101matt1 Posted October 22, 2007 Report Share Posted October 22, 2007 Better pictures to come tomorrow. Link to post Share on other sites
TheLair Posted October 23, 2007 Report Share Posted October 23, 2007 With you going for the whole FR thing now, just throw on a pair of Pachmayrs and change that trigger to a three hole Al. one and you'd be set. Link to post Share on other sites
msx361 Posted October 23, 2007 Report Share Posted October 23, 2007 Very nice. I just installed one in my TM 1911. Â I haven't had a chance to run it by the chrono yet but, shooting it, I not only notice an increased FPS but also an increase in consistency. Between the DB Custom 6.01's and the PDI 6.01's I would defiantly recommend the PDI. I guess this is mainly because Stainless steel looks better than brass. I also have a 9Ball 6.03 of this length and I hope to run a comparison with it soon too. Â I definately look forward to that! I nearly got two in my last HK order (1911 and m14) but i dont like buying things unless i have seen a few reviews. Â I nearly got a DB custom one too, i sent in the order form and then never heard anything back and he ignored all my follow up emails, im just glad i didnt pay him. Â Thanks for answering my question Link to post Share on other sites
hkssr20det Posted October 23, 2007 Report Share Posted October 23, 2007 New Altamont Detonics USA grips. Fit is a little iffy. Need to bevel the top and bottom of the grip screw holes. They are also a little bit long off the bottom of the frame. Â Â Link to post Share on other sites
junior Posted October 23, 2007 Report Share Posted October 23, 2007 Looks good. I hope the reason Prime hasn't released any more compact kits for WA's, is because their busy making kits for this gun.... Â Those grips would look sweet on a Silver gun. Â BTW my Ultra CDP II is all done (thanks to R.ocelot)...wanna trade?! Link to post Share on other sites
Romulus Posted October 23, 2007 Report Share Posted October 23, 2007 Nice touch. Â Even new grips do the Detonics a world of good. I can't wait to see it when its full metal. It may yet become a pretty gun. Link to post Share on other sites
hkssr20det Posted October 23, 2007 Report Share Posted October 23, 2007 BTW my Ultra CDP II is all done (thanks to R.ocelot)...wanna trade?! Â I'll take a straight swap....ha ha. I still have to send the barrel and hop up to Dwayne. Then work on the body situation. Yeah, it is going to look much better in silver. Link to post Share on other sites
Whitedingo Posted October 24, 2007 Report Share Posted October 24, 2007 W.A Shibuya Custom Works Striker pistol, after a few years in my possesion and many mods. Â Â Closeup of the newly stipled grip panels and the Pachmayr thumb guard. Link to post Share on other sites
Whitedingo Posted October 24, 2007 Report Share Posted October 24, 2007 (edited) Double Post! Â Might as well ad a closeup of my MGC Springfield Armory Govt. Combat Custom Ltd. Ed. Â Edited October 24, 2007 by Whitedingo Link to post Share on other sites
hkssr20det Posted October 24, 2007 Report Share Posted October 24, 2007 Long slide anyone: Â Link to post Share on other sites
Romulus Posted October 24, 2007 Report Share Posted October 24, 2007 Ha. Thats great. Do you have a TK spacer so that you can actually use it like that? Link to post Share on other sites
hkssr20det Posted October 24, 2007 Report Share Posted October 24, 2007 Eh, it is working OK as is, but I have the slide short stroked right now. Shoots almost what it does on the Hi Capa so I'm not the losing seal anywhere. I hid it in the pictures (some) but there is also the 1 inch gap between the dust cover and the closed portion of the slide. Link to post Share on other sites
junior Posted October 26, 2007 Report Share Posted October 26, 2007 Â Â USED: Wilson Combat Professional (SCW) Â Shoots like a champ Link to post Share on other sites
quiksilver6184 Posted October 26, 2007 Report Share Posted October 26, 2007 Did it damage the slide when you took off the orange tip, or is that holster wear? Link to post Share on other sites
junior Posted October 26, 2007 Report Share Posted October 26, 2007 I got it that way. I'm assuming its from a shotty orange tip removal. Link to post Share on other sites
Mathub Posted October 26, 2007 Report Share Posted October 26, 2007 Long wait, but finally came in. Â Â Â Â Link to post Share on other sites
jack10 Posted October 26, 2007 Report Share Posted October 26, 2007 are you trying to make up for something only joking that looks like one nice gun. is the weight spread out well or is it quite front heavy? Link to post Share on other sites
junior Posted October 26, 2007 Report Share Posted October 26, 2007 Nice Mathub. Â Speaking of longslide...Remember when Boomarms had the V16 metal kit, then 2 days later it disappeared. Was that a fluke or did it just sell out that fast? Â Link to post Share on other sites
Romulus Posted October 27, 2007 Report Share Posted October 27, 2007        I have added quite a few bits and pieces over the past few weeks but without a doubt the Pachmayr Grips, which I just stole off my RS Combat Commander did the most for it. So far this gun includes the following:  - TM 1911A1 - RS Pachmayr Grips - PDI 6.01mm Tightbore (112.5mm) - SD Loading Nozzle - SD Valve Blocker - SD Piston Head  Within a few weeks this will be getting set up with an MBK but I figured that I'd do up the internal stuff first. Guess I got a bit carried away with the pictures but I just like the subtle change from WWII to tactical that the grips give the gun. Only bad part of the whole deal is that my RS Colt looks really stupid with plastic TM grips . Link to post Share on other sites
msx361 Posted October 27, 2007 Report Share Posted October 27, 2007 Only one Mathub? You cant have just one hardballer! Link to post Share on other sites
davedawg123 Posted October 27, 2007 Report Share Posted October 27, 2007 Minor update to my Colt: Â Â Link to post Share on other sites
hkssr20det Posted October 27, 2007 Report Share Posted October 27, 2007 (edited) Nine Ball ambis? They look good. Â Edit: Oh yeah, what MSH is that? RS? Edited October 27, 2007 by hkssr20det Link to post Share on other sites
AliceHKfan Posted October 27, 2007 Report Share Posted October 27, 2007 the WA Hardballer looks awesome, but I perfer the MGC/WA finish better (think M1911/M92 Premium finish) shame the MGC ones read "AMI" Link to post Share on other sites
davedawg123 Posted October 27, 2007 Report Share Posted October 27, 2007 Nine Ball ambis? They look good. Edit: Oh yeah, what MSH is that? RS?  Thanks.  I modified stock airsoft ambi and MSH. Link to post Share on other sites
Mathub Posted October 27, 2007 Report Share Posted October 27, 2007 The harballer is very well balanced, like a normal 5 inch. It's not front heavy. Link to post Share on other sites
Recommended Posts