KUNFUCHOPSTICKS Posted February 27, 2007 Report Share Posted February 27, 2007 holy moly that blue shells stands out. wow nice photos. Link to post Share on other sites
trfo2o Posted February 27, 2007 Report Share Posted February 27, 2007 I don't think there really is a "correct" way to put on the suppressor. <{POST_SNAPBACK}> yes there is, with the KAC suppressors the QD latch always faces upwards. Link to post Share on other sites
hendrix Posted February 27, 2007 Report Share Posted February 27, 2007 silencer goes on either way but the flashider(to function correctly) needs to be in the upward position. it is more ideal though to have it on upwards(the latch) as it makes it easier to take off. Link to post Share on other sites
preventer Posted February 27, 2007 Report Share Posted February 27, 2007 wow very very nice stuff. Good choice on the VFC silencer too, I believe you have it upside down though. Does your silencer spin freely when you have it locked on? <{POST_SNAPBACK}> Ow really? I thought the latch had to face down... But you're absolutely right! I checked it on the KAC webbie kitlist anyone? -G&P M4A1 -G&P Knight's 600m flip-up replica -G&P Vertical foregrip -CA RIS -Phantom flashhider -EOTech 512 -Magpul railpanel -Star L PEQ2 -Surefire M900A -Surefire M962XM07 met FM16 Blue filter -WA M1911A1 Gov't model -BHI Lanyard -WA Kimber Marine SOC -Surefire X200 -MS2000 strobe -G&P M4 CQB/R -Surefire M900A -VFC KAC QD 2006 silencer -Knight's replica 600m flip up rear sight -G&P aimpoint replica -KSC MK23 met MK23 SOCOM silencer Link to post Share on other sites
AUDIOBANDIT Posted February 27, 2007 Report Share Posted February 27, 2007 my ics anniversary Link to post Share on other sites
Cons Posted February 27, 2007 Report Share Posted February 27, 2007 My ICS M4 Para (anerversery) Link to post Share on other sites
no1rc3ur Posted February 27, 2007 Report Share Posted February 27, 2007 it looks so front heavy. Link to post Share on other sites
Cons Posted February 27, 2007 Report Share Posted February 27, 2007 A bit, but i find it fine Link to post Share on other sites
Souske Posted February 27, 2007 Report Share Posted February 27, 2007 (edited) Special Forces carbine I'm thinking of getting some form of ACOG. Edited February 27, 2007 by Souske Link to post Share on other sites
The Crunchy Bunny Posted February 27, 2007 Report Share Posted February 27, 2007 Dude Souske, your rifles are always awsome. Good Job! Link to post Share on other sites
thomasw Posted February 27, 2007 Report Share Posted February 27, 2007 Very very nice. I like the RIS, and all the dummy tied stuff on it. What kind of mag's do you use? That one looks metal, but Ive never really seen any airsoft mags like that, and that wear that good. Link to post Share on other sites
Souske Posted February 27, 2007 Report Share Posted February 27, 2007 The Crunchy Bunny, thomasw, thanks for the comments! thomasw, the magazine was my original TM lowcap that came with the carbine. It's almost 3 years old, and it's been used over and over again...so there was no magic on how it ended up looking like that, lol. Link to post Share on other sites
thomasw Posted February 28, 2007 Report Share Posted February 28, 2007 So is it a metal magazine? I wish there were some good manufacturers of metal m4 magazines out there. Link to post Share on other sites
Rob15 Posted February 28, 2007 Report Share Posted February 28, 2007 So is it a metal magazine? I wish there were some good manufacturers of metal m4 magazines out there. <{POST_SNAPBACK}> TM, ICS, CA? Link to post Share on other sites
0nslaught Posted February 28, 2007 Report Share Posted February 28, 2007 audiobandit, whats that sticking out of your ICS RAS? it looks like a PBS-4 Link to post Share on other sites
Souske Posted February 28, 2007 Report Share Posted February 28, 2007 So is it a metal magazine? I wish there were some good manufacturers of metal m4 magazines out there. <{POST_SNAPBACK}> Plastic magazines didn't start coming out until STAR started with their cheap Lowcaps. Ever since then, there has been a few brands with plastic magazines, but most AR mags out there are aluminum. Link to post Share on other sites
thomasw Posted February 28, 2007 Report Share Posted February 28, 2007 Ah, I haven't seen any mid/low caps that are metal. Highcaps = lame paintsoft. Link to post Share on other sites
CapaciousZepher Posted February 28, 2007 Report Share Posted February 28, 2007 (edited) "Highcaps = lame paintsoft" QFT and sigged. Nice gun Souske. Never know what I'm going to see when you post as it's always changing Cheers! - CapaciousZepher Edited February 28, 2007 by CapaciousZepher Link to post Share on other sites
Souske Posted February 28, 2007 Report Share Posted February 28, 2007 Haha, thanks Zepher. I only occasionally post when something gets changed. thomasw, before the 30rounder lo-caps by STAR, all Low-midcap magazines were metal. Link to post Share on other sites
Skarclaw Posted February 28, 2007 Report Share Posted February 28, 2007 Ah, I haven't seen any mid/low caps that are metal. Highcaps = lame paintsoft. <{POST_SNAPBACK}> CA do them, UnCo have them. Link to post Share on other sites
StarMonkee Posted February 28, 2007 Report Share Posted February 28, 2007 Ah, I haven't seen any mid/low caps that are metal. Highcaps = lame paintsoft. <{POST_SNAPBACK}> G&P do some very sexy metal M4 mid caps. When my M4 is back from being repaired will get some pics taken of it Link to post Share on other sites
Fizzy Posted February 28, 2007 Report Share Posted February 28, 2007 G&P do some very sexy metal M4 mid caps. When my M4 is back from being repaired will get some pics taken of it <{POST_SNAPBACK}> Although many people have complained about feed issues with them. Link to post Share on other sites
Kipper Posted February 28, 2007 Report Share Posted February 28, 2007 The old ones used one spring, the new one uses two. Solved the back pressure on the BB problem. If you find theyre not feeding, try pushing them up into the magwell. If they feed then you need to bend the piece of metal above the hole cut in the mag. This will enable it to lock in better. Mine feed perfect now. Link to post Share on other sites
PariahWolf Posted February 28, 2007 Report Share Posted February 28, 2007 The old ones used one spring, the new one uses two. Solved the back pressure on the BB problem. If you find theyre not feeding, try pushing them up into the magwell. If they feed then you need to bend the piece of metal above the hole cut in the mag. This will enable it to lock in better. Mine feed perfect now. <{POST_SNAPBACK}> This man speaks the truth Link to post Share on other sites
Fizzy Posted February 28, 2007 Report Share Posted February 28, 2007 The old ones used one spring, the new one uses two. Solved the back pressure on the BB problem. If you find theyre not feeding, try pushing them up into the magwell. If they feed then you need to bend the piece of metal above the hole cut in the mag. This will enable it to lock in better. Mine feed perfect now. <{POST_SNAPBACK}> That's not the problem, it's the BB follower jamming. Link to post Share on other sites
Recommended Posts