Brigg Posted December 11, 2015 Report Share Posted December 11, 2015 How often do you really need to empty a shell of 10 shots in seconds? If I needed that kind of rof I'd just be using an AEG anyway. Every time I use a shotgun, actually. i dont need my arms to get sore while im just trying to defend a doorway or when I run into an enemy group. If I cant fire quickly while going in and out of cover, because the action is just too hard to manipulate, then why would I want to use that gun. Anyway. In my mind wanting it to be a tri-shot springer is kind of like hoping for a stale fruitcake for Christmas. I'd rather it be something exciting. Link to post Share on other sites
blobface Posted December 12, 2015 Report Share Posted December 12, 2015 I officially feel that any new shell ejecting shotgun is doing it wrong if it doesn't just adapt the APS rounds.... it's easier to build with no inner barrel, way more realistic, better functionality with more ammo per shot, and weirdly, cheaper shells... but being Madbull there's of course no chance, even if it's shell ejecting it'd be their own gold ones. A TM 870 style gas pump is also very unlikely, so my guess is, springer / Madbull shell ejecting.. personally routing for springer as it means I'll actually use it in games.. Link to post Share on other sites
renegadecow Posted December 12, 2015 Report Share Posted December 12, 2015 Springers aren't bad if it's the TM system. Mind, there's also the single shot CA870 and whatever the hell KTW uses on their two-shot system. THOSE would be more like stale fruitcakes. If it did use the TM system though I'd at least expect it to hold 2 shells/magazines at the same time to realistically double the capacity as otherwise it would just be a CYMA 870 in a fancy shell. Link to post Share on other sites
Cire_ Posted December 15, 2015 Report Share Posted December 15, 2015 I like shell ejection.. If it was that i would not use them to play. To play with it's too much trouble tbh. Link to post Share on other sites
Alias1983 Posted December 15, 2015 Report Share Posted December 15, 2015 I'd love for a gas system not cloned from marui, I'd love shells not cloned from marui. I have had bad experiences with marui shotgun stuff, tm and clone. Not impressed I do want to know how this is going to be. I am not fan of mag fed systems. I much prefer aps, being a lefty I turn the gun a lil sideways so the shell goes to the floor. I use shell catchers no matter how "ugly" it is. Link to post Share on other sites
renegadecow Posted December 15, 2015 Report Share Posted December 15, 2015 A shell catcher on a KSG would mean no reloads for you since it eats and poops from the same hole. Link to post Share on other sites
Alias1983 Posted December 15, 2015 Report Share Posted December 15, 2015 I bet it will be mag feed. Can't imagine tm shells, for all we know its an aeg. Link to post Share on other sites
Brigg Posted December 15, 2015 Report Share Posted December 15, 2015 Hmm, you know, I seem to remember then saying a long time ago that the MSRP would be around the 100-150 USD range. If that's still the case then I would almost certainly expect a springer. Link to post Share on other sites
Habakure Posted December 15, 2015 Report Share Posted December 15, 2015 Won't bother me if it's a springer, just so long as it's tri-shot springer. Also, it's hot. Bonus points for hotness. Link to post Share on other sites
renegadecow Posted December 15, 2015 Report Share Posted December 15, 2015 I have a bad feeling it's going to turn out like their (quite literally) half baked PMR-30. Link to post Share on other sites
Habakure Posted December 15, 2015 Report Share Posted December 15, 2015 Got a craving for cherry bake wells now. . . Link to post Share on other sites
vorpalbunnie Posted December 15, 2015 Report Share Posted December 15, 2015 I have a bad feeling it's going to turn out like their (quite literally) half baked PMR-30. I c wat u did thar Link to post Share on other sites
paranoiddroid Posted December 15, 2015 Report Share Posted December 15, 2015 Lol the press rounds in mag than in the real one. I hope this isn't poo Link to post Share on other sites
Skarclaw Posted December 16, 2015 Report Share Posted December 16, 2015 What? Link to post Share on other sites
swatti Posted December 16, 2015 Report Share Posted December 16, 2015 Looks like there's decent amount of metal parts... No way this is sub 200 bucks. Suppose it was a new springer system for 3 or more, I'd imagine 400+ price-range. As mentioned, Madbull making the 870 shells is worrying. Link to post Share on other sites
Brigg Posted December 16, 2015 Report Share Posted December 16, 2015 you know, there is another shotgun system that a lot of us forget exists. The WG shotgun system. http://www.evike.com/products/33386/ I doesnt use shells, it uses a spring chamber holding 30 rounds. And its functionally the same as many other nbb pistols, like the PMR-30 that socom gear marketed. (Was it them who marketed that? Im honestly not sure if the system itself was any good as I never did try one myself. Link to post Share on other sites
