cfg123 Posted September 16, 2010 Report Share Posted September 16, 2010 Made a lightweight 330d hydro pouch today. Webbing is used on the sides instead of cordura for better durability. Quote Link to post Share on other sites
TheFull9 Posted September 17, 2010 Report Share Posted September 17, 2010 Nicely done mate. What rig is it you're running there? Looks a lot like the Blackhawk H-Harness but missing the central lower back section. Quote Link to post Share on other sites
binarypunisher Posted September 17, 2010 Report Share Posted September 17, 2010 Its the EI MLCS one. Quote Link to post Share on other sites
Crocodilo Posted September 24, 2010 Report Share Posted September 24, 2010 Not much needle work, but i'm using a vertical utility pouch to carry a 1,5L bladder. I also used the clamp from an old camelbak i had. Its great for hot days and it does not compromise the mobility at all. Quote Link to post Share on other sites
The Angry Boar Posted October 9, 2010 Report Share Posted October 9, 2010 (edited) So I figured I would make some more armor and I had a friend who is a very large boy. He could never find and thing he liked the fit of so I made him this.It is only about 90% finished. Edited October 9, 2010 by The Angry Boar Quote Link to post Share on other sites
The Angry Boar Posted October 10, 2010 Report Share Posted October 10, 2010 I uploaded doubles Quote Link to post Share on other sites
cosmomz Posted November 21, 2010 Report Share Posted November 21, 2010 I made leather holster and sheath for may Mantis knife and Beretta 93R Uploaded with ImageShack.us Uploaded with ImageShack.us 1 Quote Link to post Share on other sites
SuperJesus37 Posted November 24, 2010 Report Share Posted November 24, 2010 Need to angle the pockets and add velcro. Quote Link to post Share on other sites
bn_ Posted November 25, 2010 Report Share Posted November 25, 2010 *snip* Need to angle the pockets and add velcro. Pockets look like a good idea but I dunno about the velcro... just seems weird to see velcro on Tigerstripes :/ Quote Link to post Share on other sites
Murdoc Posted November 28, 2010 Report Share Posted November 28, 2010 Beacuse a repro WW2 gebirgsjager anorak is over 100USD, started to make a copy some time ago... Quote Link to post Share on other sites
Pkekyo-Nor Posted November 29, 2010 Report Share Posted November 29, 2010 Well, here's the best advice I can give: Draw detailed sketches of all your ideas, and don't be afraid to reiterating them Quote Link to post Share on other sites
Murdoc Posted December 1, 2010 Report Share Posted December 1, 2010 (edited) Make everything you want from paper. Stick it together with duck tape. If OK; cut it into "2D" and transfer it with chalk to stuff. While cutting out; leave about 1-2cms at the borders, if no fold back needed. If you need fold back: fold back+1-2cm. Then sew it temoprarily together with your hands, after it using a mashine. After finishing, you can cut down the extra stuff, where needed. Edited December 1, 2010 by Murdoc Quote Link to post Share on other sites
spoeni Posted December 3, 2010 Report Share Posted December 3, 2010 Thought I post it here as well: A bandoleer I made, the lower MOLLE square (on the right in the pic) is meant to ride just above the belt on your left side. All mil-spec (MIL-W-43668) CB webbing, ITW nexus hardware, 500d AOR2 Cordura on the front and 1000d CB cordura on the back. The whole bandoleer is padded with 4mm neoprene. There are still some blue chalk marks on it Need to rub them out... Murdoc: Your way is good for clothing, but for gear like pouches it's different. There's quite some things to concern when you want to do a quality piece of gear, e.gb. what kind of threat, fabric, webing, machine, stitch length, edge distances, to not leave any edges to fray, layer build-up and the list goes on. I'm not trying to put you down, I know that your way is good for clothing. I also use stapled paper models for new designs, just to get the feel of it and to see possible problems in the assembling process. The best way to learn it is still learning by doing and analysing other designs. You could also buy some cheap china-clones (ebairsoft comes to my mind..) and rip them apart to see how they are made. I even copy some pouches just to get a bit of practice and to use different techniques. Quote Link to post Share on other sites
