ollie_ty Posted August 6, 2012 Report Share Posted August 6, 2012 2) most R&D is already learned from G36, and MP5. Then it's bound to fail! Link to post Share on other sites
Rob15 Posted August 6, 2012 Report Share Posted August 6, 2012 Being polymer also means they'll have spent a fair bit of money on moulds too, I can't see it being much cheaper really, if any cheaper at all. Link to post Share on other sites
Atsalakotos Posted August 6, 2012 Report Share Posted August 6, 2012 I haven't seen the G36s actually having any problems right? Or is it just that nobody has bought them? Link to post Share on other sites
hitmanNo2 Posted August 6, 2012 Report Share Posted August 6, 2012 I've not heard of any issues with the G36 but supposedly it is better than the WE. Link to post Share on other sites
LordElpus Posted August 6, 2012 Report Share Posted August 6, 2012 The only GBB G36s i have seen in game so far have all been WE. Link to post Share on other sites
Atsalakotos Posted August 6, 2012 Report Share Posted August 6, 2012 I've not heard of any issues with the G36 but supposedly it is better than the WE. I have used my WE A LOT and only a couple of parts broke that total like 30$.... I really don't think I can ask a lot more than that.. PS: I have been using my G36 in games since it came out... Link to post Share on other sites
kullwarrior Posted August 6, 2012 Report Share Posted August 6, 2012 I have used my WE A LOT and only a couple of parts broke that total like 30$.... I really don't think I can ask a lot more than that.. PS: I have been using my G36 in games since it came out... Same here but the plastic nozzle kept breaking. I've handle VFC, SRC (lesser known one) and WE I would say externally VFC wins hands down. Realistically WE lose completely, Kicking wise WE wins Link to post Share on other sites
Atsalakotos Posted August 6, 2012 Report Share Posted August 6, 2012 Same here but the plastic nozzle kept breaking. I've handle VFC, SRC (lesser known one) and WE I would say externally VFC wins hands down. Realistically WE lose completely, Kicking wise WE wins I have broken the nozzle only once, and this in extreme heat. (38 degrees Celsius) Does the VFC perform better? Accuracy, cooldown and reliability wise.. Link to post Share on other sites
Dreamer777 Posted August 7, 2012 Report Share Posted August 7, 2012 IDK, i love it but hate then love it again then cry silently. I want to but it and add some RS stuff and a couple of cooky things (An ACOG for an 8 inch .45 ACP Barrel?) But after the MP5... (Fetal position) Link to post Share on other sites
ollie_ty Posted August 7, 2012 Report Share Posted August 7, 2012 Ive been thinging about grabbing the VFC G36 for a while now, I took my SRC one apart, and the nozzle setup is dire. Link to post Share on other sites
Simo_Hayha Posted August 11, 2012 Report Share Posted August 11, 2012 Here we go again. I cant wait to see the the kiddies onsite with these, and then outperform them with zero issues, (cooldown, leaking mags, lack of reliability, cost, gas gun maintenance, lack of parts, lack of aftermarket support...hm...can I think of any more? Im sure I will later) using a G&G modified with basic upgrades. Oh. Your UMP has two round burst? So does mine. And I've been using it for two years without a mechanical failure. Link to post Share on other sites
blobface Posted August 12, 2012 Report Share Posted August 12, 2012 I cant wait to see the the kiddies onsite with these, and then outperform them with zero issues. Oh. Your UMP has two round burst? So does mine. And I've been using it for two years without a mechanical failure. Are we comparing a GBB with an AEG here...? ......... Link to post Share on other sites
hitmanNo2 Posted August 12, 2012 Report Share Posted August 12, 2012 A. B. I doubt you will see many of these considering how rare the VFC G36 and MP5s are on the field. C. Some people don't like sewing machines. And will happily accept GBB's foibles. D. Oh, your UMP goes phut, phut, phut. Awesome. Link to post Share on other sites
