phoenix360mute Posted September 30, 2006 Report Share Posted September 30, 2006 just wondering, i want an SCW3 base gun for the GSR project, but the only frames and slides they have are SCW2, can i put an SCW3 internals into an SCW2 frame? Link to post Share on other sites
ViciousV10s Posted October 1, 2006 Report Share Posted October 1, 2006 According to this guy you can http://www.arniesairsoft.co.uk/forums/inde...50&hl=SCW2+SCW3 Link to post Share on other sites
Mathub Posted October 1, 2006 Report Share Posted October 1, 2006 Well, I agree with Mobius. But on prime kits, you may have issues with the scw3 firing pin in an scw2 kit. But I think that prime released a gsr kit for scw3 (no big change in my opinion). Link to post Share on other sites
CplHicks Posted October 1, 2006 Report Share Posted October 1, 2006 (edited) I'm going start buying bits after X-mas, so my Desert Warrior will be the 1st of my projects for 2007. Bits and gubbinz i need - Western Arms Kimber MARSOC ( S.C.W. Ver. 2 ) - Creation Kimber Desert Warrior Aluminum Slide & Frame - G-10 Gunner Grips in Coyote Brown - 3x Western Arms 23 Rds Magazine for Government Series - Sheriff .45 Egg Hole Hammer ( Black ) - Custom powder coated outer barrel and trigger in black - Safariland 6004 - Gemtech TRL in Coyote Tan - Streamlight M3 taclite So it'll look like this with a 3 hole trigger Even if it takes me all year to complete, I aren't bothered, just going get it piece by piece. Edited October 1, 2006 by CplHicks Link to post Share on other sites
Lithium Jack Posted October 1, 2006 Report Share Posted October 1, 2006 Sounds good, I have a feeling that the SCW2 ICQB/MARSOC will be as rare as anything by 2007 though... Link to post Share on other sites
CplHicks Posted October 1, 2006 Report Share Posted October 1, 2006 Might just use mine if i cant source another one. Link to post Share on other sites
evilliboba Posted October 1, 2006 Report Share Posted October 1, 2006 Milla your 1911 has convinced me to get one. It should be here on Tuesday! The PGC metal kit will be ordered sometime in the next month. My poor Paypal account has $3.45 left... Link to post Share on other sites
Milla Posted October 2, 2006 Report Share Posted October 2, 2006 Milla your 1911 has convinced me to get one. It should be here on Tuesday! The PGC metal kit will be ordered sometime in the next month. My poor Paypal account has $3.45 left... <{POST_SNAPBACK}> lol, tell me about it, i want to buy gunner grips, but i cant until next week when i get paid Link to post Share on other sites
CplHicks Posted October 2, 2006 Report Share Posted October 2, 2006 Now time for me to work out the cost. - Western Arms Kimber MARSOC ( S.C.W. Ver. 2 ) $199 - Creation Kimber Desert Warrior Aluminum Slide & Frame $380 - G-10 Gunner Grips in Coyote Brown $65 - 3x Western Arms 23 Rds Magazine for Government Series $141 - Sheriff .45 Egg Hole Hammer ( Black ) $48 - Custom powder coated outer barrel and trigger in black. Not sure on this yet, gotta have a word with the bloke who's doing it. These will be coming at a later date - Safariland 6004 $115.84 - Gemtech TRL in Coyote Tan $20.95 - Streamlight M3 taclite $119.95 Total of $1089.74 which is 581.85GBP. Prices from UnCo, WGC, Optactical and Lightfighter Link to post Share on other sites
Titleist Posted October 2, 2006 Report Share Posted October 2, 2006 Yeesh, I shouldn't have shown you my gunner grips, now that everyone is copying mine. Link to post Share on other sites
CplHicks Posted October 2, 2006 Report Share Posted October 2, 2006 LOL. Yes indeedy, you should have shown us all. Link to post Share on other sites
SilentScope Posted October 2, 2006 Report Share Posted October 2, 2006 (edited) Yeesh, I shouldn't have shown you my gunner grips, now that everyone is copying mine. <{POST_SNAPBACK}> We seen them on militarymorons!!!! Maybe I'll man up and sand mine down like all those custom 1911 shops do so I can be different. It would kinda be an expensive mistake if I *fruitcage*ed up though Edited October 2, 2006 by SilentScope Link to post Share on other sites
elsermana Posted October 2, 2006 Report Share Posted October 2, 2006 Since postion on the general section on this site hasn't really helped I was wondering if any of you guys knew where to find sheriff parts? I know you can find them at various HK companies but sometimes they have them out of stock or just not at all. Is there just one place where they have a lot of them? I only need two parts! Dentrinity carries the two I want but one is out of stock and they don't want to tell me if it'll ever be back in stock. I really need your help! (Please don't suggest Real Steel parts because n00b3r is doing all of the fitting and I don't think he wants to spend hours on one part trying to get it to fit! Link to post Share on other sites
