Jagdraben Posted June 14, 2006 Report Share Posted June 14, 2006 Phase Four. With a bipod for display purposes only. Link to post Share on other sites
Trasher Posted June 15, 2006 Report Share Posted June 15, 2006 Just finished shooting my team mate's CA36C, enjoy: Link to post Share on other sites
TerranCmdr Posted June 15, 2006 Report Share Posted June 15, 2006 Woah. Beautiful picture. Looks like an official promo pic. Link to post Share on other sites
systema Posted June 15, 2006 Report Share Posted June 15, 2006 Very nice picture, Trasher. Link to post Share on other sites
letterbomb Posted June 15, 2006 Report Share Posted June 15, 2006 What flash hider is that Jagdraben? Looks like you've cut it yourself? Link to post Share on other sites
n00bTard Posted June 15, 2006 Report Share Posted June 15, 2006 Wow, two of the coolest G36s I've seen in awhile, in a row. Nicely done guys Link to post Share on other sites
Jagdraben Posted June 15, 2006 Report Share Posted June 15, 2006 What flash hider is that Jagdraben? Looks like you've cut it yourself? <{POST_SNAPBACK}> It's a G&P M4 Rebar Cutter, I think.... Link to post Share on other sites
Kingmob3 Posted June 16, 2006 Report Share Posted June 16, 2006 Nice guns, Ive been reading this thred for the past two days off and on. I am going to get a CA36, most likely by the end of next month, Eventually set up as a KV norgie. KM3 Link to post Share on other sites
6ft4 Posted June 19, 2006 Report Share Posted June 19, 2006 My G36C Recent Setting for CQB Link to post Share on other sites
donnie Posted June 19, 2006 Report Share Posted June 19, 2006 My G36C Recent Setting for CQB <{POST_SNAPBACK}> whats going on there with the cary handle 6Ft4? Did you cut it away yourself? It balances the gun nicely. Link to post Share on other sites
6ft4 Posted June 19, 2006 Report Share Posted June 19, 2006 whats going on there with the cary handle 6Ft4? Did you cut it away yourself? It balances the gun nicely. <{POST_SNAPBACK}> it is a copy KAC flip up sights with rail. I will install the real one later. want to wait my B&T G36C handguard arrives and i will put all the new G36C parts on this one.... Link to post Share on other sites
Jagdraben Posted June 19, 2006 Report Share Posted June 19, 2006 Copy? Where did you get this copy? Link to post Share on other sites
6ft4 Posted June 19, 2006 Report Share Posted June 19, 2006 Copy? Where did you get this copy? <{POST_SNAPBACK}> any retail shops in Hong Kong. Link to post Share on other sites
Jagdraben Posted June 20, 2006 Report Share Posted June 20, 2006 Any on-line HK shops sell them...? Link to post Share on other sites
n00bTard Posted June 20, 2006 Report Share Posted June 20, 2006 They used to - they've all been sold out for as long as I can remember. I'd love to pick one up myself, if anyone ever makes it again. Link to post Share on other sites
Jagdraben Posted June 20, 2006 Report Share Posted June 20, 2006 NOOOOOO!!!!! KHAAAAAAAAN!!!!! &C.!!!!! Link to post Share on other sites
Sniper Sam Posted June 20, 2006 Report Share Posted June 20, 2006 Here's the finished gun, got my CA Lower yesterday. Only dissapointment is that the Marui worked nice with the selector switch, it was a nice tactile "click" when each position was selected on the fire selector, on the CA lower it doesn't. I had to do some modification to the body last night to fit the forearm, I'll have to go in and sand out some of the plastic burs to get rid of any nastiness left behind. Overall this was a worthy project, it took my plastic-y Marui gun and now this thing feels super tight, no creaks, feels 10x stronger. It's the same thing with my PTW, you can hold that gun up from the vertical grip alone at arms length without a doubt about the rigidity of that gun, this gun now feels the same way, looks way better, and now has trades. And yeah I can live with the ONE mis-spelling on there. I hope you can see the differences between the Army Code, Classic Army, and real H&K material. I'd say CA is spot on, and if AC was just a bit darker it'd be a perfect match. But regardless it's MILES ahead of Marui's material. Now this gun feels less like a conversion kit and more like a real production gun, but better. <{POST_SNAPBACK}> I have to say that is the best looking G36k in this thread. I love dual optics! Can you please give a parts list? Link to post Share on other sites