neilgoth1974 Posted December 4, 2010 Report Share Posted December 4, 2010 Is there a guide to "tactical" needlework out there somewhere? I have that age old problem of having too many ideas and not a clue how to realize them. Maybe this site could help: http://www.diytactical.com Quote Link to post Share on other sites
Murdoc Posted December 4, 2010 Report Share Posted December 4, 2010 Murdoc: Your way is good for clothing, but for gear like pouches it's different. There's quite some things to concern when you want to do a quality piece of gear, e.gb. what kind of threat, fabric, webing, machine, stitch length, edge distances, to not leave any edges to fray, layer build-up and the list goes on. I'm not trying to put you down, I know that your way is good for clothing. I also use stapled paper models for new designs, just to get the feel of it and to see possible problems in the assembling process. Yes, but if you don't have lot of material; or don't want to take apart a 70 years old cloth, or webbing; or can't have a sample... I'll still advise to make paper or cheaper material test modells... If it has difficult form... Quote Link to post Share on other sites
spoeni Posted December 4, 2010 Report Share Posted December 4, 2010 (edited) Yes, but if you don't have lot of material; or don't want to take apart a 70 years old cloth, or webbing; or can't have a sample... I'll still advise to make paper or cheaper material test modells... If it has difficult form... I know, I said that I use paper models for every new pouch/thingie/whatnot! I'm just saying that doing a quality piece of gear will be a bit more complicated than drawing a pattern, adding 1-2 cm at the edge, cut out and sew. I use diytactical a lot, but please don't go there and ask newbie questions! The guys there do it for a living and real soldiers and won't take it kindly if some airsofters ask questions that were answered a hundred times before. I didn't have to ask a single question, you'll find everything there. And a lot is just experience (=try and error), I mean I just started this spring and already know quite a bit. But there is still a lot to learn. Another AOR2 pouch: a shingle for 20R, I use them for the small SIG mags. I like to add an additional row of webbing on the back, so you can attach it to a 2" belt. Edited December 4, 2010 by spoeni 2 Quote Link to post Share on other sites
Murdoc Posted December 31, 2010 Report Share Posted December 31, 2010 All finished, compared to original: white side: feldgrau side: And happy new year!!! 2 Quote Link to post Share on other sites
ERTrifleman Posted January 9, 2011 Report Share Posted January 9, 2011 Well I'm here again with some work that isn't exactly needlework, nor nearly impressive as what some of you guys are doing, but it's still custom to some extent. It's a ittle mod I just did to a Camelbak Bottle I received from my girlfriend for Christmas. Simple and effective. Camelbak better bottle Surgical Tubing Hydrastorm bite valve. Fits perfect in an MBITR pouch. 3 Quote Link to post Share on other sites
Ce4en Posted January 12, 2011 Report Share Posted January 12, 2011 Too fond of needlework Quote Link to post Share on other sites
Liquid_snake Posted January 13, 2011 Report Share Posted January 13, 2011 A very old pic of my now gone (sadly) US Woodland shirt: Quote Link to post Share on other sites
The Angry Boar Posted January 16, 2011 Report Share Posted January 16, 2011 So when you guys make a complete set of armour or of bdus or bhts, do you buy extra or what because the prices are atleast 12.50$ per Meter, and the vests I have made are atleast 9 meters? Quote Link to post Share on other sites
druid799 Posted February 1, 2011 Report Share Posted February 1, 2011 havent touched the sewing machine in mths but past two wks sudenly regained my interest ! kandahar "style" plate carrier and battle belt for my self , and Personal Body Armour for a mate . Quote Link to post Share on other sites
Mr. Jon Posted February 10, 2011 Report Share Posted February 10, 2011 cheap and cheerful slick chicken plate carrier. obviously its not going to take real world use, but it does what i need it to. 1 Quote Link to post Share on other sites
renegadecow Posted February 15, 2011 Report Share Posted February 15, 2011 I don't know about "tactical", but I sure did use needles to make this one. Hand stitched, fully lined leather holster and cartridge belt for my SAA. The original quick draw holster. 5 Quote Link to post Share on other sites
TerranCmdr Posted February 18, 2011 Report Share Posted February 18, 2011 Really nice work there. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.