Titleist Posted October 2, 2006 Report Share Posted October 2, 2006 We seen them on militarymorons!!!! Maybe I'll man up and sand mine down like all those custom 1911 shops do so I can be different. It would kinda be an expensive mistake if I *fruitcage*ed up though <{POST_SNAPBACK}> Okay but the sudden explosion of "must get gunner grips" right after I show off mine? hehe. I'll look the other way! Link to post Share on other sites
SilentScope Posted October 2, 2006 Report Share Posted October 2, 2006 Well to give credit where credit's due, I did decide to get them in tan because I thought they looked good on your 1911, but I always planned to buy a pair so that I could make my MEU look a bit more modern. And thanks for pointing me in the right direction as far as where to buy them, I almost ended up using one of those no-name places that waits months to ship things out. Link to post Share on other sites
n00b3r Posted October 2, 2006 Report Share Posted October 2, 2006 Okay but the sudden explosion of "must get gunner grips" right after I show off mine? hehe. I'll look the other way! <{POST_SNAPBACK}> Good thing I'm not one of those sheeps. Bought my black gunner months before this post. Link to post Share on other sites
Lithium Jack Posted October 2, 2006 Report Share Posted October 2, 2006 (edited) Okay but the sudden explosion of "must get gunner grips" right after I show off mine? hehe. I'll look the other way! <{POST_SNAPBACK}> Suddenly Gunner Grips seem so mainstream... Think I'll have to get some Falcon grips instead, just to be different (and cheap) Admittedly dude, you could post photos of dog *beep* and people would see them and think "Damn, that dog *beep* looks good, gotta get me some of that". Edited October 2, 2006 by Lithium Jack Link to post Share on other sites
Azulsky Posted October 2, 2006 Report Share Posted October 2, 2006 Dont give him ideas Link to post Share on other sites
jordan2139 Posted October 2, 2006 Report Share Posted October 2, 2006 Anyone know if the Desert Warrior brown is the Krylon medium brown or regular brown? I have a friend thinking about painting his marsoc. +1 for anyone that can answer the question. Link to post Share on other sites
n00b3r Posted October 2, 2006 Report Share Posted October 2, 2006 Ask if you can try them at the store, and the one which looks like baby poo is the one that you should use. Link to post Share on other sites
Milla Posted October 2, 2006 Report Share Posted October 2, 2006 I agree titelist, i always wanted a 1911 with Gunner Grips because im in the Marines, and i think the MARSOCs are dead sexy. But seeing them on your Colt 1911 made me want them even more. And im giving credit to you by saying that im designing my 1911 to look liek yours...minus the safriland holster, way to much money, ill probably just get an Eagle one Link to post Share on other sites
DarkPhoenix Posted October 3, 2006 Report Share Posted October 3, 2006 (edited) I posted this picture in the latest acquisitions thread, but more pictures are always nice. (sorry for the blurry picture, my camera is a bit old) Edited October 3, 2006 by DarkPhoenix Link to post Share on other sites
hardboiledcop Posted October 3, 2006 Report Share Posted October 3, 2006 Since postion on the general section on this site hasn't really helped I was wondering if any of you guys knew where to find sheriff parts? I know you can find them at various HK companies but sometimes they have them out of stock or just not at all. Is there just one place where they have a lot of them? I only need two parts! Dentrinity carries the two I want but one is out of stock and they don't want to tell me if it'll ever be back in stock. I really need your help! (Please don't suggest Real Steel parts because n00b3r is doing all of the fitting and I don't think he wants to spend hours on one part trying to get it to fit! <{POST_SNAPBACK}> what parts do you need? Oh, and Sheriff parts require a shitload of fitting too, just so you know.. Link to post Share on other sites
Mobius Strip Posted October 3, 2006 Report Share Posted October 3, 2006 WA SCW2 M1911A1 with PGC metal slide and frame set. Ivory grips (phenolic) courtesy of 'Esmeralda's grips' I found the light grips very tricky to photograph well against the comparatively dark gun. Link to post Share on other sites
CplHicks Posted October 3, 2006 Report Share Posted October 3, 2006 Anyone know if the Desert Warrior brown is the Krylon medium brown or regular brown? I have a friend thinking about painting his marsoc. +1 for anyone that can answer the question. <{POST_SNAPBACK}> My M4 is painted Sand Dune and Med brown, which i think would be a bit too dark. Link to post Share on other sites
Recommended Posts