Hvy gear Posted December 8, 2005 Report Share Posted December 8, 2005 (edited) Dont buy the g&g ones as they cause the slide to not cycle properly, your best bet would be to get the gaurder g17/18 threaded barrel, it's sticks out a bit but with a silencer on it's pretty much unnoticable. the g&g ss-100 silencers are perfect for the g17/18 barrel. Edited December 8, 2005 by Hvy gear Link to post Share on other sites
tommylifely Posted December 8, 2005 Report Share Posted December 8, 2005 oh really so the 17/18 will actualy fit? i read somewhere it wouldnt. and yes the ss-100 was the silencer i was looking at. Link to post Share on other sites
Hvy gear Posted December 8, 2005 Report Share Posted December 8, 2005 Yes, the length is longer so it protrudes a little but not much, others on this forum have done the same, have a look through the glock pictures thread and see. cheers. Link to post Share on other sites
Krazy L Posted December 8, 2005 Report Share Posted December 8, 2005 all three of my G&G barrels work fine. USPc, G26, G18c (sold it) Link to post Share on other sites
Hvy gear Posted December 8, 2005 Report Share Posted December 8, 2005 (edited) The 19 barrel seems to be the odd one out, many have had problems with it. Edited December 8, 2005 by Hvy gear Link to post Share on other sites
tommylifely Posted December 8, 2005 Report Share Posted December 8, 2005 okay guess ill be ordering 2 17/18 barrels and 2 ss-100 silencers tomorrow am then! -- just read, someone said they are not the same as the 19 on the chamber end? will they require any modification or just go straight on? Link to post Share on other sites
ViciousV10s Posted December 9, 2005 Report Share Posted December 9, 2005 Dont buy the g&g ones as they cause the slide to not cycle properly, your best bet would be to get the gaurder g17/18 threaded barrel, it's sticks out a bit but with a silencer on it's pretty much unnoticable. the g&g ss-100 silencers are perfect for the g17/18 barrel. <{POST_SNAPBACK}> I dont know if youve ever actually tried that, I would think not since it doesnt work. The chamber end of KSC/KWA Glock outer barrels vary with the gun size models. They are not compatible in smaller models. The G34 outer barrel works in a 17/18C because they use the same style frame. A 17 barrel does not fit in a 19 or 26, and a 19 barrel doesn not fit in a 26. But hey what do I know about Glocks... Link to post Share on other sites
5thElement Posted December 9, 2005 Author Report Share Posted December 9, 2005 Vicious - Is that MGC Glock 18 an airsoft gun or PFC gun? Link to post Share on other sites
ViciousV10s Posted December 9, 2005 Report Share Posted December 9, 2005 Vicious - Is that MGC Glock 18 an airsoft gun or PFC gun? <{POST_SNAPBACK}> Airsoft GBB. Link to post Share on other sites
PV_Golf Posted December 9, 2005 Report Share Posted December 9, 2005 Anyone got any pictures of Glocks (Doesn't matter which model) that have different accessories on them? Light the mag holder on the front rail, lights, and a scope? Or something along those lines? My friend is giong to be "accessorizing" his Glock and we need inspiration... Link to post Share on other sites
Hvy gear Posted December 9, 2005 Report Share Posted December 9, 2005 Hero, you need a threaded outer barrel for your Glock. The outer barrels for the 18 and 19 are not the same design on the chamber end. Guarder makes CW and CCW 14mm threaded barrels for the 18, and G&G also makes a 14mm CW threaded barrel for the 18. G&G makes a 14mm CW barrel for the 19 DENtrinity used to have Shooter's Design CW and CCW 14mm barrels but have not been in stock for a while now I have only seen 14mm threaded barrels that are either CW or CCW, if you want to use that silencer you have you would most likely need a custom made 16mm threaded barrel made. Good luck. PS> G&G barrels do not cycle well, even with plastic slides. You are best off getting a Guarder threaded barrel for the 18 and buy that G&G SS100 silencer. The barrel is about 40 USD and the G&GSS100 is about 25 USD. THe G&G SS100 and SS80 silencers are very good quality especially for the low cost. They even have foam inserts, I own a few. <{POST_SNAPBACK}> I'm not the only one . Link to post Share on other sites
tommylifely Posted December 10, 2005 Report Share Posted December 10, 2005 can anyone please confirm if the 17/18 barrel WILL or WILL NOT fit the 19? Link to post Share on other sites
the sniper Posted December 10, 2005 Report Share Posted December 10, 2005 It will not fit without modification but I have heard of it being done Link to post Share on other sites
ViciousV10s Posted December 10, 2005 Report Share Posted December 10, 2005 Note the areas circled in red, make them the same and itll work... Link to post Share on other sites
tommylifely Posted December 10, 2005 Report Share Posted December 10, 2005 thats gonna be a mission an a half Link to post Share on other sites
Hvy gear Posted December 10, 2005 Report Share Posted December 10, 2005 (edited) They look identical to me. the 17 barrel is the one your after then. Edit: it might be worth you contacting the guy in this thread whos done it for advice. Edited December 10, 2005 by Hvy gear Link to post Share on other sites
ViciousV10s Posted December 10, 2005 Report Share Posted December 10, 2005 They look identical to me. the 17 barrel is the one your after then. Edit: it might be worth you contacting the guy in this thread whos done it for advice. <{POST_SNAPBACK}> They look identical to you??? Here's a clue on how to tell the difference, count the number of right angles. Link to post Share on other sites
tommylifely Posted December 10, 2005 Report Share Posted December 10, 2005 ok filing it down would have been near impossible. the barrels seem to be made out of some incredibly hard metal. i gave up in the end and got the power tools. Cut the thread off the end and glued on to the 19 barrel. Not too happy realy. Looks *beep* and will probably break straight away Link to post Share on other sites
Krazy L Posted December 18, 2005 Report Share Posted December 18, 2005 my new KSC glock 26 Link to post Share on other sites
tom_clancy84 Posted December 19, 2005 Report Share Posted December 19, 2005 (edited) My KJW G27. i guess the new batch have Glock's trademarking removed. Edited December 19, 2005 by tom_clancy84 Link to post Share on other sites
Guest Posted December 25, 2005 Report Share Posted December 25, 2005 Got a King Arms M3 and a case for my G17 today Both a really good quality, i'm pleased with them Link to post Share on other sites
Raven_shield Posted December 25, 2005 Report Share Posted December 25, 2005 I love it. Link to post Share on other sites
Skull Posted December 25, 2005 Report Share Posted December 25, 2005 Voála.... my G17L wannabe realsteal G17 v.1.9. Better pic coming. Link to post Share on other sites
Tunershark Posted December 25, 2005 Report Share Posted December 25, 2005 looks like you put it through the washing machine about 3 times then flushed it down the toilet, then retreived it from the sewer and took that picture no offense Link to post Share on other sites
BigAl Posted December 25, 2005 Report Share Posted December 25, 2005 Skull why do you say 17L it has a standard length slide? What make is it or did you mod the frame? Link to post Share on other sites
Recommended Posts