Diemaco Posted June 14, 2005 Report Share Posted June 14, 2005 Exactly that's a RIS with plastic covers, not a metal hand guard but why not get the ICS RIS Link to post Share on other sites
woc Posted June 14, 2005 Report Share Posted June 14, 2005 Exactly that's a RIS with plastic covers, not a metal hand guard but why not get the ICS RIS <{POST_SNAPBACK}> oh i have look and i have not found one for ics. can you give me a link? And sorryfor my lack of terminology I had forgotten it was called a RIS Link to post Share on other sites
louisdo Posted June 14, 2005 Report Share Posted June 14, 2005 1) which p8 is this (KJ?) 2) why does the logo say HF? <{POST_SNAPBACK}> I think the p8 is just a usp and its made by the company UFC. Its says HF because they couldnt copy the hk trademarks. On a further note.. i believe both of those are springers. Link to post Share on other sites
Jedigreedo Posted June 15, 2005 Report Share Posted June 15, 2005 I think you're mixing up two companies. Theres UHC and HFC, hence the HF. Link to post Share on other sites
Smith Posted June 15, 2005 Report Share Posted June 15, 2005 Here's my TM FAMAS SV with a few upgrades I recently made Notice the dual mag clamp For those who say that by using the mag clamp, it gets in the way of your right hand, i say this: "I agree"...thats why I just turn one of the magazines upside down and the extra magazine always stays on the left side of the gun Link to post Share on other sites
Ledpocket Posted June 15, 2005 Report Share Posted June 15, 2005 I finished up a smaller mock silencer recently. Here it is on a couple guns: Link to post Share on other sites
Butter18c Posted June 15, 2005 Report Share Posted June 15, 2005 For the real steel m4 handguard, it is plastic. However, there is a metal heat shield inside it. I'd show you but its damn hard to take the handguards off real steel ones by yourself Link to post Share on other sites
Machineabuse Posted June 15, 2005 Report Share Posted June 15, 2005 G&P VSR mags are poorly mounded but work. all you need to do is take a modelling knife and carefully cut down the plastic around the bits that don't properly fit. Usual suspect is the indent for the mag catch that just needs lowering by half a millimeter more or less. Link to post Share on other sites
HaVoC Posted June 15, 2005 Report Share Posted June 15, 2005 (edited) Not currently working, but at least the slide and barrel fit now. I need to iron out a few teething troubles, and probably fit a new recoil spring, but it looks and feels lovely as is. The Gemtech 'Coyote Tan' lanyard is lovely, too Edited June 15, 2005 by HaVoC Link to post Share on other sites
donnie Posted June 15, 2005 Report Share Posted June 15, 2005 Not currently working, but at least the slide and barrel fit now. I need to iron out a few teething troubles, and probably fit a new recoil spring, but it looks and feels lovely as is. The Gemtech 'Coyote Tan' lanyard is lovely, too <{POST_SNAPBACK}> glad to see it coming together! Link to post Share on other sites
HaVoC Posted June 15, 2005 Report Share Posted June 15, 2005 Yeah, thanks again mate Link to post Share on other sites
futbolpunk Posted June 16, 2005 Report Share Posted June 16, 2005 (edited) My KWA M93R II (with metal slide and outter barrel) was tired of being called "secondary"... DON'T DO IT!! Edited June 16, 2005 by futbolpunk Link to post Share on other sites
Magsz Posted June 16, 2005 Report Share Posted June 16, 2005 Some of the CA m4 or M15 whatever comes already upgraded with the metal grip and laser/battery box attached to it........ <{POST_SNAPBACK}> You'd have to be an idiot to rest your hands on a real steel RIS without the protection of rail covers. Those freakin rails get pretty hot after a few mags. Link to post Share on other sites
phishphansj3151 Posted June 16, 2005 Report Share Posted June 16, 2005 My awesomeness. Its just about finished externaly, still a few internal parts needed. Totals about 900$-1000$ worth of ###### on this thing. Link to post Share on other sites
