Whan Posted June 20, 2009 Report Share Posted June 20, 2009 Protip #2: Take four zip ties, fold each one in half. wedge each one into the space above the lever to hold the lever down. It should be easy to get them off then. That's what I do with all my RS TD grips. Whan: nice to see more cuts got done in the redi-mag. I believe there is also a section cut out of the right side of it too. BTW, how is it putting a mag into the redi-mag with all the extra space in the top? Does the mag just want to keep going all the way to the top? Have you considered putting some high density foam or butchering/cutting the top off a STAR PMAG and shoving that into the top of the redi-mag so you don't see the open space? Oddly enough, my old mag I used to use would keep going up in the redimag too far, but these PMAGs don't have that problem anymore. I was thinking about cutitng a pmag to fill the space, but I decided it's probably fine without. What I really need is an internally broken RS PMAG, as it'll work perfect as a battery mag and will go all the way to the top. The redi-mod has more cuts that I haven't done, but I'm pretty happy with the way it is now. It took me and my buddy 1.5 hrs just to dremel the main lower front cut we did. Overall, I'm pretty happy with how my gun has turned out. Over time, a couple more Accessories, and I'm done! Link to post Share on other sites
mattmanic Posted June 20, 2009 Report Share Posted June 20, 2009 Isn't that a Falcon Industries product that Magpul offers on their site ... thus not really making it a Magpul part? Yep Manufactured by: Falcon Industries Link to post Share on other sites
1st_shooter Posted June 20, 2009 Report Share Posted June 20, 2009 (edited) Apparently the light switch, none-the-less a pretty lame excuse. You would think with a statement like, "That's about it unfortunately," he just would have foregone posting it. Oh well, water under the bridge. Lol thats why i made the comment of getting a magpul trigger guard just so i could get a pic in this thread but alas i have a fair old few bits coming for my GBB M4 so i can then whack it in this thread i wish they made GBB PMags! and some really nice pics above, is that a RS Pmag or is there an airsoft version with Innert rounds now? Also i have seen on "USMCCORPS" i think so its directed at him really the Black like "tabs" on the pmags what do they do? Edited June 20, 2009 by 1st_shooter Link to post Share on other sites
Whan Posted June 20, 2009 Report Share Posted June 20, 2009 I think Wayneard's photo is of a RS AR-15 Link to post Share on other sites
Wayneard3413 Posted June 20, 2009 Report Share Posted June 20, 2009 I think Wayneard's photo is of a RS AR-15 Correct... I just posted it to show the cuts on the Redi Mod Link to post Share on other sites
ViciousV10s Posted June 20, 2009 Report Share Posted June 20, 2009 Got the high-mount for the Micro...looks good but it is a *bit* high for zeroing at relatively short distances. Link to post Share on other sites
Quagmired Posted June 20, 2009 Report Share Posted June 20, 2009 Great pics, V10. I have new project underway that I hope to have done at the end of the week. Magpul/Noveske N4 10" I am staying away from the costa/haley builds as they have been done extensively Link to post Share on other sites
trip Posted June 20, 2009 Report Share Posted June 20, 2009 (edited) Iv got myself a magpul/vltor reciver DE and a larue 12' in the post I'm just waiting for the UBR in DE to come in stock somewhere so i can order one Edited June 20, 2009 by trip Link to post Share on other sites
ViciousV10s Posted June 20, 2009 Report Share Posted June 20, 2009 Great pics, V10. I have new project underway that I hope to have done at the end of the week. Magpul/Noveske N4 10" I am staying away from the costa/haley builds as they have been done extensively Thanks, I look forward to seeing your 10" N4, I can't decide how I feel about 10" rails, I need to see more of them. I was contemplating a bit doing a 10" Noveske rail on my WE. And here's a quick shot of the new stubby grip on my G&P M4A1 which I think I will be selling soon...I also put a Surefire M951 on but didn't snap a pic of that side of the rails yet... The stubby's really are quite comfy and look much better than standard length grips I think. Link to post Share on other sites
