RSP1 Posted August 5, 2008 Report Share Posted August 5, 2008 Quote Link to post Share on other sites
BigAl Posted August 6, 2008 Report Share Posted August 6, 2008 Nice gun, shame about the bodged optics. Quote Link to post Share on other sites
Wai Hoong Chan Posted August 6, 2008 Report Share Posted August 6, 2008 interesting... do you need both the red sights AND the RD? Quote Link to post Share on other sites
felix4536 Posted August 7, 2008 Report Share Posted August 7, 2008 lol no offense. Quote Link to post Share on other sites
Stealth1911. Posted August 7, 2008 Report Share Posted August 7, 2008 My last G19 The g19 i had before that: the g19 i had before the one i had above!: Glock 17 with caspian slide and a load of internal mods (ignore the gilded v12) and here you can see the 17 and my 18c and all the mags i had Quote Link to post Share on other sites
Romulus Posted August 8, 2008 Report Share Posted August 8, 2008 (edited) Ironically, after I spent so much time selling off all my KSC Glocks I just ended up with a boat load of them in a trade (3.5 guns). This is the first one and the only one that is fully tuned. This gun was actually built by Junior and seems really smooth. I am actually planning to sell it though since the KSC hop-up is so much worse than the my Steel TM's (I also dig steel). However, it is a fun piece to shot and for a normal side arm it is more than accurate enough. I snapped a few quick pictures of it since even though I'm not a fan of tan I think it looks quite sharp. I'm open to people giving me a good reason to hang onto this. Bits: KSC G17 Pro-Arms Tan Frame Guarder Reinforced Mag Catch Guarder Recoil Spring and Rod Hidakaya 150% Hammer Spring Shooters Design Part 10 (feed Ramp) Shooters Design Rocket Valve Shooters Design G17 Slide and Barrel Proud Plug Spring Proud Mag Base Custom High Flow Edited August 8, 2008 by Romulus Quote Link to post Share on other sites
kyonshi_chan Posted August 8, 2008 Report Share Posted August 8, 2008 i actually like the tan frame. looks quite nice. Quote Link to post Share on other sites
Romulus Posted August 8, 2008 Report Share Posted August 8, 2008 There is certainly nothing wrong with the Tan. I think that it mainly is a matter of preference. I would never ever want to have a gun with an OD frame either. My hope is that I can pass this piece along to someone who really appreciates the color (and how nicely the gun shoots). Quote Link to post Share on other sites
Jsres Posted August 8, 2008 Report Share Posted August 8, 2008 well it certainly looks nice...and if in combat you run out of bbs/gas you can always ask a team mate and they might have a spare mag? Quote Link to post Share on other sites
Romulus Posted August 9, 2008 Report Share Posted August 9, 2008 That's what I'll carry this for _________________ I recently decided that it would be nice to have some sort of KSC Glock in my collection. While I am a vocal hater of the KSC hop-up and have two fully tuned TM steel slided Glocks (17 & 26) my first gun was a KWA Glock 17 and the KSC name has so much airsoft history and is so popular that it seemed like I really ought to have one in my collection. As a compromise I decided that my KSC Glock would be one that TM didn't make so that I could say "geez, I sure wish that this had a TM hop-up". The 18C also was a good choice because it can fufill a skirmish role for me. In a word it is my Plan B, if something goes wrong using only pistols I can still have a moment of spray and prey. At bit of history of the gun. The upper on this gun is an old school KSC Glock 18C slide. It has deeply engraved trades and has been bead blasted to make it silver (I have never seen a factory one of these in silver). Frankly, I haven't seen many of these slides around anywhere which makes it extra special. This slide originally belonged to ViciousV10's and is featured in many of his Glock pictures. It was then sold onto Junior who also used it extensively. Finally, I got in from Junior in a trade and I now intend to hold on to it for quite some time. As far as my plans for the build what you see below is just the beginning. I intend to build this into a collectors piece but also use it for skirmishing. On the way already is an old school frame, more internal parts, and shortly a few RS parts. I also need to do some stuff like swap barrels, find an extended slide stop, etc. Lots of work to be done. Bits: Glock 18C Parts List KSC Glock 18C SD Floating Valve SD Feed Ramp SD "Glock" Mag Base Hidakaya Floating Valve Spring Guarder Recoil Spring Guarder Recoil Rod Guarder Hammer Spring PGC Hi Flow KSC Glock 18C Outer Barrel KSC Metal Slide (Engraved Trades/Beadblasted) If you have suggestions about how I can make this more unique I'd love to hear them. Quote Link to post Share on other sites
Laxplayer19x93 Posted August 9, 2008 Report Share Posted August 9, 2008 A bit off topic, but how do you make those patterns on the handle? Is there a site with tuts? Quote Link to post Share on other sites
whosloosin92 Posted August 9, 2008 Report Share Posted August 9, 2008 What real steel parts are you planning on getting for it? I need some ideas for my G26. Quote Link to post Share on other sites
