somegirls Posted June 6, 2009 Report Share Posted June 6, 2009 You know your rails well thanks mate, looks pretty sweet! Quote Link to post Share on other sites
1st Commando Posted June 6, 2009 Report Share Posted June 6, 2009 I know those shops, yes.. "Tactical Quatermaster" hasn't updated the shop for a long time now,.. airsoft-one.be has no WE parts/M4 anymore and sniperairguns.. who know when they'll have those stuff.. TS One is dead/non existent anymore and I don't really trust AB after this bolt carrier story.. ..so I guess there is actually no shop here in EU with those stuff in stock right now.. I know TQM is just waiting for more stock to be delivered as I spoke to him yesterday Quote Link to post Share on other sites
chris u'5 Posted June 6, 2009 Report Share Posted June 6, 2009 I know TQM is just waiting for more stock to be delivered as I spoke to him yesterday I can confirm this. I was told the the new inner barrels and hop up rubbers should be with him in a week or so. Plus you can contact him directly for any spare parts you require and these can be added to his order apparently. I've ordered from Mark before and I will be buying a new inner from him plus some spare parts he has ordered for me. He is highly recommended Quote Link to post Share on other sites
alexishere2008 Posted June 6, 2009 Report Share Posted June 6, 2009 my outer barrel extension is going through some horrible rusting. Now I'm down to the 10 inch barrel btw how many mags do you guys run? Quote Link to post Share on other sites
AKRay Posted June 6, 2009 Report Share Posted June 6, 2009 Totally should've waited until the CQBR was released, as I needed a 10" ish barrel for this to work properly (along with an accurate upper receiver, but I doubt we'll see one of those any time soon), but here's my WIP. And yes, I'm well aware of the discrepancies, and that godawful orange flash hider (it'll have to do until the CW-CCW thread adaptor arrives). and the front sight may well be on backwards.... soooo much fun to shoot, though. That's a VFC HK416 front end, it took a lot of work to fit, but damn, it looks nice. No, I didn't sacrifice the VFC, it belonged to someone else, and it had an unfortunate accident rendering it unusable. I'd love to have a proper upper receiver for it and/or full receiver (hint, hint) Quote Link to post Share on other sites
aidan mc Posted June 7, 2009 Report Share Posted June 7, 2009 (edited) here's mine, bit of a plain jane compared to some of you guys. got a R.I.S soming from AB's this week. running 9 magz Edited June 7, 2009 by aidan mc Quote Link to post Share on other sites
briklebritt Posted June 7, 2009 Report Share Posted June 7, 2009 Does anybody own the new Co2 magazines and the Co2-kit from Airsoft buddy? is there a review or a comparison between gas and co2-version? Quote Link to post Share on other sites
L4byr1nth Posted June 7, 2009 Report Share Posted June 7, 2009 Hey guys, is there an easy way to tell between a Gen. 1 M4 and a Gen. 2 (with the tightbore, enhanced HOP, and steel parts) just by looking at it? Ben. Quote Link to post Share on other sites
Marky [UE] Posted June 7, 2009 Report Share Posted June 7, 2009 (edited) Hey guys, is there an easy way to tell between a Gen. 1 M4 and a Gen. 2 (with the tightbore, enhanced HOP, and steel parts) just by looking at it? Ben. There are actually more than 2 "revisions". A good start would be to read the Wiki article on Rifle Versions. Edited June 7, 2009 by Marky [UE] Quote Link to post Share on other sites
L4byr1nth Posted June 7, 2009 Report Share Posted June 7, 2009 Thanks for the link! It's very informative. I didn't realise there were so many different updates. Cheers! Ben. Quote Link to post Share on other sites
leejinwen Posted June 7, 2009 Report Share Posted June 7, 2009 Heres mine Quote Link to post Share on other sites
somegirls Posted June 7, 2009 Report Share Posted June 7, 2009 nicely issued!! Does anyone have the DD clone from EB on his/her gun? http://ebaybanned.com/product_info.php?cPa...roducts_id=1898 does it fit as well as the socom gear? Quote Link to post Share on other sites
accuracy Posted June 7, 2009 Report Share Posted June 7, 2009 nicely issued!! Does anyone have the DD clone from EB on his/her gun? http://ebaybanned.com/product_info.php?cPa...roducts_id=1898 does it fit as well as the socom gear? i have one that looks exactly like that except that one has two extra screws.i got mine from rsov though. it sucks. it dones't go on straight and has gap between thing and receiver even with RS barrel nut. I had to use orings to make it straight. Quote Link to post Share on other sites
somegirls Posted June 7, 2009 Report Share Posted June 7, 2009 well, that's pretty convincing. Guess I'll stick to my king arms than. Quote Link to post Share on other sites
