Billy210 Posted August 2, 2006 Report Share Posted August 2, 2006 Remove flash hider, undo the grub screw underneath foresight and knock out the two cross pins. Pull it off. Thanks, I tried it out and it worked. The pins just needed a little elbow grease and they came out fine. Link to post Share on other sites
Godofwar Posted August 2, 2006 Report Share Posted August 2, 2006 I had to post here again TM M16 VN w/ G&P full metal kit TM XM177E2 Link to post Share on other sites
nsitgahltker Posted August 2, 2006 Report Share Posted August 2, 2006 (edited) Edited August 2, 2006 by nsitgahltker Link to post Share on other sites
Tunershark Posted August 2, 2006 Report Share Posted August 2, 2006 your flashhider is ginormous otherwise, awsome gun Link to post Share on other sites
CapaciousZepher Posted August 2, 2006 Report Share Posted August 2, 2006 It's a noveske replica, and although it is big I think it looks awesome. I'm thinking of making one for my M4 as I can't justify shelling out $70+ for a flash-hider. Cheers! - CapaciousZepher Link to post Share on other sites
ash^ Posted August 2, 2006 Report Share Posted August 2, 2006 It' s the Proud replica, as say before, and it s just beautiful. Very heavy, 1.1 lbs... Link to post Share on other sites
guillom Posted August 3, 2006 Report Share Posted August 3, 2006 pas trop lourd pour une replique en carton but nice at all Link to post Share on other sites
tgrillo Posted August 3, 2006 Report Share Posted August 3, 2006 Nice paintjob Link to post Share on other sites
Belladonna Posted August 3, 2006 Report Share Posted August 3, 2006 vn mags over normal anyday... Link to post Share on other sites
phoenixkskg Posted August 3, 2006 Report Share Posted August 3, 2006 (edited) <{POST_SNAPBACK}> Very nice, G&P for sure, how are the internals? Edited August 3, 2006 by phoenixkskg Link to post Share on other sites
fuzeon123 Posted August 3, 2006 Report Share Posted August 3, 2006 (edited) Would you guys recommend the carbine more or the full length rifle more in the ca m15a4 category. I play in heavy woods and open fields, so how much of an accuracy advantage do your rifles have over your carbines? Edited August 3, 2006 by fuzeon123 Link to post Share on other sites
Tunershark Posted August 3, 2006 Report Share Posted August 3, 2006 Would you guys recommend the carbine more or the full length rifle more in the ca m15a4 category. I play in heavy woods and open fields, so how much of an accuracy advantage does your rifles have over your carbines? <{POST_SNAPBACK}> it all depends on personal preference, theres no difference between the two except the stocks, with a full stock you can hold a pretty nice size batt while with the sliding one youll have to hold a mini in the front, unless you get a Crane or PEQ etc etc Link to post Share on other sites
fuzeon123 Posted August 3, 2006 Report Share Posted August 3, 2006 it all depends on personal preference, theres no difference between the two except the stocks, with a full stock you can hold a pretty nice size batt while with the sliding one youll have to hold a mini in the front, unless you get a Crane or PEQ etc etc <{POST_SNAPBACK}> No i mean the long barrelled rifle (510mm) and the short barrelled carbine (363mm) Link to post Share on other sites
tgrillo Posted August 3, 2006 Report Share Posted August 3, 2006 maybe 10 feet of range. It depends on whether you like rushing and running around or trying to pick people off at a static position. Go with whichever you like the looks of better. Plus, the M4 can have an M16 length tightbore hidden in a silencer, so that is not of importance... Link to post Share on other sites
kryptik Posted August 3, 2006 Report Share Posted August 3, 2006 Very nice, G&P for sure, how are the internals? <{POST_SNAPBACK}> Now that I have finished modifying them, they are absolutely wonderful. I have to say though, many of the stock G&P parts are MORE than I could ever ask for: Great switch assembly already on 16AWG high strand wire. I never had to touch a thing running my 10.8v. The Piston and Piston heads are wonderful, piston has had close to 10k rounds with a 190%, still looks great, no shavings. Metal cylinder head, and a strangely designed cylinder which seems to work very well. Stock metal spring guide with spacer, nothing else is needed. And the gearbox and bearings work great, I also bought a set of replacement G&P bearings for $6 just in case of a blowout. Link to post Share on other sites
