the installation easy as it looks? Sir, Better to use a lighter torch to loosen the rod and keep it as a spare. Quote Link to post Share on other sites
Genome Posted September 7, 2009 Report Share Posted September 7, 2009 Hmm, ok another question on your SCAR does your hop up go up and down? i have a feeeling i have a faulty one when i use the knob it doesnt go up or down. I look down the barrel and it just site there Quote Link to post Share on other sites
Crusader452 Posted September 7, 2009 Report Share Posted September 7, 2009 So does anyone have a VFC SCAR to compare the externals to this scar? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.