Magsz Posted June 16, 2005 Report Share Posted June 16, 2005 The scope and vertical foregrip cost you 700 dollars? Either that or you grossly overpaid for your internal parts. Can you give us a parts list phish? Link to post Share on other sites
phishphansj3151 Posted June 16, 2005 Report Share Posted June 16, 2005 Im including the gun lol All prices are w/ shipping ICS m4 300$ Star QD foregrip 50$ ICS RIS 110$ Guarder nb-13 110$ (damn WGC shipping prices) Cantilever mount (forgot brand, but a good one) 50$ M*** spring 15$ TMKN tightbore 40$ Piston, Piston head, Spring guide 45$ Systema Torque up 55$ mags, sling, and clamp Close to 100$ Replacement trigger switch 15$ Ya maybe a few things I missed but w/e...Im tired. Link to post Share on other sites
SilentSwift Posted June 16, 2005 Report Share Posted June 16, 2005 oh i have look and i have not found one for ics. can you give me a link? And sorryfor my lack of terminology I had forgotten it was called a RIS <{POST_SNAPBACK}> Well, I was fairly sure I had seen this somewhere for 75 bucks, but maybe I was wrong...Also, this is sorta confusing, it says it's for a "tactical m16 carbine" which I figure just means m4... anyway, http://www.airsoftgi.com/product_info.php?...9cf59f1d0a61c3e Link to post Share on other sites
donnie Posted June 16, 2005 Report Share Posted June 16, 2005 Im including the gun lol All prices are w/ shipping <{POST_SNAPBACK}> boasting about the spend on accessories but including the price of the gun.......and shipping! priceless Link to post Share on other sites
snip3r Posted June 16, 2005 Report Share Posted June 16, 2005 dont flame the silencer, is a work in progress! ill get some better pictures up at some point mp5a4 +CA 1x30 red dot on high mount Link to post Share on other sites
unimatrix001 Posted June 16, 2005 Report Share Posted June 16, 2005 (edited) For the real steel m4 handguard, it is plastic. However, there is a metal heat shield inside it. I'd show you but its damn hard to take the handguards off real steel ones by yourself <{POST_SNAPBACK}> Let me help you: Comparison between M4A1 and G36K Pre-production model Without a special Handguard tool it's nearly impossible to remove the Handguards from a real AR15. Edited June 16, 2005 by unimatrix001 Link to post Share on other sites
FarEast Posted June 16, 2005 Report Share Posted June 16, 2005 Ok here is part of my armoury....... And yes I am aware the G3 SAS is a fictitious weapon, but it has a special place in my heart as my 1st AEG. The M4 nows has a M4 Grenade launcher on it and other upgrades and add ons. Got a few others but haven't taken photos yet. Link to post Share on other sites
phishphansj3151 Posted June 16, 2005 Report Share Posted June 16, 2005 (edited) boasting about the spend on accessories but including the price of the gun.......and shipping! priceless <{POST_SNAPBACK}> Haha, I meant when I said 900-1000$ worth of s*** spent, I wasnt just talking about accessories, what I meant is I've spent 900-1000$ including the gun lol. I'm a very bad typer and I make mistakes like that often and need people tofind my mistakes...Ha! Edited June 16, 2005 by phishphansj3151 Link to post Share on other sites
JJBennett Posted June 16, 2005 Report Share Posted June 16, 2005 Ok here is part of my armoury....... And yes I am aware the G3 SAS is a fictitious weapon, but it has a special place in my heart as my 1st AEG. The M4 nows has a M4 Grenade launcher on it and other upgrades and add ons. Got a few others but haven't taken photos yet. <{POST_SNAPBACK}> I love the way those pictures are ordered. Nice load out man. Link to post Share on other sites
Unlimited Ammo Posted June 16, 2005 Report Share Posted June 16, 2005 ejust realised i've never actually posted any pics of my guns, oh well here you go not much but hey cheers Link to post Share on other sites
Recommended Posts