TheFull9 Posted January 12, 2011 Report Share Posted January 12, 2011 Too bad the gasblock still protrudes outside the RIS.... Why would that matter? If it were me, I'd quite like the look. Quote Link to post Share on other sites
Philbucknall Posted January 12, 2011 Report Share Posted January 12, 2011 Why would that matter? If it were me, I'd quite like the look. And conversely some won't like the look. Personally, I'm not too bothered. I would prefer it to look like the pic in my signature but I'll survive if the gas block sits an inch further forward of the end of the RIS. Quote Link to post Share on other sites
TheFull9 Posted January 12, 2011 Report Share Posted January 12, 2011 I can quite understand that of course, everyone has their tastes they're quite entitled to. Just seemed like an extremely minor thing. Quote Link to post Share on other sites
justm Posted January 12, 2011 Report Share Posted January 12, 2011 (edited) Thank for the heads up with the sling mount. Sorry for the confusion but it's my first AEG and consequently my first sling so I don't want to chuck money around unnecessarily but nor do I want a sling that I can't fit because I'm missing something. I gather that it wont fit through the existing sling plate on the Masada then. Edited January 12, 2011 by justm Quote Link to post Share on other sites
Philbucknall Posted January 12, 2011 Report Share Posted January 12, 2011 Nope it won't you'll need the larger sling plate that is a direct screw in replacement for the flat one on there already. It's about £20 or so from places like firesupport to name but one and of course other magpul retailers! Quote Link to post Share on other sites
BerserkDS Posted January 13, 2011 Report Share Posted January 13, 2011 Ordered it from rsov. Free shipping and 12% off right now. Way cheaper than buying it anywhere locally. Quote Link to post Share on other sites
Noveske Posted January 13, 2011 Report Share Posted January 13, 2011 I can quite understand that of course, everyone has their tastes they're quite entitled to. Just seemed like an extremely minor thing. Again... minor to some, major to others... Quote Link to post Share on other sites
hmg9194 Posted January 13, 2011 Report Share Posted January 13, 2011 Has magpul released the RIS handguard yet or are people just getting the rs one? I looked around and couldn't find it.. Quote Link to post Share on other sites
anonimouse9 Posted January 14, 2011 Report Share Posted January 14, 2011 I have an ms2 on my ACR, works great so far, and it adjusts better than any sling I've owned. In 5'3" so its hard to find a sling that adjusts to my height. Great to hear. I just ordered a MS2, the ACR single sling point, and a magpul rail slingpoint for the front. Can't wait to install it. Quote Link to post Share on other sites
Slayer750 Posted January 14, 2011 Report Share Posted January 14, 2011 Has magpul released the RIS handguard yet or are people just getting the rs one? I looked around and couldn't find it.. Not out on any retailer websites I've seen. Dingodogs did announce that they have them, though. Quote Link to post Share on other sites
Megalomaniac Posted January 14, 2011 Report Share Posted January 14, 2011 Pictures of the 11.5 CQC. Sorry for the lack of image quality, better camera and pictures of the guns is due. Quote Link to post Share on other sites
Apocalypsemeow Posted January 14, 2011 Report Share Posted January 14, 2011 (edited) Just ordered the RIS handguard (FDE) from Dingodogs, will let you know my opinions on it when it arrives Edited January 14, 2011 by Apocalypsemeow Quote Link to post Share on other sites
Philbucknall Posted January 14, 2011 Report Share Posted January 14, 2011 (edited) Fitted with both barrel lengths! Edited January 14, 2011 by Philbucknall 1 Quote Link to post Share on other sites
Apocalypsemeow Posted January 14, 2011 Report Share Posted January 14, 2011 Damn Phil that is looking awesome Have you changed the hop rubber in the new barrel or are you just using the stock one? I'm guessing it's the same as the original hop rubber? Quote Link to post Share on other sites
anonimouse9 Posted January 14, 2011 Report Share Posted January 14, 2011 Pictures of the 11.5 CQC. Sorry for the lack of image quality, better camera and pictures of the guns is due. How much was this again? I'm already thinking too much for what amounts to be maybe 1.5 to 2 inches of difference. Though I'm looking forward to the longer DMR barrel. Quote Link to post Share on other sites