accuracy Posted June 7, 2009 Report Share Posted June 7, 2009 well, that's pretty convincing. Guess I'll stick to my king arms than. yep you're welcome, one of the biggest waste of 65 dollars i've ever spent. Quote Link to post Share on other sites
somegirls Posted June 7, 2009 Report Share Posted June 7, 2009 (edited) even more surprising that the socom gear ras seems to fit just fine. e: is it this one you got? http://www.dragonredairsoft.com/airsoft/vi...productID=26500 Edited June 7, 2009 by somegirls Quote Link to post Share on other sites
WETTI Posted June 7, 2009 Report Share Posted June 7, 2009 I know those shops, yes.. "Tactical Quatermaster" hasn't updated the shop for a long time now,.. airsoft-one.be has no WE parts/M4 anymore and sniperairguns.. who know when they'll have those stuff.. TS One is dead/non existent anymore and I don't really trust AB after this bolt carrier story.. ..so I guess there is actually no shop here in EU with those stuff in stock right now.. Ha...that is SOOOOOOO far from the truth, my friend We now have authorized sole distributorship in France & Germany, Austria, Switzerland, Andorra, Monaco, Belgium, Luxembourg, Spain & Russia. Three authorized dealers in UK, one in Poland, one in Czech Republic, & more are coming very soon. I'll update our list (on our website) in the next couple days. Pls kindly check, thanks!! Quote Link to post Share on other sites
Eliminator Posted June 7, 2009 Report Share Posted June 7, 2009 In France? What shop? Beside this, you got a PM Wetti Quote Link to post Share on other sites
Carsten Posted June 7, 2009 Report Share Posted June 7, 2009 (edited) We now have authorized sole distributorship in France & Germany, Austria, Switzerland, Andorra, Monaco, Belgium, Luxembourg, Spain & Russia. Three authorized dealers in UK, one in Poland, one in Czech Republic, & more are coming very soon Yes, I'm sure thats true but I never said that there is "no shop at all" here in Europe... I asked for a shop who can deliver the CO2 kit / mags "at once" and is trustworthy.. so I'd appreciate if you can tell me one of your distributors who match both criteria.. ( ok, to be fair, a shop here in EU with the co2 stuff in stock is enough,.. I don't want you to tag one of your distributors "untrustworthy" ) Edited June 7, 2009 by Carsten Quote Link to post Share on other sites
WETTI Posted June 7, 2009 Report Share Posted June 7, 2009 (edited) Yes, I'm sure thats true but I never said that there is "no shop at all" here in Europe... I asked for a shop who can deliver the CO2 kit / mags "at once" and is trustworthy.. so I'd appreciate if you can tell me one of your distributors who match both criteria.. ( ok, to be fair, a shop here in EU with the co2 stuff in stock is enough,.. I don't want you to tag one of your distributors "untrustworthy" ) Pls kindly understand that with the launched of the SCAR, many of my authorized dealers are holding their orders to consolidate with their current orders, thus creating a vacuum of sort with regards to spare parts (which incl. the CO2 conversion kit & the mags). With what I'm about to announce in the news section, this situation should be rectified shortly. Edited June 7, 2009 by WETTI Quote Link to post Share on other sites
3vi1-D4n Posted June 7, 2009 Report Share Posted June 7, 2009 Just a question: I am looking at a lightweight bolt for the WE because the bolt cycling is a tad slow. Its gone down to around 9*C here now, and the cycling slow. I know that there WAS a lightweight bolt at AB but it is no longer there. Is it still available? Quote Link to post Share on other sites
WETTI Posted June 7, 2009 Report Share Posted June 7, 2009 Just a question: I am looking at a lightweight bolt for the WE because the bolt cycling is a tad slow. Its gone down to around 9*C here now, and the cycling slow. I know that there WAS a lightweight bolt at AB but it is no longer there. Is it still available? Unfortunately the CNC aluminum bolt is not available any more. To cope with the colder environment, I do suggest that you should try our CO2 system. Quote Link to post Share on other sites
WETTI Posted June 7, 2009 Report Share Posted June 7, 2009 Please check news section for some pretty good news today.... Quote Link to post Share on other sites
Nazio Posted June 7, 2009 Report Share Posted June 7, 2009 I've tried to find out which one is Your official dealer in Poland WETTI. My guess was specshop but they did not respond to my e-mail. If You can enlight would be perfect Quote Link to post Share on other sites
julietcharlie Posted June 7, 2009 Report Share Posted June 7, 2009 That's great news, I have a question, WETTI is the valve included in the SCAR the new CO2 version or a regular gas version. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.