Titleist Posted June 20, 2006 Report Share Posted June 20, 2006 Thanks for the compliment, sir. Parts List: -Marui Based G36 (at least at first) -Classic Army G36 Lower Receiver -Army Code G36K Receiver -Army Code G36K Barrel assembly -Upgraded V3 Gearbox chock full 'o Systema parts @ 400fps -KM TN Barrel -Heckler and Koch Dual Optic Carry Handle -Heckler and Koch G36K Forearm -Heckler and Koch K Length stock I'm glad I hung on to this gun, as finding real H&K parts like the ones I have are a real pain in the *albatross*, and the wallet, to obtain anymore. I hope that helps you btw. Link to post Share on other sites
Robot 2000 Posted June 20, 2006 Report Share Posted June 20, 2006 See, that's what my G36 is going to look like, only with all STAR parts Link to post Share on other sites
Sniper Sam Posted June 20, 2006 Report Share Posted June 20, 2006 (edited) Thanks for the compliment, sir. Parts List: -Marui Based G36 (at least at first) -Classic Army G36 Lower Receiver -Army Code G36K Receiver -Army Code G36K Barrel assembly -Upgraded V3 Gearbox chock full 'o Systema parts @ 400fps -KM TN Barrel -Heckler and Koch Dual Optic Carry Handle -Heckler and Koch G36K Forearm -Heckler and Koch K Length stock I'm glad I hung on to this gun, as finding real H&K parts like the ones I have are a real pain in the *albatross*, and the wallet, to obtain anymore. I hope that helps you btw. <{POST_SNAPBACK}> Thanks Titleist, it looks amazing. How hard was it to fit the Hk parts? Oh and what is your battery situation? Edited June 20, 2006 by Sniper Sam Link to post Share on other sites
Spencerman Posted June 20, 2006 Report Share Posted June 20, 2006 Flicking through the pics, and considering getting a G36C airsoft gun, I was considering the following. I saw the Army Code body with the trades etc. and it looks great. I have also seen the various add ons for various versions. I was thinking Classic Army version gun with the Army Code body. Is it easy to change the body over? I have other plans also, but that will have to wait until I get one and take a pic for this thread. I love some of the pictures that are on here by the way, very nice. Link to post Share on other sites
Titleist Posted June 20, 2006 Report Share Posted June 20, 2006 It'll take you about 45 minutes to change it over properly if you take your time. As for fitting the real parts to the airsoft one: 1. Dual Optic - On the AC body it requires making the screw hole at the front of the gun a little taller to fit the horizontal screws that secure the scope to the rail. 2. Stock - you have to get a different swivel pin machined and you have to machine out the diameter of the hole on the stock a bit. I had Ko do these mods, back when the only way to make a G36K was through his help, sadly he packed up shop when the airsoft specific kits came out. 3. Handguard - you have to dremel or file away at the body, above the little nubs that hold the grip in place near the magwell, I'll take a pic of this when I have time. Link to post Share on other sites
HKG36 Posted June 20, 2006 Report Share Posted June 20, 2006 (edited) Here's the finished gun, got my CA Lower yesterday. Only dissapointment is that the Marui worked nice with the selector switch, it was a nice tactile "click" when each position was selected on the fire selector, on the CA lower it doesn't. I had to do some modification to the body last night to fit the forearm, I'll have to go in and sand out some of the plastic burs to get rid of any nastiness left behind. Overall this was a worthy project, it took my plastic-y Marui gun and now this thing feels super tight, no creaks, feels 10x stronger. It's the same thing with my PTW, you can hold that gun up from the vertical grip alone at arms length without a doubt about the rigidity of that gun, this gun now feels the same way, looks way better, and now has trades. And yeah I can live with the ONE mis-spelling on there. I hope you can see the differences between the Army Code, Classic Army, and real H&K material. I'd say CA is spot on, and if AC was just a bit darker it'd be a perfect match. But regardless it's MILES ahead of Marui's material. Now this gun feels less like a conversion kit and more like a real production gun, but better. <{POST_SNAPBACK}> Well its about time you got those parts. Edited June 20, 2006 by HKG36 Link to post Share on other sites
Titleist Posted June 20, 2006 Report Share Posted June 20, 2006 Well its about time you got those parts. <{POST_SNAPBACK}> Yeah the seller took FOREVER to get me the lower, I didn't realize when snagging the grip off ebay that he didn't have it, he had to import it from HK, ugh, LAME. 3 weeks is what it took. Link to post Share on other sites
Recommended Posts