5 to 1 Posted September 11, 2007 Report Share Posted September 11, 2007 Here is my new Esstac Bush Boar, pictures of my complete gear with first line will be up soon. Link to post Share on other sites
chillindrdude Posted September 11, 2007 Report Share Posted September 11, 2007 (edited) no one wants to see your superman t-shirt under your cammies. dunno what impression you are going for. i assume marines. i recommend some sort of armor carrier or vest underneath. PACA or IBA would look cool with the BOAR. i also recommend a dropleg holster and sidearm. the esstac Boar is a great piece of kit. you're off to a good start. Edited September 11, 2007 by chillindrdude Link to post Share on other sites
Sinner101GR Posted September 11, 2007 Report Share Posted September 11, 2007 dunno what impression you are going for. <{POST_SNAPBACK}> maybe he isnt...? Link to post Share on other sites
mgyz3 Posted September 11, 2007 Report Share Posted September 11, 2007 Finaly got myself a safariland. Link to post Share on other sites
5 to 1 Posted September 12, 2007 Report Share Posted September 12, 2007 Actually the shirt under my cammies is a shirt with blue lettering saying "When it abosultely, positively has to be destroyed over night" with a big yellow EGA in the center. I got it the same day and was really amped about it. At the time of the picture I wasnt going for a particular impression but with my enlistment in the Corps I really should do a Marine impression Yeah I think I'll try to get a hold of a PACA but funds are getting diverted away from airsoft right now . A Recon impression would be nice but I dont want have some half assed attempt and claim its Recon which is why I didnt say anything when I posted it but I felt it had a tinge or hint of it. I dont have a Specter drop leg but right now it houses a WE Dragon so I need to get a 1911 or something decent aswell. Thanks for the help! PS- I love my BOAR! Best damn chest rig ever!!! no one wants to see your superman t-shirt under your cammies. dunno what impression you are going for. i assume marines. i recommend some sort of armor carrier or vest underneath. PACA or IBA would look cool with the BOAR. i also recommend a dropleg holster and sidearm. the esstac Boar is a great piece of kit. you're off to a good start. <{POST_SNAPBACK}> Link to post Share on other sites
SHOWEN1976 Posted September 12, 2007 Report Share Posted September 12, 2007 2 flecktarn models Link to post Share on other sites
Architect Posted September 12, 2007 Report Share Posted September 12, 2007 Finaly got myself a safariland. That holster looks very familiar Link to post Share on other sites
tomster Posted September 12, 2007 Report Share Posted September 12, 2007 My Coyote Brown stuff Link to post Share on other sites
jonarthur Posted September 12, 2007 Report Share Posted September 12, 2007 dose the sofa have molle loops ? cant beat abit of cb.... Link to post Share on other sites
The Crunchy Bunny Posted September 12, 2007 Report Share Posted September 12, 2007 Here's a generic terrorist/ badguy loadout for a skirmish on friday. I much like the light kit, I can run much faster. Normally fingerless gloves will be used but all I could find are my Mechanix. And I know my shemag is put on wrong. Link to post Share on other sites
hendrix Posted September 13, 2007 Report Share Posted September 13, 2007 slap some meat on those bones, lol j/k looks good man, id keep the full fingered gloves and maybe add a black sweater for the cold. shemagh is fine just riding a little tilted. the gun looks awesome btw, might be the flash but it looks like its got some nice wear on the front. Link to post Share on other sites
The Crunchy Bunny Posted September 13, 2007 Report Share Posted September 13, 2007 Thanks alot for the nice comment. Yeah, It's hard putting on a shemag at 2:00 in the morning. And I'll wear a black sweater in the cold. Link to post Share on other sites
5 to 1 Posted September 13, 2007 Report Share Posted September 13, 2007 (edited) Better? Its a WIP The new gear is: TAG Molle belt (CB) HSGI suspenders (Khaki) TAG flexfit hat (Tan) and I added: Specter drop leg holster (coyote) alice belt (under the TAG belt held by the suspenders) Still need: Tan PACA TAG canteen covers Serpa if I dont really like having a drop leg Hair cut, its getting long by my standards. Maybe a high and tight when I get my recruiter to take me on base to buy a USMC Flag And comments or advice welcome Edited September 13, 2007 by 5 to 1 Link to post Share on other sites
Belladonna Posted September 13, 2007 Report Share Posted September 13, 2007 beginings of my new IDF impression. mostly for the look so far, but as i aquire the financial recources, issue kit just got on order: issue bdus and belt, dogtag ( hebrew and english) patrol boonie, issue od sling, foregrip cover grip, mag holder, and pistol lanyard. R Link to post Share on other sites
