millest Posted December 1, 2008 Report Share Posted December 1, 2008 none what so ever, is one of the snuggest fits ive ever used, its the battleaxe magwell and i can highly recommend it millest Link to post Share on other sites
Frakk2k Posted December 1, 2008 Report Share Posted December 1, 2008 Ah, thats what I tought, since the pmag is slightly thicker than the other M4 mags I have. Might buy myself a G36C with pmags then Link to post Share on other sites
pixie drift Posted December 1, 2008 Report Share Posted December 1, 2008 this thred has made me decide what type of gun to buy im gona go for a C36 of some kind but so many difant types to concider. i dont like it to be to long. i prefur the look of the shortter ones. maby with a torch and a sight. Â Link to post Share on other sites
millest Posted December 1, 2008 Report Share Posted December 1, 2008 what ever you do go for a jg, doesnt cost too much then if it goes pete tong now to find somewhere with the jg g36e in the uk Link to post Share on other sites
Vestaa Posted December 6, 2008 Report Share Posted December 6, 2008 Any1 know if these g36c mags is any good? http://www.rsov.com/index.php?target=produ...product_id=3115 http://www.rsov.com/index.php?target=produ...product_id=2690 http://www.rsov.com/index.php?target=produ...product_id=2119 Â Which is best? Â Cheers Link to post Share on other sites
Noart Posted December 6, 2008 Report Share Posted December 6, 2008 The midcap ones. Link to post Share on other sites
Vestaa Posted December 6, 2008 Report Share Posted December 6, 2008 The midcap ones.  Kk, thanks for quick answer  Will buy 6 of them ( http://rsov.com/index.php?target=products&...product_id=2119 ), How long do they last btw? Link to post Share on other sites
Vestaa Posted December 6, 2008 Report Share Posted December 6, 2008 (edited) Sorry for double post. What looks best on g36c, aimpoint or acog? And does http://rsov.com/index.php?target=products&...product_id=3227 fit g36? Â Cheers Edited December 6, 2008 by Vestaa Link to post Share on other sites
eddy909 Posted December 7, 2008 Report Share Posted December 7, 2008 Sorry for double post. What looks best on g36c, aimpoint or acog? And does http://rsov.com/index.php?target=products&...product_id=3227 fit g36? Â Cheers That suppressor should fit fine provide it's the same threading as that of the G36 barrel. As for sights that's mostly a matter of opinion, though I think ACOG optics look goofy on G36s for the most part. Link to post Share on other sites
aznriptide859 Posted December 9, 2008 Report Share Posted December 9, 2008 ^Think again    AC trades!!!   Newest G36KSK to my armory. Keeping this one, unlike every other G36 I have , and is my new primary. Link to post Share on other sites
ThompsonMuppet-uK Posted December 9, 2008 Report Share Posted December 9, 2008 That is the tits man thats sweet! Link to post Share on other sites
Altered_Soul Posted December 10, 2008 Report Share Posted December 10, 2008 Newest G36KSK to my armory. Keeping this one, unlike every other G36 I have , and is my new primary. Â Though I can tolerate the stock and mag adapter (I am a G36 purist), have you considered getting a an actual KAC RAS replica for a handguard? That one just never sits well with me. Â I like the ACOG on the modded C rail though. Link to post Share on other sites
Puding Posted December 10, 2008 Report Share Posted December 10, 2008 Â my g36ksk Link to post Share on other sites
Altered_Soul Posted December 10, 2008 Report Share Posted December 10, 2008 (edited)  my g36ksk  Nice, is the carry handle a modified C one or is it retail? If its retail, care to share? If its modified, nice job!  Oh, also, what happened to the selector switch markings? Edited December 10, 2008 by Altered_Soul Link to post Share on other sites
aznriptide859 Posted December 10, 2008 Report Share Posted December 10, 2008 Though I can tolerate the stock and mag adapter (I am a G36 purist), have you considered getting a an actual KAC RAS replica for a handguard? That one just never sits well with me. Â If I have the funds in the future, yes. Right now it's a G&G one, so it's not a very good replica of the real one, but it works for me Link to post Share on other sites
Puding Posted December 10, 2008 Report Share Posted December 10, 2008 Nice, is the carry handle a modified C one or is it retail? If its retail, care to share? If its modified, nice job! Oh, also, what happened to the selector switch markings?  its a modified star rail , the markings are not there as it has been sprayed OD, looking to get some color pictures up but i've had little good natural light of late Link to post Share on other sites
