Dahmer45 Posted October 18, 2010 Report Share Posted October 18, 2010 Uppers are the same, lowers are not. Due to the RPK barrel being larger and the handguard retainer being larger as well. Is that true to airsoft as well? I believe he's talking about airsoft and not real steel parts. Link to post Share on other sites
FW200 Posted October 18, 2010 Report Share Posted October 18, 2010 It is true for airsoft as well, Though I'm unsure about the first conversion kit models.. Anything can be modded offcourse, you can make a retainer or something to fit in the real one so it holds the lower properly. Link to post Share on other sites
validtumoralarm Posted October 18, 2010 Report Share Posted October 18, 2010 It is true for airsoft as well, Though I'm unsure about the first conversion kit models.. Anything can be modded offcourse, you can make a retainer or something to fit in the real one so it holds the lower properly. Yeah, I'm talking about the Ino/LCT spec stuff. Oh well, time to customize... Link to post Share on other sites
Zombie00 Posted October 18, 2010 Report Share Posted October 18, 2010 Say, I have a little question that someone around here might be able to ask. Is there anyway to change the pistol grip of the Type56-2? It looks kind of different, like in a different angle. Link to post Share on other sites
farfromahero Posted October 20, 2010 Report Share Posted October 20, 2010 FW200 is that artificial wear or just beat up? either way it looks awesome. Link to post Share on other sites
Kenworth W900 Posted October 20, 2010 Report Share Posted October 20, 2010 Say, I have a little question that someone around here might be able to ask. Is there anyway to change the pistol grip of the Type56-2? It looks kind of different, like in a different angle. Hey make sure you give me the grip if you do change it mate - I adore those grips. Just a shame that I'd have to buy a RS 56-2 to get one. Link to post Share on other sites
Zombie00 Posted October 20, 2010 Report Share Posted October 20, 2010 Hey make sure you give me the grip if you do change it mate - I adore those grips. Just a shame that I'd have to buy a RS 56-2 to get one. Have you tried contacting Real Sword? Link to post Share on other sites
adadqgg Posted October 21, 2010 Report Share Posted October 21, 2010 (edited) Aks-74N FINALLY!!! A picture that is taken CORRECTLY. I have seen so many ###### AK (ex: the brutally cut-down ones, ones fitted with SVD stocks, ones with capitalist suppressors) that my eyes almost started to bleed. Edited October 21, 2010 by adadqgg Link to post Share on other sites
PlasticMag Posted October 21, 2010 Report Share Posted October 21, 2010 DBoys RK01S -GHK GBB kit -Big Dragon complete bolt assembly -Russian Tula stock -Russian Tula upper handguard -Russian Tula pistol grip and bolt -Russian Tula gas tube -Russian AKSU sling -Bulgarian AK74 dimpled magazine catch and spring -Bulgarian AKSU rear sight pivot pin -Bulgarian AKSU handguard retainer pin and spring -LCT AKSU lower handguard -Refinished to match Tula parts -Systema tightbore I'd call it 90% done. The next one is going to use a Tula parts kit on a DBoys RK01S receiver with a steel barrel. Some detailed pictures follow. The stock attached. I modified a DBoys stock pin and cut the rear trunnion to fit the stock. A proof on the stock, you can see that I didn't modify the stock at all to fit. The magazine catch, no fitting required. Tula pistol grip, mold marking 2-2 upside down. Modified for the GHK kit, sadly. The bolt handle was re-profiled to fit the real AKSU bolt better. In addition to the other work, I modified the selector dimples to better reflect the real receivers. A learning process, and it's not 100% right, but it's a start. The upper and lower handguards, I vented the upper to match. Again, a learning experience. The gas tube also had to be modified to fit on the DBoys parts. The gas piston, visible with the upper handguard removed. Link to post Share on other sites
ST19AG_WGreymon Posted October 26, 2010 Report Share Posted October 26, 2010 Does anyone have any experience with this scope mount? http://www.ebairsoft.com/mtk83-20mm-mount-rail-p-1070.html Quality-wise how are they? Reviews don't help, they're 50/50. Link to post Share on other sites
PlasticMag Posted October 26, 2010 Report Share Posted October 26, 2010 Quality is mediocre (the locking mechanism is prone to breaking from the ones I've handled) but it gets the job done if you just mount it and be done. Link to post Share on other sites
