oddxbird Posted August 9, 2007 Report Share Posted August 9, 2007 sr-25's are not my thing, but that one is a BEAST!! Link to post Share on other sites
Philip Aram Posted August 9, 2007 Report Share Posted August 9, 2007 Where does the battery go? A PEQ box if you did get in working? Link to post Share on other sites
iZe Posted August 9, 2007 Report Share Posted August 9, 2007 Yeah...a PEQ with 10,8V. First off...The wireing was a hell and I had to buy a "Dremel"-tool to be able to modify the outer barrel for it. The magpul-stock did not fit on the metalbody even with a adapter. (there was no ehm..."rails" for it in the back of the metalbody) Then I got the wrong sectorgear with G&P´s gear-kit and the right ones were out of stock everywhere. When I finally got my hands on one after 2 months (!) we assembled it and got the box to work for like two shots before the tappetplate broke down and also the selectorplate had to be modified to work properly.  Like "oddxbird" said it was a beast...a beast from hell. So I got rid of the damn thing, I hated it and I never want to see it again... Link to post Share on other sites
Cali Posted August 9, 2007 Report Share Posted August 9, 2007 (edited) Yeah...a PEQ with 10,8V. First off...The wireing was a hell and I had to buy a "Dremel"-tool to be able to modify the outer barrel for it. The magpul-stock did not fit on the metalbody even with a adapter. (there was no ehm..."rails" for it in the back of the metalbody) Â I had one of the stocks on mine, but ended up removing it for the same battery issues you mention. No way I was going to battery bag one, either. I did try a battery sling, but had issues. Â I'm surprised the stock didn't fit...mine fit fine. Was yours a G&P or CA? Mine is G&P. Edited August 9, 2007 by Cali Link to post Share on other sites
iZe Posted August 9, 2007 Report Share Posted August 9, 2007 (edited) It was a G&P, the first version (and overpriced!) that came out. I tried to mail G&P but they had no answer to my problem with the body (they thought it was a real steel gun X_x), then I convinced them to make the URX by sending them a lot of pics. (well, at least Id like to think so hehe, about 6-7months later it was out on the market.) Edited August 9, 2007 by iZe Link to post Share on other sites
dr3w Posted August 9, 2007 Report Share Posted August 9, 2007 homeade slings ftw Link to post Share on other sites
luvs2shoot Posted August 9, 2007 Report Share Posted August 9, 2007 lol. awesome! Â does it actually shoot out that cone shaped front end? Link to post Share on other sites
Yeager Posted August 9, 2007 Report Share Posted August 9, 2007 How in the hell did you get that through customs? Link to post Share on other sites
dr3w Posted August 9, 2007 Report Share Posted August 9, 2007 it currently shoots only shower shells, but im having some "rpg heads" made which shoot nerfs  I bought it from a collector last year, he said it would be pretty much impossible to get one in now... Link to post Share on other sites
babybackribs Posted August 9, 2007 Report Share Posted August 9, 2007 Per request:  Internal  -Madbull M4 tightbore barrel -KM aluminum cylinder -Systema gearbox spring set -Prometheus bearing spring guide -Prometheus Torque-up gears (standard ratio) -G&P polyacetal piston (new version) -Systema Silent piston head -Systema Silent cylinder head -G&P aluminum nozzle -Systema semi-auto cut off lever -G&P safety lever -Guarder Tappet Plate -Prometheus anti-reversal latch -Systema Selector Plate -PDI 170% spring -Laylax Strike Chamber -Madbull Shark Hop nub -Madbull Shark hopup packing -Systema Magnum motor -G&P heat-sink grip end -Prometheus gold plated motor leads -Prometheus shims -6MilSpec Gear Box with 7mm Bearing Bushings (CNC'd