moutwtrng Posted August 3, 2006 Report Share Posted August 3, 2006 Finally finished my latest (and last!) configuration of my TM SR16 this is what it used to look like: DARK KNIGHTS SNIPER: http://www.arniesairsoft.co.uk/forums/inde...e=post&id=20271 http://www.arniesairsoft.co.uk/forums/inde...e=post&id=20270 http://www.arniesairsoft.co.uk/forums/inde...e=post&id=20269 http://www.arniesairsoft.co.uk/forums/inde...e=post&id=20268 youll see it a couple of pages back... and heres my newest config, presenting the... DARK KNIGHTS ASASSIN: and if I am not using the launcher, here is where it goes... my custom standalone launcher: Link to post Share on other sites
ViciousV10s Posted August 3, 2006 Report Share Posted August 3, 2006 (edited) thats hot Mout, i like it with the m203 attached did you sell your custom front end...I liked that a lot..I want it Edited August 3, 2006 by ViciousV10s Link to post Share on other sites
H&K Posted August 3, 2006 Report Share Posted August 3, 2006 Nice gun moutwtrng...quite a change from before. Do you prefer the shorter barrel? Just a quick question about the pistol grip. I assume its the G27 one? Would it be possible for a left hander to use it comfortably? or is it only suitable for right handers? cheers. H&K Link to post Share on other sites
sturgis Posted August 3, 2006 Report Share Posted August 3, 2006 Nice gun moutwtrng...quite a change from before. Do you prefer the shorter barrel? Just a quick question about the pistol grip. I assume its the G27 one? Would it be possible for a left hander to use it comfortably? or is it only suitable for right handers? cheers. H&K <{POST_SNAPBACK}> yeah, nice gun mout ! how was the fitting of the G27 grip on the G&P body (i assume it's the king arms one) as i heard of possible fitting problems on CA bodies.. Link to post Share on other sites
jordan2139 Posted August 3, 2006 Report Share Posted August 3, 2006 Hey great gun severyone, does anyone have a picture with a G&P TA31F ACOG? Link to post Share on other sites
moutwtrng Posted August 3, 2006 Report Share Posted August 3, 2006 thats hot Mout, i like it with the m203 attached did you sell your custom front end...I liked that a lot..I want it <{POST_SNAPBACK}> Yup! I actually tried to sell it over here at arnies but no one responded, I guess you have to have alot of rep points over here, So I went ahead and sold it at ebay where I have more rep points and still at 100% positive. But anyway sorry Vicious, if had only known cause Id rather sell it to someone who would appreciate it Nice gun moutwtrng...quite a change from before. Do you prefer the shorter barrel? Just a quick question about the pistol grip. I assume its the G27 one? Would it be possible for a left hander to use it comfortably? or is it only suitable for right handers? cheers. H&K <{POST_SNAPBACK}> Well its not that I prefer a shorter barrel, Its just that no matter how hard I tried to make it fire like my bolt action TYPE 96 sniper it was just one disappointment after another, put the best upgrade parts money can buy and still wont get the shot consistency and accuracy of my bolt action. So theres no point of keeping it on a sniper config if it cant perform like it. Yes it can accomodate both right and left handers and by far it is the most comfortable grip I have ever owned. yeah, nice gun mout ! how was the fitting of the G27 grip on the G&P body (i assume it's the king arms one) as i heard of possible fitting problems on CA bodies.. <{POST_SNAPBACK}> Thanks! By far it fits pretty well, the first time I put it on a G&P it fits flush with it and after I took it to a game it kinda moved a little bit down or I may have just missed it completely, a little bit of sanding will do the trick. As far as fitting it on a classic army body, I have no idea sorry! Thanks for all the positive comments everyone! Link to post Share on other sites
Deepeyes Posted August 4, 2006 Report Share Posted August 4, 2006 I just can't leave my gun alone, I always have to do something to it. So this is it in her latest incarnation . The 203 isn't mine, but i'm thinking i'm going to have to get one now... Link to post Share on other sites
Recommended Posts