Romulus Posted August 9, 2008 Report Share Posted August 9, 2008 A bit off topic, but how do you make those patterns on the handle? Is there a site with tuts? I'm not sure what you are talking about (or if you are talking to me). If you are let me know and I'll try to answer. What real steel parts are you planning on getting for it? I need some ideas for my G26. I just dropped on a Hogue grip (to cover up the lack of trades and make it com comfortable). I have an RS optic mount which I will throw on at some point just for fun. I am also planning to buy a clipdraw on of these days and it may spend some time on this gun. I need to get a RS enhanched mag catch so that this can run 50rd mags. I also may try a few other parts like an RS extended slide catch just for fun. The nice part about KSC is that you can fit more RS stuff then on TM's. I want to take advantage of that. Quote Link to post Share on other sites
Laxplayer19x93 Posted August 9, 2008 Report Share Posted August 9, 2008 I am talking about the patterns on whosloosin92's Glock and Stealth1911's Glock in his first picture. Quote Link to post Share on other sites
whosloosin92 Posted August 9, 2008 Report Share Posted August 9, 2008 Mine has a carbon fiber pattern on it. It came that way. The other glock was painted with what looks like a netting laid over it. Quote Link to post Share on other sites
BigAl Posted August 10, 2008 Report Share Posted August 10, 2008 The carbon fibre pattern will be dip coated. Quote Link to post Share on other sites
aznriptide859 Posted August 10, 2008 Report Share Posted August 10, 2008 Romulus, where'd you find such a beautiful G18C slide? Quote Link to post Share on other sites
ViciousV10s Posted August 10, 2008 Report Share Posted August 10, 2008 (edited) Romulus, where'd you find such a beautiful G18C slide? "At bit of history of the gun. The upper on this gun is an old school KSC Glock 18C slide. It has deeply engraved trades and has been bead blasted to make it silver (I have never seen a factory one of these in silver). Frankly, I haven't seen many of these slides around anywhere which makes it extra special. This slide originally belonged to ViciousV10's and is featured in many of his Glock pictures. It was then sold onto Junior who also used it extensively. Finally, I got in from Junior in a trade and I now intend to hold on to it for quite some time." FYI I also am the one who glass-bead finished the slide. Edited August 10, 2008 by ViciousV10s Quote Link to post Share on other sites
Romulus Posted August 11, 2008 Report Share Posted August 11, 2008 All good things Glock come from Vicious. As far as where to find another Old School 18C slide I really don't know what to tell you other than to look around the Used Forums. I just haven't seen many. Quote Link to post Share on other sites
aznriptide859 Posted August 11, 2008 Report Share Posted August 11, 2008 Well, I just sold one to Junior, but it's entirely black and actually caused me problems in my G18C...I just hope he can find a good use for it. Just wondering, any idea why KSC stopped making their old engraved slides and did the newer, less-realistic laser-etched slides? Quote Link to post Share on other sites
Roskov Posted August 12, 2008 Report Share Posted August 12, 2008 Someones glock beeing pointed at me last game Quote Link to post Share on other sites
QDRenegade Posted August 17, 2008 Report Share Posted August 17, 2008 (edited) Finally finished restoring this from its crappy state. KWA Glock G19 -Glock GTL21 -Replica G19 Slide -Dytac Night Sights Edited August 17, 2008 by QDRenegade Quote Link to post Share on other sites
The Thief Lord Posted August 17, 2008 Report Share Posted August 17, 2008 (edited) Very nice Renegade, really diggin' that Glock. Is the GTL21 the tac light? Not too familiar with it. If so, how much would that run me to buy one? Either way, nice gun. Edited August 17, 2008 by The Thief Lord Quote Link to post Share on other sites
QDRenegade Posted August 17, 2008 Report Share Posted August 17, 2008 (edited) Very nice Renegade, really diggin' that Glock. Is the GTL21 the tac light? Not too familiar with it. If so, how much would that run me to buy one? Either way, nice gun. Yessir. Listed on Glock's official site, the GTL has three different combos with dimming dimming variants. The GTL10/11 is a single lamp. The GTL21/22 (I have the 21) is the combo lamp and red visible laser. The GTL 51/52 is Lamp, laser, IR lamp, and IR laser. The setup is great since it uses ambidexterous roll switches to turn the light/laser (or both) on and off. I believe I picked mine up for a mere $160 but the only listing on ebay has it at $255. Looks like it'd run you $225 on cheaper than dirt as well as some other similar retailers. Dayum, didnt expect this thing to appreciate so much Its definately a step up between all the lasers I have. This and my Laser-Max Uni-Max are the best, but the Uni-Max also retails for about $150. Makes for a great low profile AEG laser though, I often forget its right by my hand! And thanks! I definately like the clean look of my GLock now. I decided that I'll never paint anything I can't replace for $10 since I dont have the equipment/attention span to do it right. That said, I think its in a complete stage. The following are links to photos of the GTL21. My photos dont really show it, so yeah... http://www.makosecurity.com/Merchant2/grap...0001/GTL21B.jpg http://www.makosecurity.com/Merchant2/grap...00001/GTL21.jpg http://teamglock.com/Merchant2/graphics/00...680%20large.jpg Cheers. Edited August 17, 2008 by QDRenegade Quote Link to post Share on other sites
The Thief Lord Posted August 17, 2008 Report Share Posted August 17, 2008 Thanks a bunch. I've got my eye on the IR version, sounds cool. Another thing to ask for in my stocking Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.