of milspec aluminum) -F2, Level 4-5, 7mm Bearing Bushings (able to spin at over 70,000 RPM) -Systema Lo-res switch assembly, bridged -Deans 16-guage, 660 strand wiring -Deans connectors  External  G&P crane stock tube CA Crane stock --10.8v 4200mah NiMh crane battery w/ Deans connectors -Airsoft Surgeon laser engraved body -Action #40 flip up rear sight -CA forward sling mount -Hurricane body pins -G&P Aimpoint -G&P throw lever mount -G&P Steel Carry Handle -G&P rear sling mount w/ bungee sling -G&P M203 RIS Long --5 MadBull XM108HP CO2 shells (limited edition, 300 made) --5 CA 120-round shells -G&P M203 RIS leaf sight -SGM M910 -Star Hogue pistol grip -Hogue grip (real steel, modded) -King Arms ambi-mag catch -King Arms sniper trigger guard -MadBull ambi charging handle -King Arms selector switch -King Arms trigger -King Arms Free float CQBR length RIS system -King Arms PRI steel flip up front sight type A -King Arms Steel Gas tube -Classic Army 2-piece M4 outer barrel -Proud Troy medieval flash hider   That's not including what I've had for it before. Link to post Share on other sites
Chrissyg Posted August 9, 2007 Report Share Posted August 9, 2007 Sounds nice...but means nothing without pics. Link to post Share on other sites
Batou-san Posted August 9, 2007 Report Share Posted August 9, 2007 Sounds nice...but means nothing without pics. <{POST_SNAPBACK}> Â On the previous page mate Link to post Share on other sites
Little para Posted August 9, 2007 Report Share Posted August 9, 2007 Pics have a broken link or something. dr3w that thing is *fruitcage* awesome, i would love to have one of those rather than the crappy plastic LAWs. Link to post Share on other sites
ThaFlash Posted August 9, 2007 Report Share Posted August 9, 2007 OK, I'll bite.  1st. G&P M4 Commando Troy MRF-C YHM Front Flip Site Troy Rear Sight Aimpoint Comp ML2 (Switched for EOTech 511) Magpul M93A2 w/ Strike Plate & HK sling point G&P Real Stock Adaptor G&P Troy Metal Body (because the Colt one broke after someone dropped it)  Prometheus Standard Gears Guarder Piston Guarder Spring   2nd. Hovering somewhere around the 1k area, probably just a bit below G&P M4 Troy MRF-R (paid a premium when they were hard to find, still a great value) Troy SKD Backup Iron Sights Troy Rear Sling Mount  Prometheus Gears (I think standard, it's been a while) Guarder Piston Guarder Spring  3rd. Don't have this one anymore, but it was fun to build G&P M4 Troy MRF-MX Magpul PRS White Oak Armament Receiver Extension G&P Stock Adaptor Guarder M4 Barrel Guarder M16 Front Barrel Extender (threaded 1/2" x 28)  Prometheus Max Torque Gears Prometheus Half Tooth Piston Prometheus Spring Guide Prometheus Cylinder Prometheus 7mm Bearings Prometheus 15.5" Barrel Guarder Spring Systema Ultra Torque Motor MOSFET (by me so it's sloppy but effective)  I didn't include spare parts or parts that I tried out and either broke or I didn't like. I also didn't include some parts that i have coming in... mostly because I don't remember all of them and because I'm not sure if they'll work right.  I also won't include magazine, BB's, slings, batteries and chargers. Hey, I can easily break 1k by just having my mags, magpuls, batteries and chargers next to a $2 springer. Link to post Share on other sites
luvs2shoot Posted August 10, 2007 Report Share Posted August 10, 2007 new pics:  the one to the left, (the M4) is over 1k. the M14 will be too once i get a new FTK installed  Link to post Share on other sites
msx361 Posted August 10, 2007 Report Share Posted August 10, 2007 Wow, ive seen that photo in the M14 thread, the painted weapons thread, the pictures of your weapon thread and now this one. Way to pimp you guns lol. Link to post Share on other sites
