Parsley Posted July 7, 2008 Report Share Posted July 7, 2008 PFI smoke cap, MooCow on here had one on his AK and the effect is great, plus they work amazingly on pistols. http://uk.youtube.com/watch?v=BoXSuAT3p2Y Link to post Share on other sites
fal Posted July 7, 2008 Report Share Posted July 7, 2008 (edited) Do they actualy make muzzle report different on GBBs? I don't expect it to be suppress it but was just wondering it actualy changes the pitch of the sound. I have seen all the vids on youtube but none of them were really well captured to potray actual effect. (video taken from shooter point of view rather than side view or from muzzle view and indoor instead out door.) Edited July 7, 2008 by fal Link to post Share on other sites
Chevieblazer Posted July 8, 2008 Report Share Posted July 8, 2008 Meet Kim: Unfortunately, flash and stabilizer are connected on my camera, so if I switch off the flash, the stabilizer is also of. So you either get pictures without much detail because the flash flattens them or because my hand is too shaky Link to post Share on other sites
i_is_oli Posted July 8, 2008 Report Share Posted July 8, 2008 Nice kimber mate, I'd change the Tactical Illuminator though, it looks slightly large with the laser as well (if that is what it is), get a Surefire M3 ..or a replica. Link to post Share on other sites
masakarijoe Posted July 8, 2008 Report Share Posted July 8, 2008 i like that light. what brand kimber is that? id add gunner grips for the marsoc look thats what i plan on doing to a marui MEU when its out... just need a NOVA KIMBER MARSOC MBK -Joe Link to post Share on other sites
cfg123 Posted July 9, 2008 Report Share Posted July 9, 2008 where can i find a threaded barrel for my WA kimber warrior Link to post Share on other sites
Billy Bob the Sniper Posted July 9, 2008 Report Share Posted July 9, 2008 where can i find a threaded barrel for my WA kimber warrior i JUST bought one from Xfire. Link to post Share on other sites
cfg123 Posted July 9, 2008 Report Share Posted July 9, 2008 whats there site Link to post Share on other sites
Billy Bob the Sniper Posted July 9, 2008 Report Share Posted July 9, 2008 (edited) http://www.x-fire.org/j_armory/e.outer.html Edited July 9, 2008 by Billy Bob the Sniper Link to post Share on other sites
cfg123 Posted July 9, 2008 Report Share Posted July 9, 2008 ok thank you so much billy bob!! Link to post Share on other sites
themonkeyfromoutbreak Posted July 9, 2008 Report Share Posted July 9, 2008 Link to post Share on other sites
cortes_ Posted July 9, 2008 Report Share Posted July 9, 2008 KSC ? Is it full metal or plastic ? It looks like there's something between grips and frame... Link to post Share on other sites
themonkeyfromoutbreak Posted July 9, 2008 Report Share Posted July 9, 2008 KSC ? Is it full metal or plastic ? It looks like there's something between grips and frame... Yeah its KSC full metal. There is nothing between the grips and the pistol. Hopefully another photo can show it better. Link to post Share on other sites
NegativeCambre Posted July 10, 2008 Report Share Posted July 10, 2008 Very pretty... who makes the grips? Love the carving. Link to post Share on other sites
Chevieblazer Posted July 10, 2008 Report Share Posted July 10, 2008 @ Masakarijoe: I have the proud replica of the gunner grips, but it totally did not like the look of them on the Warrior. Maybe Pachmayrs or kimber diamond rubber grips would look good... @ themonkeyfromouterspace: those are some pretty sick grips, man! Link to post Share on other sites
themonkeyfromoutbreak Posted July 10, 2008 Report Share Posted July 10, 2008 Very pretty... who makes the grips? Love the carving. A lovely lady from California, her website is http://www.esmeralda.cc/ Link to post Share on other sites
themonkeyfromoutbreak Posted July 10, 2008 Report Share Posted July 10, 2008 @ themonkeyfromouterspace: those are some pretty sick grips, man! thankyou, however the name is themonkeyfromoutbreak Link to post Share on other sites
gunnermaniac Posted July 10, 2008 Report Share Posted July 10, 2008 Beautiful grips monkey! Link to post Share on other sites
rhyyke Posted July 10, 2008 Report Share Posted July 10, 2008 nice! love the grips! Link to post Share on other sites
