Blackweell! Posted December 25, 2011 Report Share Posted December 25, 2011 Thanks for that, that's what I'm using just now but doesn't feel right. Any recommendations on good 2-point sling setups? Quote Link to post Share on other sites
MovementUnderDarkness Posted December 25, 2011 Report Share Posted December 25, 2011 Thanks for that, that's what I'm using just now but doesn't feel right. Any recommendations on good 2-point sling setups? I've seen the Magpul RSA and MS3 used.. or another sling with the Paracord rear setup. OR a Plethora of TangoDown attachments Quote Link to post Share on other sites
Mr Teatameh Posted December 25, 2011 Report Share Posted December 25, 2011 On my SSR I'm using a Guarder 3 Point Tactical Sling http://www.wgcshop.com/wgc2008/main/product_detail1.php?search_From=category&item=GD-CG-S02BK&search=category&rs=Slings&catid=4&cat=111 (attached at the front most and rear receiver points). Once I'd finally got some help on how to use the thing, it works well and I'm able to carry the weapon slung and once in contact unclip the sliding buckle to go to an almost single point config (not that I do reaction side transitions with the SSR in the DMR role). I use keyrings on all my SCARs on the sling points, but have (with a fair bit of patience and struggle) put a decent quality electrical heatshrink on them, which deadens noise and stops them shining. The sling points are a bit of an achilles heel on the SCARs IMHO as whilst there are loads of them, they are too small for most slings clasps/carabinas. Quote Link to post Share on other sites
Danke Posted December 25, 2011 Report Share Posted December 25, 2011 Sling, http://www.blueforcegear.com/products/Vickers-Combat-Applications-Sling%E2%84%A2.html http://www.blueforcegear.com/products/Blue-Force-Gear%C2%AE-Universal-Wire-Loop%E2%84%A2.html Quote Link to post Share on other sites
Shift Posted December 25, 2011 Report Share Posted December 25, 2011 By the way, how exactly is it that you mod a Magpul 20 LR Pmag to fit in a VFC SCAR H? I heard it's only a little filing down of the mag catch area in the mag. Can anyone confirm this? Thanks. Quote Link to post Share on other sites
pkm200901 Posted December 26, 2011 Report Share Posted December 26, 2011 that's correct. Quote Link to post Share on other sites
mrcheetos Posted December 26, 2011 Report Share Posted December 26, 2011 The mag catch + the ridge on the back of the mag (or the spine inside of the magwell, but I'd rather dremel a $26 magazine than a $100+ gun) Halestorm from airsoft canada did a great job with his. Quote Link to post Share on other sites
frogfish Posted December 29, 2011 Report Share Posted December 29, 2011 In response to slings I second a BFG vickers sling, just make sure it's the padded version. I'm also making my own version of the S&S sling with 1.5" webbing and will let you know how that works as so far the S&S sling works great except that it's thin and digs into my shoulder. Quote Link to post Share on other sites
validtumoralarm Posted January 4, 2012 Report Share Posted January 4, 2012 Picked up a VFC EGLM today. I'm working on the orange tip, just evaluating potential strategies at this point. As far as a sling, I use an SKD PIG Drop-Slider single point. the HK hook attachment works with the sling mount, but just barely. Quote Link to post Share on other sites
Interficium Posted January 4, 2012 Report Share Posted January 4, 2012 Picked up a VFC EGLM today. I'm working on the orange tip, just evaluating potential strategies at this point Where did you purchase that at? I just ordered the same from evike and I'll be irritated if it comes with that gigantic orange tip. Quote Link to post Share on other sites
validtumoralarm Posted January 4, 2012 Report Share Posted January 4, 2012 Stryke Airsoft's walk-in store. I went there because they offered me a pretty good deal. I haven't quite figured out if the orange is painted on or if it's a cap that I can remove. I'm hesitant to attack it until I've made that distinction. Quote Link to post Share on other sites
spetsnazdave87 Posted January 4, 2012 Report Share Posted January 4, 2012 IT'S SO BEAUTIFUL!!!! Shame I'm gonna muddy it up and beat the *suitcase* out of it... Quote Link to post Share on other sites
