KTcerberus Posted December 12, 2007 Report Share Posted December 12, 2007 CA M24 SOCOM Sniper Parts PDI Steel Cylinder PDI Steel Cylinder Head PDI Steel Spring Guide PDI Aluminum HARD Piston PDI SPRII 1.8j Variable Pitch Spring PDI 6.01mm X 509mm Tightbore Barrel PDI Dual Control Lever Hop-Up Unit King Arms Light Weight APS2 Trigger King Arms Spring Eject Bipod King Arms 3.5-10X40mm M3 Illuminated Reticle Scope Guarder 1.25" Leather Sniper Sling Guarder Silicone Hop-Up Bucking Weaver Quad-lock 25mm Scope Mounts Bultler Creek Flip Up Scope Covers Custom inner barrel spacers Custom Hop-Up airseal Custom smiley face! There is a pile of other spare parts in my room that I used to try and find the best combination for power and accuraccy. Link to post Share on other sites
LORD_SEX Posted December 22, 2007 Report Share Posted December 22, 2007 My two latest guns, both more than 1k. I will try to take pics from all my 1k guns asap. Link to post Share on other sites
Cons Posted December 22, 2007 Report Share Posted December 22, 2007 hey Ktcerberus did you get the flip up scope covers from here (http://www.kitterytradingpost.com/product.php/pid/103/sid/649/prodid/6862) how do you tell which size to get? I want to put them on a Tasco 6-24x50 Link to post Share on other sites
Ochronix Posted December 22, 2007 Report Share Posted December 22, 2007 bought off magzs here over the summer, but a total of 1.3 grand was put into it I think. with a m120 gb Link to post Share on other sites
KTcerberus Posted December 22, 2007 Report Share Posted December 22, 2007 hey Ktcerberus did you get the flip up scope covers from here (http://www.kitterytradingpost.com/product.php/pid/103/sid/649/prodid/6862) how do you tell which size to get? I want to put them on a Tasco 6-24x50 I bought mine from a sporting goods store. for a tasco 3-9x40mm scope you need 19 eye, and 27 obj covers. Idon't know what size you need but if you have a micrometer you can measure your scope and use the sizing chart to pick the right covers. Link to post Share on other sites
Magsz Posted December 22, 2007 Report Share Posted December 22, 2007 Decompress that spring bro! I miss that gun, what a great performing weapon that was, nice weight and balance too. Link to post Share on other sites
Ochronix Posted December 22, 2007 Report Share Posted December 22, 2007 Yea i did as soon as I put it backtogether after that picture, it had just jammed so... Link to post Share on other sites
masakarijoe Posted December 23, 2007 Report Share Posted December 23, 2007 KT cerberus, i too have an m14 with an m203: i thought i was the only one. -joe Link to post Share on other sites
aznriptide859 Posted December 23, 2007 Report Share Posted December 23, 2007 AK SOPMOD, built off a CM031. It's nearing $1k spent (once I get my Eotech it will >.<). Support Weapon Version: Link to post Share on other sites
KTcerberus Posted December 23, 2007 Report Share Posted December 23, 2007 KT cerberus, i too have an m14 with an m203: i thought i was the only one. -joe I thought mine was the ony one too! It's nice to know somebody else has one, and I'm not a weirdo. Link to post Share on other sites
snowman Posted December 23, 2007 Report Share Posted December 23, 2007 $1k doesn't buy you much these days... Cheers. Link to post Share on other sites
InfoH Posted December 23, 2007 Report Share Posted December 23, 2007 looks nice with the 2 differnt colours Link to post Share on other sites
Tallbloke Posted December 23, 2007 Report Share Posted December 23, 2007 looks nice with the 2 differnt colours 3 different colours..... Link to post Share on other sites
Magsz Posted December 23, 2007 Report Share Posted December 23, 2007 Yeah, thats one thing i was never really happy about. The "tan" that G&P uses for alot of their parts is way too light. Its like a cream colored tan, not really a flat dark earth like the magpul rail covers. It looks alot better in different lighting. Link to post Share on other sites
luvs2shoot Posted January 3, 2008 Report Share Posted January 3, 2008 TM M4 CASV the externals cost me over 1k alone the only thing stock TM is the trigger and front sight. EVERYTHING else is aftermarket Link to post Share on other sites
0nslaught Posted January 3, 2008 Report Share Posted January 3, 2008 what the...the externals by themselves are 1k?! can i get a parts list? is that a real LMT Crane stock and a real VLTOR CASV? Link to post Share on other sites
Carbine Posted January 3, 2008 Report Share Posted January 3, 2008 Either alot of people pay WAAAAY too much for their guns or overestimate their value! But you guys are right, a 1000usd just doesn't buy you as much as it used to. Especially with the current EUR = USD conversion rate of around 1 = 1,47 Link to post Share on other sites
