Psychosis Posted June 26, 2007 Report Share Posted June 26, 2007 Where did you get those covers? I, at the very least, like them. Link to post Share on other sites
GuzziHero Posted June 26, 2007 Report Share Posted June 26, 2007 I got mine from Deben Optics in the UK. Heres one place to try for them in the US: http://www.outdoorsuperstore.com/product.a...low+Scope+Cover Remember to measure the OUTSIDE of the scope for the diameter, dont just take the lens size Link to post Share on other sites
ACE of SPADES11 Posted June 27, 2007 Report Share Posted June 27, 2007 Well, I have re-vamped my M4 and added a little something special to my ICS M16A3. I hope you enjoy: The M16A3: BTW, the M4's tightbore is going to be replaced with one that fits. The 16 will be getting a tightbore, maybe when I get the M4 one. I'm building another M4 that I'm going to paint for my BHD Delta look. Ok, here are the specs of the M4. It started off as a TM SR-16 then the following were added: Classic Army Gen II Metal Body (I have the handle, not shown) King Arms CQB-R Front End Kit (RAS, flip up FS, vert grip, outer barrel) Rubber Stock butt plate (unknown brand) G&P Suppressor King Arms 7L Red Dot Aimpoint Replica 9.6 3000 MaH NiMH Battery w/ Dean's, wired to rear (Crane stock soon) Internals: TM Gearbox G&G Gears KM Tightbore (about to be replaced with CQB size Systema tightbore) Systema Piston KN Piston head G&P metal hopup Unknown spring (shooting about 370-380) The ICS M16A3 is stock (shooting 335 fps w/ 8.4 3300 MaH NiMH) with a JBU barrel extension/suppressor attached and a Simmons scope. I have a nice Nikon scope too, but I use that on my .300 Savage. The M4 I am going to build will have a M120 Systema drop-in mechbox, the KN tightbore currently in my gun, a CA one piece outer barrel, standard M4 handguards, the JBU barrel extension/suppressor, the M4 stock on my current M4 (once I get a crane stock), a CA Gen II metal body I acquired through trade, a CA 1 piece metal hopup with Systema bucking, and I still have to firgure a few things out (like, um, the motor, perhaps? lol). Link to post Share on other sites
tom lawson Posted June 27, 2007 Report Share Posted June 27, 2007 why dont you just dremel or hacksaw down the m4 inner barrel? a lot cheaper than getting a whole new barrel? Link to post Share on other sites
justjoe Posted June 27, 2007 Report Share Posted June 27, 2007 Thats what i did with my old CA barrel, worked a treat and saved me £40! Link to post Share on other sites
ACE of SPADES11 Posted June 27, 2007 Report Share Posted June 27, 2007 why dont you just dremel or hacksaw down the m4 inner barrel? a lot cheaper than getting a whole new barrel? <{POST_SNAPBACK}> If you read at the bottom of my post, I am building an M4 and using the current tightbore in my CQBr in the project M4. Why hack down the current tightbore then buy a new M4 length one? Link to post Share on other sites
tom lawson Posted June 27, 2007 Report Share Posted June 27, 2007 heh, i didnt take time to read your post, and as i was replying i thought "hes probably gonna use the one that is too long..." My bad Link to post Share on other sites
alyaspogi Posted June 27, 2007 Report Share Posted June 27, 2007 just wanna share(CA CQB) Link to post Share on other sites
oddxbird Posted June 28, 2007 Report Share Posted June 28, 2007 My sr15 Magpul rifle. Link to post Share on other sites
Victory Posted June 28, 2007 Report Share Posted June 28, 2007 Wowzer...imaginary +1! -Vic Link to post Share on other sites
MERCILESSPIT Posted June 28, 2007 Report Share Posted June 28, 2007 Yeah that's a beauty oddxbird Link to post Share on other sites
