you can`t shoot me Posted October 28, 2016 Report Share Posted October 28, 2016 I picked up an orga magnus vsr 200mm widebore to bring the fps down as i thought most tm gbbs were all vsr cut but unfortunely the barrel cuts are not in the right position for the tm m4 or any of the gbb pistols, so must just be vsr only. Still haven`t decided wether to try to make new cuts slightly further down the barrel or just try to sell it on and try to lower the power via the nozzle. Quote Link to post Share on other sites
Leshy Posted October 28, 2016 Report Share Posted October 28, 2016 (edited) I've heard wa barrel cut matches but I'm looking confirmation. Edited October 28, 2016 by Leshy Quote Link to post Share on other sites
Leshy Posted October 29, 2016 Report Share Posted October 29, 2016 Anyone tried a Low flow restrictor in this and can any one find the Arnies topic on homemade discs? Quote Link to post Share on other sites
CALLAHAN_88 Posted November 18, 2016 Report Share Posted November 18, 2016 New home for my MWS! 1 Quote Link to post Share on other sites
Bada Bing Posted November 20, 2016 Author Report Share Posted November 20, 2016 Hell of a nice rig you got there mate, there's definitely something extra special about having a hard case with clean and well organised interiors. I've recently bought the UAC lightweight Bolt Carrier for the MWS and it's unbelievably fast. I'm in the middle of putting together a video of it at the moment but first here's a little look at the performance in cold weather. Not quite freezing however it's the similar temperatures I experienced when I used it at Senny Bridge at the tail end of last winter. Quote Link to post Share on other sites
tinydata Posted April 13, 2017 Report Share Posted April 13, 2017 Any consensus on the long term durability of this rifle with GG/propane? I may pick one up for garage shooting if I can find it used. Quote Link to post Share on other sites
KyleKatarn Posted April 29, 2017 Report Share Posted April 29, 2017 (edited) Hey, so I really want a MWS, but the issues with the gritty trigger are holding me back. I've seen this video where someone seems to have fixed it, does anyone know which parts of the trigger assembly I need to dremel off/down to achieve a short trigger reset and initial trigger pull travel? Edited April 29, 2017 by KyleKatarn Quote Link to post Share on other sites
CaptCalvin Posted April 29, 2017 Report Share Posted April 29, 2017 Probably ill-advised. The trigger components in the MWS are chrome plated to prevent wear. You'd be removing this protection if you start filing away on these. Quote Link to post Share on other sites
tinydata Posted May 1, 2017 Report Share Posted May 1, 2017 Hey, so I really want a MWS, but the issues with the gritty trigger are holding me back. I've seen this video where someone seems to have fixed it, does anyone know which parts of the trigger assembly I need to dremel off/down to achieve a short trigger reset and initial trigger pull travel? I picked one up because I felt that Marui's past record justified giving the MWS a chance. So far, loads better than any G&P or Inokatsu that I ever owned. I really wouldn't worry about the trigger. It feels light compared to an actual GI trigger, which is gritty and heavy anyways Quote Link to post Share on other sites
Bastel Posted May 5, 2017 Report Share Posted May 5, 2017 Hast anybody a Source for the A2 Buttstock? Quote Link to post Share on other sites
tinydata Posted June 5, 2017 Report Share Posted June 5, 2017 (edited) I finally found the time to take this to an outdoor game and I'm very pleased. After dealing with G&P/Inokatsu years ago I had given up on GBBRs but the Marui offering is a whole different animal. Accuracy isn't as good as the usual legendary Marui performance but it is still quite good. I had quite a few kills where opponents saw me and simply assumed that I couldn't shoot that far. Photo credit to Anthony Luna of Corpus Christi Airsoft And the old school M4A1 is just so...classic Edited June 5, 2017 by tinydata 1 Quote Link to post Share on other sites
CplHicks Posted June 13, 2017 Report Share Posted June 13, 2017 Does anyone know what ready mags fit these? Quote Link to post Share on other sites
Beeingmyself Posted June 13, 2017 Report Share Posted June 13, 2017 So after this time beeing around time for some sum up. What fps can be expected out green gas out of the box? What needs to fixed exchanged for beeing reliable and smooth shootin?? Are mag and parts avaible over all??? Quote Link to post Share on other sites
Hite Posted September 8, 2017 Report Share Posted September 8, 2017 So after this time beeing around time for some sum up. What fps can be expected out green gas out of the box? What needs to fixed exchanged for beeing reliable and smooth shootin?? Are mag and parts avaible over all??? So fps out of the box with GG is about 370fps. Nothing really need to be fixed or exchanged. A lot of people (myself included) replaced the hop with a WiiTech hop arm and a uac hop rubber. But not really needed. I put an NPAS in mine to bring it legal for UK gaming. I also removed the silver tubes in the mags. Part and mag availability is so-so atm. Quote Link to post Share on other sites
AG1212 Posted February 17, 2018 Report Share Posted February 17, 2018 Will aeg spec rail systems fit these out of the box? Quote Link to post Share on other sites
Boba_Fett Posted May 17, 2019 Report Share Posted May 17, 2019 On 6/13/2017 at 7:52 PM, Beeingmyself said: What fps can be expected out green gas out of the box? What needs to fixed exchanged for beeing reliable and smooth shootin?? Are mag and parts avaible over all??? I played mine two weeks ago with 0,5 gr BBs and it rocks. Due to the physiks of GBBR the chrono says 1,5 Joule. Chroned with 0,2 gr the Display said 0,9. So go for the heavier BBs Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.