anonimouse9 Posted January 14, 2011 Report Share Posted January 14, 2011 Need recommendations. I'm looking into optics for my Masada. What looks better? (I already have the AFG, thr fron MBUS 9replaced the existing cheap one, and I have the scope already from my M4). Quote Link to post Share on other sites
Megalomaniac Posted January 14, 2011 Report Share Posted January 14, 2011 How much was this again? I'm already thinking too much for what amounts to be maybe 1.5 to 2 inches of difference. Though I'm looking forward to the longer DMR barrel. 150 from my local shop, honestely it doesn't look much shorter, but on the gun its a massive difference. Quote Link to post Share on other sites
hmg9194 Posted January 14, 2011 Report Share Posted January 14, 2011 Whew that is lookin good Phil... I dont know if I want to buy those now or some parts for it is the shorter barrel and rail front a limited edition/non made forever kind of thing? If so I might want to pick those up while I can.... Quote Link to post Share on other sites
LeftyFlip Posted January 14, 2011 Report Share Posted January 14, 2011 the only accessory that I've heard is supposed to be a limited edition is the FDE suppressor. Quote Link to post Share on other sites
Philbucknall Posted January 14, 2011 Report Share Posted January 14, 2011 (edited) Thanks guys, I like it! I've got virtually every gun I need in that case. Just waiting on the ACOG but the AFG arrived earlier so it is now looking closer to my sig picture than ever! The barrel snd suppressor i got for £140 fron HK. The RIS unit is going to be a permanent edition I think as an accessory but as leftyflip said the DE suppressor is limited edition I don't know how many though; I thought it was about 500-1000 units. Adding everything for that one gun puts the total at around £850 Inc case and optics!! Oh, stuck with standard hop rubber but might chuck an element one in there when I can get round to it. Edited January 14, 2011 by Philbucknall Quote Link to post Share on other sites
hmg9194 Posted January 14, 2011 Report Share Posted January 14, 2011 oh! well if it's not limited edition then ill just get it later! internals! yaaaaaay! I was going to pick it up for the sake of getting one but not anymore, at least right now. Quote Link to post Share on other sites
Megalomaniac Posted January 15, 2011 Report Share Posted January 15, 2011 A few notes on the 11.5. -Don't crank it all the way in, I did this and had NO power, seems like it squished the lip on the bucking and negated the air seal, lightly locking it down seemed to work for myself and another user. -Hop-Up, the bucking on these are garbage, my 14.5 can over hop even .27s into the stratosphere, but these struggled to fling a .27 flat at 25m. Another users was even worse resulting in struggling to properly hop even .2s. -Accuracy, once set properly I'd say it was just as accurate as the 14.5 out to 25m. Quote Link to post Share on other sites
Philbucknall Posted January 15, 2011 Report Share Posted January 15, 2011 Also, the 11.5 i have was absolutely filthy inside. In fact i though i saw a BBC film crew doing a documentary on the origins of life from primordial slime in there! The other thing was that the inner wasn't quite centred in the outer; it was canted to the left so that needed sorting too. A few more photos of it all neatly squared away! Quote Link to post Share on other sites
hmg9194 Posted January 17, 2011 Report Share Posted January 17, 2011 Hey phil, I know it is an inconvenience but next time you have that out, can you check something for me? Would a battery that is 168mms long fit in the railed hand guard nicely or would it stick out of the front? If not would a battery that is 19x15mm thick battery fit? About to order my batteries for the coming projects and I may be able to use 1 set of batteries for 2 guns if the length on that first one is ok.. Anyway thanks! it looks really good, can't wait to get mine lookin about the same! Quote Link to post Share on other sites
Philbucknall Posted January 17, 2011 Report Share Posted January 17, 2011 will do mate. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.