aznriptide859 Posted May 25, 2011 Report Share Posted May 25, 2011 No I'm keeping the MRDS Quote Link to post Share on other sites
WhiteHawksan Posted May 25, 2011 Report Share Posted May 25, 2011 On a side note, does anyone know how to fix AK mag wobble? My Beta-P mags wobble like a mofo in this AK. it depends what type of body you ahve, if you have 4 screws in the magwell, find 2 dome headed screws (those from computer internal screws work well) and replace the front 2 screws (nearest the foregrip) with the dome headed screws and that will remove the mag wobble. if you don't have screws there, then.. some dense foam around the edge/front of the magwell to give it much better pressure against the mag catch? Hope that helps 1 Quote Link to post Share on other sites
bombermonk Posted May 26, 2011 Report Share Posted May 26, 2011 Cyma AKM with converted mag and real steel wood, just need lots of weathering on the body and change or modify the psitol grip. Quote Link to post Share on other sites
DarkLite Posted May 26, 2011 Report Share Posted May 26, 2011 Bombermonk, that is sexy as hell. Quote Link to post Share on other sites
skaos Posted May 26, 2011 Report Share Posted May 26, 2011 I ditched it in favor of a SAW grip. pics... On a side note, does anyone know how to fix AK mag wobble? My Beta-P mags wobble like a mofo in this AK. holy *suitcase* it's just awesome what kind of sight do you have? Quote Link to post Share on other sites
crackisbad Posted May 26, 2011 Report Share Posted May 26, 2011 eMRDS Quote Link to post Share on other sites
sigma3 Posted May 26, 2011 Report Share Posted May 26, 2011 bombermonk: real steel receiver cover? Quote Link to post Share on other sites
bombermonk Posted May 26, 2011 Report Share Posted May 26, 2011 Nope, normal cyma one, all metal is still original cyma ^^ real steel covers only fit on realsword anyway. Got a real steel gasblock here though that i'll prolly put on it after some modding Quote Link to post Share on other sites
DarkLite Posted May 26, 2011 Report Share Posted May 26, 2011 eMRDS Get a T-1 on there! Quote Link to post Share on other sites
Gumball Posted May 26, 2011 Report Share Posted May 26, 2011 Has anyone seen this stock adapter before? It looks like it might fit my Cyma AK104--then it's folding UBR time. +1 for this, anyone know? Quote Link to post Share on other sites
DFM56 Posted May 26, 2011 Report Share Posted May 26, 2011 On a side note, does anyone know how to fix AK mag wobble? My Beta-P mags wobble like a mofo in this AK. I'm pretty sure you can build up the area directly under the mag catch so the tang on the back of the mag will lock into the catch tightly. This should stop front to back wobble (my BP mag does the same thing, but I haven't tried to fix it as it doesn't feed worth a damn anyway). For side to side wobble I think you can build up the receiver walls inside the magwell (where the dimple is) so it's just slightly larger than the mag, but you run the risk of only being able to fit one type of mag into the magwell no matter what type of fitting you do. Hopefully I'll be fitting a bunch of G&P mids to my RPK tomorrow (magwell is insanely loose on it), I'll let you know what works for me. Quote Link to post Share on other sites
kojak Posted May 26, 2011 Report Share Posted May 26, 2011 +1 for this, anyone know? More photos from DEN Trinity: http://www.dentrinityshop.com/pr_details.jsp?pid=15979 Quote Link to post Share on other sites
DFM56 Posted May 26, 2011 Report Share Posted May 26, 2011 Are VFC folding stocks compatible with the new marui AK74? If they are that should fit with minor modification. Quote Link to post Share on other sites
aznriptide859 Posted May 26, 2011 Report Share Posted May 26, 2011 Get a T-1 on there! Don't worry that's on the to-do list, once I figure out what silencer combo I want on there. I'm pretty sure you can build up the area directly under the mag catch so the tang on the back of the mag will lock into the catch tightly. This should stop front to back wobble (my BP mag does the same thing, but I haven't tried to fix it as it doesn't feed worth a damn anyway). For side to side wobble I think you can build up the receiver walls inside the magwell (where the dimple is) so it's just slightly larger than the mag, but you run the risk of only being able to fit one type of mag into the magwell no matter what type of fitting you do. Hopefully I'll be fitting a bunch of G&P mids to my RPK tomorrow (magwell is insanely loose on it), I'll let you know what works for me. Thanks. Is the feeding the BP mag's problem or is it because it doesn't fit with the hopup well? Quote Link to post Share on other sites
Zombie00 Posted May 26, 2011 Report Share Posted May 26, 2011 Short madbull surefire would look awesome there. Quote Link to post Share on other sites
MrM60 Posted May 27, 2011 Report Share Posted May 27, 2011 my AIMS- Quote Link to post Share on other sites
DFM56 Posted May 27, 2011 Report Share Posted May 27, 2011 Don't worry that's on the to-do list, once I figure out what silencer combo I want on there. Thanks. Is the feeding the BP mag's problem or is it because it doesn't fit with the hopup well? I think mine might be the mag, I haven't been able to find a place where it will consistently feed. Quote Link to post Share on other sites
skaos Posted May 27, 2011 Report Share Posted May 27, 2011 More photos from DEN Trinity: http://www.dentrinityshop.com/pr_details.jsp?pid=15979 geez, it's look cool but freakin expensive, it's just a piece of metal... Quote Link to post Share on other sites
DFM56 Posted May 27, 2011 Report Share Posted May 27, 2011 (edited) ok, I fixed the mag wobble on my RPK. All I did was take a piece of brass shim stock (1"x2") and fold it in half to make a double-thick 1" square piece that won't fall apart. I gorilla glued it into the magwell. I found a nice little gap between the bottom corner of the receiver and the reinforcement plate, so I wedged it in there and folded it over so it's held tightly but still has a lot of contact with the sides of the mags. I don't think I'll need to mess with the mag catch at all, and if I need to make the magwell thinner I can just slip a piece of shim stock between the folded layers of the piece already in there. Went from wobble city to slightly looser than my real steel running modified polymer galil mags. Edited May 27, 2011 by DFM56 Quote Link to post Share on other sites
aznriptide859 Posted May 29, 2011 Report Share Posted May 29, 2011 Thanks for the info - I got some 16-gauge sheet metal I should be able to do the same. My front-back wobbling is worse than my side-side wobbling, but I guess one issue at a time. Quote Link to post Share on other sites
DFM56 Posted May 29, 2011 Report Share Posted May 29, 2011 You should be able to do something similar for that, just put the shim on the receiver where the tab on the back of the mag locks under the catch. Quote Link to post Share on other sites
validtumoralarm Posted May 29, 2011 Report Share Posted May 29, 2011 New CYMA AKM that I got from a buddy, needs some parts and a little work: With its big brother: Quote Link to post Share on other sites
GRIM! Posted May 29, 2011 Report Share Posted May 29, 2011 Havent been so active in airsoft since the local arena closed down but i bought a Atoz dragunov för about 40€ wich i had to fix up and now runs perfectly. Its plastic wood i did some work on so i looks more real untill i can afford real and also did some work on the metal to look more used and abused. Still needs a POSP. Here is before: And after: More here: http://grimnyberg.spotlife.se/category/vapen-och-utrustning/ (Swedish text) 1 Quote Link to post Share on other sites
bombermonk Posted June 1, 2011 Report Share Posted June 1, 2011 RS handguards and magazine 1 Quote Link to post Share on other sites
Lone_Bullet Posted June 2, 2011 Report Share Posted June 2, 2011 I love it! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.