PlasticMag Posted October 27, 2010 Report Share Posted October 27, 2010 Another project - another GBB AKSU! DBoys RK01S -Big Dragon Aluminum GBB kit -DBoys Polymer AKSU grips -TangoDown/USPalm AK grip Going to add a PBS1 and an EOTech. Link to post Share on other sites
Snigel Posted October 27, 2010 Report Share Posted October 27, 2010 Wow, that is nice! Link to post Share on other sites
DFM56 Posted October 27, 2010 Report Share Posted October 27, 2010 dat grip. Details? Link to post Share on other sites
PlasticMag Posted October 27, 2010 Report Share Posted October 27, 2010 Brand new, came out for real AKs. Because I'm using a GBB kit, I can use real grips. Had to modify the pistol grip mount but the grip is untouched. Like all TD grips, has waterproof storage inside. MSRP is around $35 I think. Link to post Share on other sites
grimmah Posted October 27, 2010 Report Share Posted October 27, 2010 Does anyone have any experience with this scope mount? http://www.ebairsoft.com/mtk83-20mm-mount-rail-p-1070.html Quality-wise how are they? Reviews don't help, they're 50/50. I bought one months ago, but back then the description said a shim plate is supposed to come with the scope mount, to fit all mount plates. Even the instructions said so. However it did not, and it would not fit the mounting plate on VFC guns, it rattles even with the screw being tightened so hard it bends the mount significantly. I contacted ebairsoft about it. He apologized for the wrong description, removed the "shim" part but left in that they fit VFC despite the fact i told him exactly which guns i had tried it on, the VFC AIMS, and the Krinkov PDW variants. As for the mount itself, it has a rather rough rail on it which wont let me fit chinese Larue type mounts, but the screw mounts on my G&P Aimpoint fits well on it. You could easily fit another more precise rail onto it however with some mods for the screws on that new rail. The build quality is ok but i dont think the black surface will stand up to too much nicks and scrapes. It may fit other ak's, i have no idea, but if you have the VFC brand, dont bother with it, unless you wanna make a shim for it yourself or source out a better fitting mounting plate. I got a store credit and was allowed to keep the mount, but still very disapointed. Hope this helps. Link to post Share on other sites
DFM56 Posted October 28, 2010 Report Share Posted October 28, 2010 Brand new, came out for real AKs. Because I'm using a GBB kit, I can use real grips. Had to modify the pistol grip mount but the grip is untouched. Like all TD grips, has waterproof storage inside. MSRP is around $35 I think. I'm actually looking for a grip for my saiga, where did you get yours? Link to post Share on other sites
frogfish Posted October 28, 2010 Report Share Posted October 28, 2010 (edited) -TangoDown/USPalm AK grip ..... http://www.uspalm.com/index.php?option=com_products&view=product&id=2 Edited October 28, 2010 by frogfish Link to post Share on other sites
Danke Posted October 28, 2010 Report Share Posted October 28, 2010 Anyone see something like these Krebs levers that will fit a VFC AK-74? Link to post Share on other sites
frogfish Posted October 28, 2010 Report Share Posted October 28, 2010 Have you checked WGC shop? The LCT stuff *should* fit, they used to have one in stock... don't know if they still do. Link to post Share on other sites
Danke Posted October 28, 2010 Report Share Posted October 28, 2010 A'ha, like this one. http://www.lctairsoft.com/pdc_parts/parts_pk33_OBW.htm The game is afoot! Link to post Share on other sites
frogfish Posted October 28, 2010 Report Share Posted October 28, 2010 (edited) More like this one.... http://www.wgcshop.com/wgc2008/main/product_detail1.php?search_From=searchItem&item=LCT-PK-78&search=special&rs=ak%20selector&catid=&cat= Again I don't know for certain if it will fit a VFC, I'm pretty sure it will, but I've only fitted some of their grips and body parts. Edited October 28, 2010 by frogfish Link to post Share on other sites
Scharf Posted October 28, 2010 Report Share Posted October 28, 2010 or just make your own like me and my friend made http://www.youtube.com/watch?v=rxu3whha4LI Link to post Share on other sites
grimmah Posted October 28, 2010 Report Share Posted October 28, 2010 Anyone see something like these Krebs levers that will fit a VFC AK-74? WGC told me the LCT and King Arms variants will fit, so i got the KA one, and i can confirm that it fits. I have it installed on my VFC AKS74U tacticool. Link to post Share on other sites
kingdong Posted October 29, 2010 Report Share Posted October 29, 2010 here`s my little beast not for the purists though lol VFC AKS 74U Link to post Share on other sites
Recommended Posts