Quagmired Posted June 20, 2009 Report Share Posted June 20, 2009 All stubby grip, all the time. I have a QD FDE TangoDown rep this is great. Link to post Share on other sites
boomheadshot (infidel) Posted June 20, 2009 Report Share Posted June 20, 2009 Correct... where did you buy that dust cover its awesome !! Link to post Share on other sites
Unit 318 Posted June 20, 2009 Report Share Posted June 20, 2009 http://www.boomarms.com/sc/showcatalog.asp...goryName=Others Link to post Share on other sites
Apotheothenai Posted June 20, 2009 Report Share Posted June 20, 2009 *orders one immediately* Link to post Share on other sites
Wayneard3413 Posted June 20, 2009 Report Share Posted June 20, 2009 Well hell... In stock and cheaper than the one that I bought from Noveske haha Link to post Share on other sites
rws591 Posted June 20, 2009 Report Share Posted June 20, 2009 Isn't that a Falcon Industries product that Magpul offers on their site ... thus not really making it a Magpul part? We can always trust on you... Link to post Share on other sites
Mr Foxhound Posted June 21, 2009 Report Share Posted June 21, 2009 http://www.boomarms.com/sc/showcatalog.asp...goryName=Others Whats funny about this? Seems immature and stupid to me. (Also a little racist but i dont care about that) Link to post Share on other sites
Unit 318 Posted June 21, 2009 Report Share Posted June 21, 2009 Whats funny about this? Seems immature and stupid to me. (Also a little racist but i dont care about that) I think it's only funny if you have shells ejecting. Then the dust cover falls down and it really is a SURPRISE! But honestly, I don't care for it. I was merely helping someone Link to post Share on other sites
-MOOSE- Posted June 21, 2009 Report Share Posted June 21, 2009 Eh, what? Link to post Share on other sites
Reincarnation... Posted June 21, 2009 Report Share Posted June 21, 2009 Idk, I liked Team America: World Police; I did enjoy the "supercrappymation" of Matt Stone. Link to post Share on other sites
uscmCorps Posted June 21, 2009 Report Share Posted June 21, 2009 Whats funny about this? Seems immature and stupid to me. (Also a little racist but i dont care about that) Curious how it's racist? Homophobic possibly, but racist? Link to post Share on other sites
rws591 Posted June 21, 2009 Report Share Posted June 21, 2009 Whats funny about this? Seems immature and stupid to me. (Also a little racist but i dont care about that) It is a quote from Team America: World Police. When Noveske was still offering them, you could get both "Surprise Cock Fag" as well as "Team America World Police." How about some footy: Link to post Share on other sites
reaper16 Posted June 21, 2009 Report Share Posted June 21, 2009 Homosexuals arent a race....... Anyway, so my project just got pushed back 20 days, oddly enough this corresponds to Ebaybanned's backlog haha Still need to order Magpul XT rail covers, DE Pmag, Single Point sling, anyone know a good quality single point sling that will work well with an ASAP? a Link to post Share on other sites
Whan Posted June 21, 2009 Report Share Posted June 21, 2009 Homosexuals arent a race....... Anyway, so my project just got pushed back 20 days, oddly enough this corresponds to Ebaybanned's backlog haha Still need to order Magpul XT rail covers, DE Pmag, Single Point sling, anyone know a good quality single point sling that will work well with an ASAP? a Lol, besides the MS2? I've heard the Gear Sector ASP sling is pretty good http://www.gearsector.com/view/product/91/ Link to post Share on other sites
reaper16 Posted June 21, 2009 Report Share Posted June 21, 2009 (edited) MS2 im sure is excellent but im looking for something like the CQBR sling similar to the ones the SEALS use. Also it has to easily clip onto an ASAP sling plate. Edited June 21, 2009 by reaper16 Link to post Share on other sites
beretta Posted June 21, 2009 Report Share Posted June 21, 2009 this is an AGM GBB wearing some magpul goodness. Link to post Share on other sites
Recommended Posts