Victory Posted June 28, 2007 Report Share Posted June 28, 2007 Yeah that's a beauty oddxbird <{POST_SNAPBACK}> It just needs a magwell expander....right Pitbull? Haha, j/k, it's all good. -Vic Link to post Share on other sites
oddxbird Posted June 28, 2007 Report Share Posted June 28, 2007 It just needs a magwell expander....right Pitbull? Haha, j/k, it's all good. -Vic <{POST_SNAPBACK}> lol vietnam style are going in there Link to post Share on other sites
MERCILESSPIT Posted June 28, 2007 Report Share Posted June 28, 2007 LOL Victory, he better not stick a mag chimney on that thing! Link to post Share on other sites
5 to 1 Posted June 28, 2007 Report Share Posted June 28, 2007 All it needs is a MIAD. Great looking rifle! If I ever had a M4 with a RIS, that is what it would look like. Link to post Share on other sites
MERCILESSPIT Posted June 28, 2007 Report Share Posted June 28, 2007 All it needs is a MIAD. Great looking rifle! If I ever had a M4 with a RIS, that is what it would look like. <{POST_SNAPBACK}> Probably not because that's a 16. Link to post Share on other sites
Victory Posted June 28, 2007 Report Share Posted June 28, 2007 LOL Victory, he better not stick a mag chimney on that thing! <{POST_SNAPBACK}> If it makes you feel any better, I'll be taking the black expander off of the ArmaLite pretty soon. Wanna' know why? The ArmaLite will become a Bushmaster, and it'll have a tan magwell expander! Muhahahahaha! The black one'll go on the Patriot. -Vic I'm such an evil person, aren't I? Link to post Share on other sites
oddxbird Posted June 28, 2007 Report Share Posted June 28, 2007 (edited) Probably not because that's a 16. <{POST_SNAPBACK}> whats a 16? and miads arnt my thing. Edited June 28, 2007 by oddxbird Link to post Share on other sites
5 to 1 Posted June 28, 2007 Report Share Posted June 28, 2007 Okay, if I ever had a long barreled AR-15. Happy now? Link to post Share on other sites
MERCILESSPIT Posted June 28, 2007 Report Share Posted June 28, 2007 LOL, Victory, you take it to personally bro, you do what you want man. I just think they look funcky and to be honest, it also make the gun look like the user has problems loading mags into thier gun or something, I just don't 'get' them. I'm always happy 5-1. See --> Link to post Share on other sites
Victory Posted June 28, 2007 Report Share Posted June 28, 2007 LOL, Victory, you take it to personally bro, you do what you want man. I just think they look funcky and to be honest, it also make the gun look like the user has problems loading mags into thier gun or something, I just don't 'get' them. I'm always happy 5-1. See --> <{POST_SNAPBACK}> I know bro., I'm just kiddin' ya'. It's all good. -Vic P.S. Just so the Mods don't get mad at us, heh. Link to post Share on other sites
MERCILESSPIT Posted June 28, 2007 Report Share Posted June 28, 2007 Nice, I see those and it makes me want to take my M5 off and put my handguards back on, heh. ...Nah. I do love 'em though. Link to post Share on other sites
Fuser Posted June 28, 2007 Report Share Posted June 28, 2007 Quick question: Which version of the Magpul CTR stock fits AEG's (more specifically Classic Army), Commercial or Milspec? This has been asked before but I couldn't dig up the answer. Link to post Share on other sites
Victory Posted June 28, 2007 Report Share Posted June 28, 2007 As far as I know...MILSPEC. -Vic Link to post Share on other sites
gerrysnaps Posted June 28, 2007 Report Share Posted June 28, 2007 My sr15 Magpul rifle. <{POST_SNAPBACK}> That kind of reminds me of an early version of NoMercy's recce rifle, from the stock and railcovers down to the far-forward mounted PEQ, except you've gone with a match barrel. I have the same front set but didn't use the match barrel. Seeing your setup it actually looks interesting after all. Link to post Share on other sites
Recommended Posts