RacingManiac Posted July 10, 2008 Report Share Posted July 10, 2008 After a slight hiatus and acquiring a US-based job and residence(thus freeing myself from the restriction of Canadian airsoft), I am moving forward with my 1911 project... So I just ordered the following items... Nova SFA kit http://www.redwolfairsoft.com/redwolf/airs...il?prodID=24362 Nova SFA beavertail http://www.redwolfairsoft.com/redwolf/airs...il?prodID=24354 Nova Wilson Extended Mag Release http://www.redwolfairsoft.com/redwolf/airs...il?prodID=24610 Guarder Springs http://www.redwolfairsoft.com/redwolf/airs...il?prodID=19145 From PDI(x-fire): Nash Comp http://www.x-fire.org/tm_m1911/e.comp_nash.html Delta Hammer http://www.x-fire.org/tm_m1911/e.hammer_delta.html Palsonite Sear http://www.x-fire.org/tm_m1911/e.sear_pal.html My plan is to refinish the Nova kit to be something close to this state(I know its kimber but I prefer the SFA style engraving): http://www.kimberamerica.com/pistols/eclip...ipse_custom_II/ including the side of the comp, and I am going to stick with my SD stainless barrel instead of the Nova aluminum one.... down the line when Marui MEU comes out I'll get its mag(with bumper) and I'll get the Nova SFA MSH with magwell: http://www.redwolfairsoft.com/redwolf/airs...il?prodID=24099 well...watch this space for update hopefully in a few weeks' time.... As a refresher my 1911 as it is now is in my album... Link to post Share on other sites
vengecore Posted July 11, 2008 Report Share Posted July 11, 2008 (edited) I'd like to introduce my latest project, MGS4 inspired WE Caspian Operator. It is essentially a WE TAC 1911. I modded KSC M1911A1 Grips to fit and installed a NineBall (CW) Threaded Barrel for the TM 1911. The Silencer, Which I admit isn't the perfect replica of the in-game model, is a CA Double Screw Silencer. I polished the hammer, Barrel and Spring bushings and the trigger. I tried to install several 3 hole style 1911 triggers. The WA and KSC M945 trigger didn't reset properly, so I just gave up until something better comes around. the OD Lower is 4 coats of Krylon Camo Green. I have retrofitted a WA Mag Well funnel to fit but the Mag's bumper is to shallow for proper use of the extended well. Xposted to Metal Gear Solid weapons and loadouts Edited July 11, 2008 by vengecore Link to post Share on other sites
renegadecow Posted July 11, 2008 Report Share Posted July 11, 2008 A lovely lady from California, her website is http://www.esmeralda.cc/ Man, I've just seen stuff in there that makes all my woodwork look like they came out the rear end of a dying horse. I'm buying myself some professional checkering and scroll tools pronto. Link to post Share on other sites
fal Posted July 11, 2008 Report Share Posted July 11, 2008 (edited) @vengecore Nice one. I owned WE 1911 tactical before but didn't know it can actualy turned decent with new paint job on the frame!! I hated that cheap and thick finish they applied to the frame. Like 10years old enamel paint job. How about PDI delta type hammer and (as you said) three hole trigger to complete the look? Maybe Nova magwell MSH as well? Koba makes three hole trigger btw if you didn't know. (So does nineball, Nova and PDI) Edited July 11, 2008 by fal Link to post Share on other sites
masakarijoe Posted July 11, 2008 Report Share Posted July 11, 2008 vengecore: very nice. i have a WE tac as well, using it as a MARSOC -joe Link to post Share on other sites
vengecore Posted July 11, 2008 Report Share Posted July 11, 2008 @vengecore Nice one. I owned WE 1911 tactical before but didn't know it can actualy turned decent with new paint job on the frame!! I hated that cheap and thick finish they applied to the frame. Like 10years old enamel paint job. How about PDI delta type hammer and (as you said) three hole trigger to complete the look? Maybe Nova magwell MSH as well? Koba makes three hole trigger btw if you didn't know. (So does nineball, Nova and PDI) Thanks, yeah the finish flakes off, at least it did on the muzzle from the stress of firing it with the silencer attached. its nothing Industrial strength Rustoleum couldnt fix. PDI TM 1911 parts are compatible with the WE? MY shop is a PDI distributor so I will have to get some of their stuff in. i was already eyeing this recoil set Link to post Share on other sites
Recommended Posts