blobface Posted December 12, 2017 Report Share Posted December 12, 2017 (edited) A quick update of my RWA full steel GRP 1911 with a prototype I'm working on, it fits over KJW CO2 magazine and retains with the original pin, this was a rough print I did which I sprayed black, will get the final version in better plastic from Shapeways. Thinking about making a version that increases BB capacity (by securing the pad on either side with grub screws instead of a pin all the way through), might require a new spring though. In any case, will probably put the different versions up on sale on Shapeways.. think I might get in trouble if I leave the logo on there though if it's for sale, should probably take it off. Edited December 12, 2017 by blobface 5 Quote Link to post Share on other sites
mrsevenstars Posted December 12, 2017 Report Share Posted December 12, 2017 Nice, i was hoping for something like this. Although i had always thought someone would make it just sleeve over the tm long mags. Quote Link to post Share on other sites
blobface Posted December 12, 2017 Report Share Posted December 12, 2017 Real steel ones work over TM long mags already I think, just had to make this one up for CO2. Quote Link to post Share on other sites
mrsevenstars Posted December 12, 2017 Report Share Posted December 12, 2017 They do?? I didnt know that. Im gonna have to find a DIY. Quote Link to post Share on other sites
hotelkilo Posted December 14, 2017 Report Share Posted December 14, 2017 (edited) managed to find a more suitable 1911a1 to use with the stock, as i suspected it wont fit inside the stock so i will have to consider permanently altering the stock to make it work as a holster with the full length 1911a1 Edited December 14, 2017 by hotelkilo Quote Link to post Share on other sites
Wingman Posted December 14, 2017 Report Share Posted December 14, 2017 Which 1911A1 is it? Quote Link to post Share on other sites
hotelkilo Posted December 14, 2017 Report Share Posted December 14, 2017 (edited) a TM with wood grips, i just swapped the MSH out Edited December 14, 2017 by hotelkilo Quote Link to post Share on other sites
NonEx Posted January 22, 2018 Report Share Posted January 22, 2018 (edited) AW Custom (Armorer Works Custom) Springfield V10 compact in silver http://www.armorerworks.com/airsoft/guns/pistols/ne-series/ne1001.html $109 USD from KY Airsoft: https://www.kyairsoft.com/shop/product/ne1001-sv-46834?category=609 Always wanted a V10 GBB pistol but the only ones out before this one was plastic Western Arms ones, and metal kits for that (mucho dollars) and then some custom high-end steel kits for like $1000-$1500 USD... This fits me perfectly Some first impressions here: http://arniesairsoft.co.uk/forums/index.php?/topic/217425-aw-custom-1911v10-compact-gbb-pistol-d/page-3&do=findComment&comment=2780622 Nikon D600 DSRL pics Edited January 22, 2018 by NonEx Quote Link to post Share on other sites
icolater Posted January 23, 2018 Report Share Posted January 23, 2018 Nice Nonex!! I'm hoping run in workshop will do a traded version at some stage. Looks very decent though. Any chance of an internal picture of the rails, bbu etc please. Quote Link to post Share on other sites
NonEx Posted January 23, 2018 Report Share Posted January 23, 2018 Dangit, everyone is talking about trademarks and real Hogue grips... When I ordered this I was like "Nah, I am fine with no trademarks." and now everyone is triggering my OCD about it Quote Link to post Share on other sites
hitmanNo2 Posted January 23, 2018 Report Share Posted January 23, 2018 You know you want to. Quote Link to post Share on other sites
Dj_komodo Posted January 23, 2018 Report Share Posted January 23, 2018 Tell me that this doesn’t look good sorry nonex... From CRW RS Quote Link to post Share on other sites