Azulsky Posted September 13, 2007 Report Share Posted September 13, 2007 Better? Its a WIP And comments or advice welcome <{POST_SNAPBACK}> Erm good for what you got, as more $$ comes in i would say camelbak, so you can ditch the canteens and i would move the dumper to where one of the canteens is, depending if you are doing cqb and moving through doorways, if you end up filling it up, then its annoying banging on things as you walk by. Link to post Share on other sites
5 to 1 Posted September 14, 2007 Report Share Posted September 14, 2007 Erm good for what you got, as more $$ comes in i would say camelbak, so you can ditch the canteens and i would move the dumper to where one of the canteens is, depending if you are doing cqb and moving through doorways, if you end up filling it up, then its annoying banging on things as you walk by. <{POST_SNAPBACK}> Yeah Im planning on getting a camelbak along with a couple nalgene bottles and covers from TAG. As for the dumper, Im keeping it right there beause I dont play on CQB fields and I dont like it flapping and bouncing when I run. Its defenitaley in its final stages and Im almost there just need the hydration problem fixed and a MICH then Im set. Thanks! Link to post Share on other sites
Azulsky Posted September 14, 2007 Report Share Posted September 14, 2007 Does anyone know the dimensions of the Warlord vest by HSGI. Ive heard they are pretty big but i wanted to see if anyone had firsthand experience. Is there a way you can just look at the number of molle loops on a vest and tell its dimensions roughly, been wondering this... Link to post Share on other sites
Vostok Posted September 14, 2007 Report Share Posted September 14, 2007 (edited) Does anyone know the dimensions of the Warlord vest by HSGI. Ive heard they are pretty big but i wanted to see if anyone had firsthand experience. Is there a way you can just look at the number of molle loops on a vest and tell its dimensions roughly, been wondering this... <{POST_SNAPBACK}> I've got one (V1 in OD) , I can get you the exact dimensions when I go home in about an hour and a half. Its not as big as it looks in the pictures, but still holds allot of stuff, if you want pictures from any specific angles I can do that too. About the molle loops, each little section is like an Inch wide isn't it? and the gaps between rows is about an inch. Edited September 14, 2007 by Vostok Link to post Share on other sites
Thorbard Posted September 14, 2007 Report Share Posted September 14, 2007 1.5" horizontal spacing, 1" vertical spacing I believe. Link to post Share on other sites
gonzo1 Posted September 14, 2007 Report Share Posted September 14, 2007 1.5" horizontal spacing, 1" vertical spacing I believe. <{POST_SNAPBACK}> Correct. Each horizontal row is spaced 1" apart, and each loop is 1.5" wide. Link to post Share on other sites
Vostok Posted September 14, 2007 Report Share Posted September 14, 2007 (edited) Correct. Each horizontal row is spaced 1" apart, and each loop is 1.5" wide. <{POST_SNAPBACK}> hey, I did get one of the two right Im just getting ready to leave my res, so I should be home in about 30 mins, so I can get those warlord pics/measurements up Edited September 14, 2007 by Vostok Link to post Share on other sites
Wulfgar Posted September 14, 2007 Report Share Posted September 14, 2007 tomster- what belt is that? The Eagle padded one? Link to post Share on other sites
tomster Posted September 14, 2007 Report Share Posted September 14, 2007 tomster- what belt is that? The Eagle padded one? <{POST_SNAPBACK}> The one on the left is a CSM Gear padded belt, the one on the right is an AITES molle belt. Link to post Share on other sites
Azulsky Posted September 14, 2007 Report Share Posted September 14, 2007 (edited) I've got one (V1 in OD) , I can get you the exact dimensions when I go home in about an hour and a half. Its not as big as it looks in the pictures, but still holds allot of stuff, if you want pictures from any specific angles I can do that too. About the molle loops, each little section is like an Inch wide isn't it? and the gaps between rows is about an inch. <{POST_SNAPBACK}> That would be awesome if you could take pictures, just do front, left/right, back if you can. Edited September 14, 2007 by Azulsky Link to post Share on other sites
Wulfgar Posted September 14, 2007 Report Share Posted September 14, 2007 (edited) The one on the left is a CSM Gear padded belt, the one on the right is an AITES molle belt. <{POST_SNAPBACK}> Thanks, Edited September 14, 2007 by Wulfgar Link to post Share on other sites
Recommended Posts