Altered_Soul Posted December 10, 2008 Report Share Posted December 10, 2008 Â Well, apparently I am the question ###### today, but here goes another carry handle question: Â First off, that is a great looking G36kA1 there dude, good job . Â Same question as I had for Puding though, is your kA1 carry handle a modified C? Both of yours and Puding's look great (I screwed up my hack job on a C handle and couldn't get the curve at the back end correct ), and I was wondering if yours was hand-done as well, or a bought kA1 handle. The reason I ask is because, whether its photo angle or lighting, yours looks like it has the extra 1/4th inch clearing the real steel handle has. Â Also, whats the front strip around the handguard for? IR Signature? And did you actually get an IR band or is it just something velcro-able? Â OK I will stop being annoying, just a couple of things from recent pics caught my interest. Â And thanks for the response Pudin, I would look forward to color pics, it looks great! Link to post Share on other sites
nickless Posted December 10, 2008 Report Share Posted December 10, 2008 Well, apparently I am the question ###### today, but here goes another carry handle question:Â First off, that is a great looking G36kA1 there dude, good job . Â Same question as I had for Puding though, is your kA1 carry handle a modified C? Both of yours and Puding's look great (I screwed up my hack job on a C handle and couldn't get the curve at the back end correct ), and I was wondering if yours was hand-done as well, or a bought kA1 handle. The reason I ask is because, whether its photo angle or lighting, yours looks like it has the extra 1/4th inch clearing the real steel handle has. No, that one looks like a modified C-rail. The "KSK" rail has a small bend in the front while the "C" one has a continious slant in the front. Also, the small metal parts that hold the screws reach up very close to the the height of the clearance, on a KSK rail you would see the extra height as a gap between that metal parts and the upper side of the clearance - if you get what I mean. Â Â Also, whats the front strip around the handguard for? IR Signature? And did you actually get an IR band or is it just something velcro-able? I have a rubber boot-band in the same spot on my rifle, I use it to put the muzzle cap there when it's not on the rifle. Apart from that, I can't think of a reason for a band there. Â Link to post Share on other sites
Altered_Soul Posted December 10, 2008 Report Share Posted December 10, 2008 No, that one looks like a modified C-rail. The "KSK" rail has a small bend in the front while the "C" one has a continious slant in the front. Also, the small metal parts that hold the screws reach up very close to the the height of the clearance, on a KSK rail you would see the extra height as a gap between that metal parts and the upper side of the clearance - if you get what I mean. Â Yeah, it just seems that my hack job seems to have much less clearance, and I am always on the lookout for a kA1 carry handle replica, hence the excitement everytime. SRC is making a "KSK" handle, but its just a hacked C one as normal, not with the extra clearance above the receiver. Â I have a rubber boot-band in the same spot on my rifle, I use it to put the muzzle cap there when it's not on the rifle. Apart from that, I can't think of a reason for a band there. Â I just see it in a lot of real steel pics of it, and was wondering what exactly its for. Â quickest one I could find: Â And of course, thanks again Nickless for the info . Link to post Share on other sites
SHOWEN1976 Posted December 11, 2008 Report Share Posted December 11, 2008 It's a modified C-rail on my G36K ,and I use the velcro to fix my pressure pad of flashlight . Link to post Share on other sites
SgtBojangles Posted December 11, 2008 Report Share Posted December 11, 2008 (edited) Altered Soul, please stop quoting pictures. If you continue, I will report your posts. Â I recently became the owner of the M4 mag well for my G36C... Have yet to test it out (after like 2-3 months of owning it...). Hopefully it will work flawlessly! Edited December 11, 2008 by SgtBojangles Link to post Share on other sites
WhutJP Posted December 12, 2008 Report Share Posted December 12, 2008 Â the full length barrel kit arrived yesterday - wee... Â all i need now is a c mag and then one day the dual optic carry handle and my g36 project will be complete. (i already have the single optic carry handle) Â Link to post Share on other sites
Altered_Soul Posted December 12, 2008 Report Share Posted December 12, 2008 (edited) all i need now is a c mag and then one day the dual optic carry handle and my g36 project will be complete. (i already have the single optic carry handle) Â The dual optic (by STAR) is very crappy. I recommend either somehow picking up an SRC A2 handle (single optics bridge with railed top), or to just grab a hand guard short rail and do it yourself. The STAR handle with optic and rail isn't as useful though, as the rail is recessed more than an SRC or custom job. Therefore, some longer attachments might not work as well (like an EOtech or similar). Edited December 12, 2008 by Altered_Soul Link to post Share on other sites
ollie_ty Posted December 12, 2008 Report Share Posted December 12, 2008 I recommend either somehow picking up an SRC A2 handle (single optics bridge with railed top) Â Or just buy the JG one. Link to post Share on other sites
Altered_Soul Posted December 12, 2008 Report Share Posted December 12, 2008 Or just buy the JG one. Â Link? Last I saw in stores was that SRC was the only maker of a good A2 handle. Link to post Share on other sites
Recommended Posts