NonEx Posted January 23, 2018 Report Share Posted January 23, 2018 (edited) Nice Nonex!! I'm hoping run in workshop will do a traded version at some stage. Looks very decent though. Any chance of an internal picture of the rails, bbu etc please. I added some more pics here: http://arniesairsoft.co.uk/forums/index.php?/topic/217425-aw-custom-1911v10-compact-gbb-pistol-d/page-3&do=findComment&comment=2780633 You know you want to. DIC PIC Well of course I want to, you damn turd! I am trying to tell myself that I can do without! Tell me that this doesn’t look good sorry nonex... From CRW MEH PIC RS YEAIH! PIC Well, no, I actually don't think it looks good. The base finish of the pistol out of the box is so-so, so when you add so-so markings, as in the CRW picture, it makes it look worse. Also IMO the RS markings are pretty non-descript so I feel like it can kind of get away without them. *trying to convince myself* If I were to have it with markings it would have to be by RIW and custom finished afterwards but I don't think it's worth it. Just now seeing the subtle bi-tone of the RS one (very sexhya!) and the hex screws.... hurrr durrr... Maybe if I sand down the paint/finish on those parts it will look kinda like that? Might be worth a try Why are you doing this to me? Edited January 23, 2018 by NonEx Quote Link to post Share on other sites
hitmanNo2 Posted January 23, 2018 Report Share Posted January 23, 2018 What you could do it have it bead blasted to take off all the paint. Then get it engraved. Then polish the flats with some fine wet n dry on a piece of glass. Then some kind of clear sealant spray. Though that's a lot of effort for a $100 gun heh. Quote Link to post Share on other sites
icolater Posted January 23, 2018 Report Share Posted January 23, 2018 It looks great without trades TBH, nice and clean looking. Quote Link to post Share on other sites
NonEx Posted January 23, 2018 Report Share Posted January 23, 2018 Yes that could be one way to get it pimped out a bit but like you say, a lot of work and money to spend to refinish a $100 USD pistol. Depending on how much I like it I might look into asking Run In Workshop for a custom one Haha, thanks icolater, trying to help save me from myself 1 Quote Link to post Share on other sites
wolfgeorge Posted February 4, 2018 Report Share Posted February 4, 2018 Kimber Raptorsfull steel FPR and brass Prime Wolf Quote Link to post Share on other sites
Gunnman Posted February 18, 2018 Report Share Posted February 18, 2018 A quick update of my RWA full steel GRP 1911 with a prototype I'm working on, it fits over KJW CO2 magazine and retains with the original pin, this was a rough print I did which I sprayed black, will get the final version in better plastic from Shapeways. Thinking about making a version that increases BB capacity (by securing the pad on either side with grub screws instead of a pin all the way through), might require a new spring though. In any case, will probably put the different versions up on sale on Shapeways.. think I might get in trouble if I leave the logo on there though if it's for sale, should probably take it off. Where did you get the heinie slant pro for the 1911? Quote Link to post Share on other sites
wolfgeorge Posted February 21, 2018 Report Share Posted February 21, 2018 Prime Springfield 1911 Tommy FranksWolf 1 Quote Link to post Share on other sites
icolater Posted February 22, 2018 Report Share Posted February 22, 2018 Lovely guns wolf!! 1 Quote Link to post Share on other sites
SpecialWeaponsAndPlastic Posted February 24, 2018 Report Share Posted February 24, 2018 I was playing around with Fusion360 and my 3d-printer and came up with this little beauty: So I began to wonder if there is any general interest among airsofters for a Hyman S. Lebman-style compensator, even though it's 3d-printed? If not, I'll just keep it as a nice touch for my future project. Quote Link to post Share on other sites
volante Posted March 2, 2018 Report Share Posted March 2, 2018 I have tried bluing on some parts of my steel 1911 Barrel Chamber bluing done wrong but i think this uneven colors are not look so bad. Trigger And extractor. I purchased industrial oven for the whole kit bluing. I'll upload its picture when it is done. 4 Quote Link to post Share on other sites
wolfgeorge Posted March 2, 2018 Report Share Posted March 2, 2018 (edited) ... Edited March 2, 2018 by wolfgeorge Quote Link to post Share on other sites
wolfgeorge Posted March 2, 2018 Report Share Posted March 2, 2018 I like it man.. Looks nice. Wolf Quote Link to post Share on other sites
GRIM! Posted March 10, 2018 Report Share Posted March 10, 2018 Pimped my 1911 narco style. Dont klick here for more pics! 4 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.