bankz5152 Posted August 13, 2012 Report Share Posted August 13, 2012 A. B. I doubt you will see many of these considering how rare the VFC G36 and MP5s are on the field. C. Some people don't like sewing machines. And will happily accept GBB's foibles. D. Oh, your UMP goes phut, phut, phut. Awesome. I am one of these people. Would much rather have the sound, recoil and realism of the GBBR system than a sewing machine. However that said the VFCs tend not to go BANG BANG BANG but more BANG - oh *suitcase* is jammed - BANG BANG - VENT..... Link to post Share on other sites
hitmanNo2 Posted August 13, 2012 Report Share Posted August 13, 2012 I think we may just have to accept VFCs (the MP5 at least) needs to run on 134a for optimum performance Link to post Share on other sites
Interficium Posted August 13, 2012 Report Share Posted August 13, 2012 Here we go again. I cant wait to see the the kiddies onsite with these, and then outperform them with zero issues, (cooldown, leaking mags, lack of reliability, cost, gas gun maintenance, lack of parts, lack of aftermarket support...hm...can I think of any more? Im sure I will later) using a G&G modified with basic upgrades. Oh. Your UMP has two round burst? So does mine. And I've been using it for two years without a mechanical failure. I want to see these fields you're playing on that have lots of kids using VFC gbbs. Link to post Share on other sites
3vi1-D4n Posted August 13, 2012 Report Share Posted August 13, 2012 On the M4, I shortening the nozzle by about a 1mm. The jamming disappeared and stopped the nozzle from breaking/deforming and no venting. Link to post Share on other sites
hwagan Posted August 14, 2012 Report Share Posted August 14, 2012 Oh. Your UMP has two round burst? So does mine. And I've been using it for two years without a mechanical failure. Any electrical ones? I haven't replaced any trigger contacts in my WOC lately... or re-wired it... or, in fact, done anything other than feed it .3's and gas and tweaked the hop a bit. Still, before this gets any further, the GBB v AEG arguement is ridiculous, always has been, always will be. AEG's are cheaper, more reliable in general and a bit more practical. GBBR's are more fun, but you need to put the effort in sometimes. It is literally that simple. Gas = Fun, finicky, expensive. AEG = Reliable, pants noise, cheaper. VFC UMP = Unlikely to be any of the above, to be honest. Except possibly the pants noise, I haven't actually watched the video with sound yet. And I need a sandwich, so it's unlikely I will.. Link to post Share on other sites
WhiteHawksan Posted August 14, 2012 Report Share Posted August 14, 2012 I'm pretty sure it'll be finicky too And you can count on expensive. Link to post Share on other sites
Dagonet Posted August 15, 2012 Report Share Posted August 15, 2012 what am bestest My star UMP goes phut phut phut because i stuffed loads of foam in side it, and made a a nice carbon can for it, with black BBs it's funny because the targets tend to look about, then i shoots them again and they can't see or hear me Only issue i have had is some BBs jamming in mags. I get my other jollys running around with a tricked up Glock. If a GBB UMP thats reliable, dosn't leak, and is no more bother than running a TM pistol was available.........i would have one after someone else has bought it and arnies has a 10 page ongoing review and links to all spares available (or most likely lack of) and trouble shooting guide, and maybe some natty little mag warmers for winter use. Link to post Share on other sites
HardcoreCook Posted August 23, 2012 Share Posted August 23, 2012 · Hidden by Rob15, August 23, 2012 - Spamming to 100 posts Hidden by Rob15, August 23, 2012 - Spamming to 100 posts Nice recoil, didn't expect that from such a small bolt. Link to post
Desert.Express Posted October 9, 2012 Report Share Posted October 9, 2012 Link to post Share on other sites
Desert.Express Posted October 9, 2012 Report Share Posted October 9, 2012 The gun seems to have the correct RS trades everywhere,with no Umarex nonsense..but I'm afraid is not gonna be released without the usual Umarex guff. Link to post Share on other sites
bankz5152 Posted October 10, 2012 Report Share Posted October 10, 2012 Looks amazing as usual from VFC shame it wont work though. Link to post Share on other sites
rusTORK Posted October 10, 2012 Report Share Posted October 10, 2012 Markings are nice this time. Umarex reminded? No umarex yet? Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.