vorpalbunnie Posted December 16, 2015 Report Share Posted December 16, 2015 you know, there is another shotgun system that a lot of us forget exists. The WG shotgun system. http://www.evike.com/products/33386/ I doesnt use shells, it uses a spring chamber holding 30 rounds. And its functionally the same as many other nbb pistols, like the PMR-30 that socom gear marketed. (Was it them who marketed that? Im honestly not sure if the system itself was any good as I never did try one myself. I've heard that they are actually stupid fun to use because of how simple they are. Though not a true shotgun because of a single barrel. They were discontinued for a bit and were actually selling for above retail on the used market. Link to post Share on other sites
renegadecow Posted December 16, 2015 Report Share Posted December 16, 2015 Are those the Walther branded ones? But weren't those running on a double action system? Link to post Share on other sites
Brigg Posted December 16, 2015 Report Share Posted December 16, 2015 yeah they're double action. same as all those c02 nbbs. Its the simplest system there is really. I cant see them being any worse then the marushin 500 clones that were 5 shot 6mms. Those were a single barrel as well. Link to post Share on other sites
renegadecow Posted December 16, 2015 Report Share Posted December 16, 2015 The problem with those is they need to pass chrono should only a single bb gets loaded. With my Serbu it isn't an issue, but on a full length barrel that usually means a whole lot of Joules. Link to post Share on other sites
ED-SKaR Posted December 17, 2015 Report Share Posted December 17, 2015 The problem with those is they need to pass chrono should only a single bb gets loaded. With my Serbu it isn't an issue, but on a full length barrel that usually means a whole lot of Joules. The design I'm working on has a feature that prevents it chambering if underloaded and, honestly, it's the most fiddly part of the design. Link to post Share on other sites
paranoiddroid Posted December 17, 2015 Report Share Posted December 17, 2015 What? Sorry that was auto correct misery combined with speech to text and me not checking because I was half asleep. Translation follows: The PMR30 makes me laugh because madbull could only manage 15 round magazines in an air soft clone of a gun which has 30 round magazines as it's only real claim to fame other than using a cartridge which replicates 5.7 balistics at a cheaper price. It does replicate the real one well in that the one iv handled jams constantly though so much realism so wow. Link to post Share on other sites
paranoiddroid Posted December 17, 2015 Report Share Posted December 17, 2015 The design I'm working on has a feature that prevents it chambering if underloaded and, honestly, it's the most fiddly part of the design. Similar to the airsoft innovation shotgun where the power varies if it's underloaded or simply if there isn't X amount of bb's it won't fire? The sg9000 had problems practically speaking because there was a single bb setting people could use at a higher power so in terms of usability on sites that would worry me. Link to post Share on other sites
svman Posted December 20, 2015 Report Share Posted December 20, 2015 Well personally i hope this will be using the madbull ss6 shells.i run a long barrled as well as a sawn off mad max as well a tanaka m870 off them. Ive got 60 of the shells and if this turned out to be compatable i would be a happy bunny indeed. With guarder black gas and a long barrle the madbull ss6 can spit .2s thurther than a springer tri shot with a very satisfying noise too. Apart from replacing the odd o ring every now and again they are pretty much indistructable. Saying that i'll probably be picking one of these up regardless of the internals cause it just looks badass. Link to post Share on other sites
CatgutViolin Posted December 27, 2015 Report Share Posted December 27, 2015 you know, there is another shotgun system that a lot of us forget exists. The WG shotgun system. http://www.evike.com/products/33386/ I doesnt use shells, it uses a spring chamber holding 30 rounds. And its functionally the same as many other nbb pistols, like the PMR-30 that socom gear marketed. (Was it them who marketed that? Im honestly not sure if the system itself was any good as I never did try one myself. I've heard that they are actually stupid fun to use because of how simple they are. Though not a true shotgun because of a single barrel. They were discontinued for a bit and were actually selling for above retail on the used market. Not a true shotgun because of a single barrel? I'm not sure what you're getting at, lots of multi-BB airsoft shotguns use a single barrel. Those SG9000s can be set to tri-shot mode and are extremely entertaining firing bursts of three as quickly as you can pull the trigger. No shells, no magazine, and the huge CO2 tank is good for 1000+ shots so all you have to do is fill it up with a speedloader when it runs out. It may not be the most realistic airsoft shotgun on the market but since they typically sell for about the same as a springer tri-shot around here they're well worth the price. I'd love to see the same system put into a pump-action or a more realistic gun, it was simple and it worked. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.