luvs2shoot Posted August 10, 2007 Report Share Posted August 10, 2007 lol that's cause i don't have many pics...lol  maximize for effect Link to post Share on other sites
msx361 Posted August 10, 2007 Report Share Posted August 10, 2007 It's the american way Link to post Share on other sites
Albert E. Posted August 18, 2007 Report Share Posted August 18, 2007 Klick for supersize     Parts:  Classic Army M15A4 SPC ( Special Purpose Carbine ) - 250.00$ (used)  Tuning: Guarder Shim Set - 2,40$ Guarder Teflon Grease for AEG Gearbox - 3,00$ Marui Cylinder Grease - 7,00$ Prometheus Hard Reversal Stop Latch for Ver. 2/3 - 12,00$ Guarder A.E.G. Tune-Up Spring - SP110 - 12,00$ KM Type Separate Urethane Rubber Camber RH65 New Type - 14,50$ GRS 7mm Bearing Axle Hole - 15,00$ Systema Hop-Up Unit - 29,10$ DeepFire Titanium Piston Full Teeth - 34,50$ HurricanE Tune Up Kit for M4A1 (M120s) - 43,00$ Prometheus 6.03 EG Barrel for M4/SR16/SG511 (363mm) - 48,00$ Systema Flat Gear Set IV (Super Torque Up) - 65,02$  Tunging sum: 285,48$   Outer parts:  G&P Metal Rear Sling Adapter for M4A1 / RIS / XM177 ( Type 2 ) - 8,00$ Magpul Enhanced M16 Trigger Guard - 24,00$ Magpul PTS MIAD Grip (Black) - 30,00$ Star Complete Stock Set 1 ( Black ) - 104,00$ G&P M4A1 Metal Body with Dust Cover / 6mm Gearbox - 141,00$ King Arms 10 inch Free Floating Forearm - 167,00$  Outer parts sum: 474,00$   Accessories: Falcon ERGO Rail Hand Stops (Black) (x2) - 7,00$ G&P Gas Tube for M4A1 - 8,00$ G&P RAS Slim Rail Cover ( Black ) - 17,00$ Star Flip Up Rear Sight - 21,00$ G&P Raider Foregrip ( Black ) - 22,00$ G&G Bipod Mount - 25,50$ Star QD Flip-Up Front Sight - 26,00$ Classic Army M24 Bipod - 40,00$  Accessories sum: 166,50$  Grand Total Costs: 1175,98$ Link to post Share on other sites
Lithium Jack Posted August 18, 2007 Report Share Posted August 18, 2007 Albert E., that's awesome... It looks so good with the short mag Link to post Share on other sites
Albert E. Posted August 18, 2007 Report Share Posted August 18, 2007 Thank you. Â That's a selfmade 30rds. Lowcap btw, made out of a MAG midcap. Link to post Share on other sites
iceman718 Posted August 21, 2007 Report Share Posted August 21, 2007 Â Â Sun Project M16 - Steel bolt and carrier - Steel recoil weight - Upgraded recoil spring - Upgraded spring guide - Flat top receiver - Heavy steel outer barrel - Custom 6.03 tightbore barrel - AS4L custom bearing - Steel recoil screw - Custom adjustable hopup - 3rd o-ring - Dustcover mod - Vltor OD stock - Vltor stock tube - SOG Recoil pad - K.A.C. R.A.S.II - Tango Down OD foregrip - Fobus G27 OD contoured pistol grip - Tango Down OD rail covers - Guarder 30mm Military type red dot sight - Nitro PRI flip up front sight - TW Laser unit - Big Latch tactical charging handle latch - Magpul enhanced trigger guard - Custom white trademarks - Weathered effect - Single point sling for Vltor stock - Resin moly coat finish - G&P M203 long barrel RAS - MadBull XM204HP CO2 King grenade - QD fittings Link to post Share on other sites
MODDAN Posted August 21, 2007 Report Share Posted August 21, 2007 (edited) My contribution, which is well inside the 1K limit: Â TJERNBERG Custom AK5 (mine's the one on the right). Â Featured also my TJERNBERG AK5 with my own custom AK4, which is also inside the 1K limit: Edited August 21, 2007 by MODDAN Link to post Share on other sites
hardboiledcop Posted August 21, 2007 Report Share Posted August 21, 2007 (edited) Â Gotta be at least 1000 dollars in this gun.. grips alone were 3 figures.. Â ta. Edited August 21, 2007 by hardboiledcop Link to post Share on other sites
Falcon357 Posted August 21, 2007 Report Share Posted August 21, 2007 Awesome pic hbc, are the grips one off or production? Link to post Share on other sites
Recommended Posts