mightyjebus Posted January 4, 2012 Report Share Posted January 4, 2012 VFC Scar H counter-sniper Quote Link to post Share on other sites
bladerunner168 Posted January 4, 2012 Report Share Posted January 4, 2012 Nice pair.....of VFC SCAR-H gents Mighty, what LLM is that? Quote Link to post Share on other sites
mightyjebus Posted January 4, 2012 Report Share Posted January 4, 2012 it's a vital 2 but I can't remember who makes it. it's one of the better quality ones out there and oh stay well clear of the new VFC LLM as it's completely pants. I'm awaiting an element one and hopefully it's better than the VFC one. just googled the vital 2 and it's made by hurricane. Quote Link to post Share on other sites
Blackweell! Posted January 4, 2012 Report Share Posted January 4, 2012 Where is everyone getting these 7.62-H suppressors?! Quote Link to post Share on other sites
mightyjebus Posted January 4, 2012 Report Share Posted January 4, 2012 WGCSHOP is where i got mine. Quote Link to post Share on other sites
Blackweell! Posted January 4, 2012 Report Share Posted January 4, 2012 They've been out of stock for donkeys Quote Link to post Share on other sites
spetsnazdave87 Posted January 4, 2012 Report Share Posted January 4, 2012 I got mine with it. Quote Link to post Share on other sites
Pdubyuh Posted January 5, 2012 Report Share Posted January 5, 2012 (edited) Heres Mine VFC the gold bling is now scorched earth brown http://www.flickr.com/photos/69857817@N03/?saved=1 sorry for the link rather than a pic I'm trying to be sneaky at work... Edited January 5, 2012 by Pdubyuh Quote Link to post Share on other sites
Katotaka Posted January 6, 2012 Report Share Posted January 6, 2012 D-Boys Scar-H Picked this up as an early christmas present before it went out of stock on ASGI. (Got the base aeg for $130!) Anyone have experience with the Magpul aftermarket selector switch? I'm really disliking the one on this, I feel like I'm going to break it off every time I disengage the safety. Cool, how did you manage to use PMAG 20 LR in SCAR ? Was there a rib inside the magwell like VFC's SCAR-H and is now removed? Quote Link to post Share on other sites
mrcheetos Posted January 7, 2012 Report Share Posted January 7, 2012 I dremeled off half the rib on the back of the pmag. An example of this is shown a page earlier. The rib inside the magwell is still present. Quote Link to post Share on other sites
Mr Teatameh Posted January 20, 2012 Report Share Posted January 20, 2012 Hi all, Here's a new pic of the SCAR SSR with a few changes: Visible: T1 instead of the previous red dot - easier to acquire and less transition time from the specter Zenith Ergo grip chopped and shaped to fit and more closely match the RS pics from Shot Show a year or two back Magpul selectors Butler Creeks on the Specter Not so visible: The receiver and gearbox are new and semi auto only at ~445fps - means I can switch out for the ~340fps receiver dependant on site rules/operating mode. O-rings on the bipod articulation bolts/pins to tighten it up and deaden noise To do: MOSFET - the semi-auto only box really needs this I feel as I am getting the occasional lock-up when the cycle finishes in the wrong place - will probably go for one of the AWS trigger block replacement types due to the space restrictions (if anyone ever stocks the thing again ). This rifle is pretty much how I want it now apart from a fixed sniper stock - I am getting a CNC machine sometime this year so unless I find one on the market somewhere I'll probably make my own. Oh and accuracy - using the semi-auto box and 0.25 and 0.28's I was hitting a head sized target at the far end of my local range (45 metres) about 80% of the time in light wind. I have also skirmished the ~340fps setup and whilst that was doing a little better than my SCAR-L, the only major advantage was keeping peoples heads down if they saw me pointing in their direction Quote Link to post Share on other sites
Interficium Posted January 20, 2012 Report Share Posted January 20, 2012 forgot to post this in here. Quote Link to post Share on other sites
Njnewland Posted January 21, 2012 Report Share Posted January 21, 2012 My G&G scar... Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.