luvs2shoot Posted January 3, 2008 Report Share Posted January 3, 2008 let me double check my calculations then External Parts: CA M15 convertible barrel- $80 Aimpoint w/high mount- $85 G&P Z-Type Aimpoint Mount- $55 King Arms CASV- $170 STAR TAC grip- $35 UTG Black Vertical Grip- $20 Beamshot 1000 laser BK- $60 Hurricane Knight's SR-16 MBK- $190 CA M15 Crane Stock Tan- $105 G&P KAC Sniper Trigger Guard- $15 STAR QD Rear Sight- $30 CA M4 reinforced body pins- $15 Total: $860 all parts were paid for at AEX and I got the CASV at Evike. prices do not include tax and the labor charges to convert my TM RIS w/ PEQ to a crane battery (cutting the body, modifications,etc) hmm it seems that you are right. the externals alone did not exceed the $1000 mark (but it was close!) however, the base gun TM M4 RIS ($310) + intellect 9.6v 3600mah batt ($68) + labor for conversion + external parts ($860) well exceeds the 1k mark! Link to post Share on other sites
Althis Posted January 6, 2008 Report Share Posted January 6, 2008 bought off magzs here over the summer, but a total of 1.3 grand was put into it I think. with a m120 gb oh *beep* how much did that MRP cost you? Link to post Share on other sites
Magsz Posted January 6, 2008 Report Share Posted January 6, 2008 I cut him a good deal. Link to post Share on other sites
Armourpiercing Posted January 6, 2008 Report Share Posted January 6, 2008 (edited) I'm never going to get bored of flashing this baby... I know most of you have seen it before but hey - WALTHER 2000 AEG Y'ALL!! AP. Edited January 6, 2008 by Armourpiercing Link to post Share on other sites
Sarge133 Posted January 6, 2008 Report Share Posted January 6, 2008 That gun is made of pure win. Link to post Share on other sites
eel one [COE] Posted January 6, 2008 Report Share Posted January 6, 2008 HKM4D-SD Interceptor: This is my old trusty tool for most scenarios. Below is the shopping list and prices from WGCshop and RedWolfAirsoft. Unless the part is mentioned in the list, it originates from the base gun or is included in a set: Base gun TM SR-16: 272$ ------------------ sub total: 272$ External parts HurricanE HKM4D receiver: 212.50$ HurricanE HK m4 sights: 84$ G&P stock: 36.50$ G&P rail covers: 17$ VFC Tac grip: 15.50$ G&G Sling swivel: 21.50$ Laylax/First Factory Dark knights SD adapter: 32$ Laylax/First Factory slip ring: 37$ KSC TMP silencer: 60$ Custom made tread adapter for silencer: priceless Magpul trigger guard: 26$ HurricanE grip: 34$ Systema grip end: 19.20$ PDI chamber block: 40$ ------------------------ sub total: 635.20$ Internal Systema gear box shell: 54$ Systema switch block: 32$ Systema gears: 61.20$ Kanzen ceramic ball bearings: 35$ Laylax/Prometheus anti reversal latch: 12$ Systema spring guide: 15.50$ Systema spring: 15.50$ Systema spring set: 4.50$ Laylax/Prometheus cylinder head: 20$ Laylax/Prometheus cylinder: 20.50$ Laylax/Prometheus selector plate: 11.50$ Guarder tappet plate: 10$ Deep Fire piston: 14.50$ Systema piston head: 18$ Systema nozzle: 10.50$ Madbull hop-up rubber: 8$ Madbull tight bore: 34.99$ Systema hop-up unit: 30$ Laylax/Prometheus motor connectors: 7$ MP-Jet 3.5mm connectors: 4$ Laylax/Prometheus wires: 11.50$ ----------------- sub total: 430.19$ Others Battery: 58.99$ EO-Tech: 450$ ------------------ sub total: 508.99 -------------------------- Base gun: 272$ Externals: 635.20$ Internals: 430.19$ Others: 508.99$ -------------------------- Grand total: 1846.38$ -------------------------- On top of this is all the magazines and ranger plates: 1 x TM std mag: free bee 4 x Magpul PTS: 120$ 6 x KA: 72$ 2 x MAG: 17.5$ 7 x Ranger plates: 87.5$ ------------- sub total: 297$ So all in all I have spent 2146.38$ on this gun and its acsseorys. But if be leave out optics, batteries and magazines we end up with a price tag of 1337.39$ alone in parts. Add to this shipping, 3.4% customs fee and 25% VAT, along with countless hours of mechanic work and parts spends to research the setup I have found works best for me... I should just have started out with a PTW MAX, it would have been cheaper. But then again, the PTW did not exist when I started this build 5 or 6 years ago. Link to post Share on other sites
Vercingetorix Posted January 6, 2008 Report Share Posted January 6, 2008 Where did you get them kanzen bearing from? Did you have to do any custom work to your GB shell or your bearings to get them to fit? Do they fit 6mm gearbox shell? I am VERY intersted! And Just so this isn't spam, my marui SR-16 with only internals and the gun, and some externals (nowhere near finished) totalls over $1300 without optics mags shipping, tax, batteries, etc. I expect to put at least another $400 into it, at the very minimum... Although I am contemplating ditching the G&P front end I have and getting a KAC URX 2 but i don't know if it would fit, and what special tools and knowledge I need to install it... So if anybody knows please tell me Link to post Share on other sites
eel one [COE] Posted January 7, 2008 Report Share Posted January 7, 2008 I got the bearing of the kanzen-bearings.com web site. But it have been down for a long time now so I'm not sure where to get them now, if the company only do whole sale now or if the company have closed down. Anyway, the bearings was a drop in replacement for the systema 7mm bearings that came with the gearbox shell. Link to post Share on other sites
Recommended Posts