Fuser Posted February 23, 2007 Report Share Posted February 23, 2007 Thanks hbc. Link to post Share on other sites
ViciousV10s Posted February 23, 2007 Report Share Posted February 23, 2007 (edited) Technically 134a is a "green" gas because it is environmentally friendly (compared to ozone harming and greenhouse gases). All gases that do not harm the environment are dubbed "green." You have a can of regular ol 134a aka 1,1,1,2-tetrafluoroethane Edited February 23, 2007 by ViciousV10s Link to post Share on other sites
PoP Posted February 23, 2007 Report Share Posted February 23, 2007 and your the one who sold it to me  seriously man, even the fire pin was flat out SCW2, me am not a happy bunny <{POST_SNAPBACK}>  Man, see EvilHippys post.......... I was just goin on what i was told when i bought the damn thing! I just would NOT do that kinda thing to you or anyone else intentionally dude.. I'm as ###### as you Link to post Share on other sites
hitmanNo2 Posted February 23, 2007 Report Share Posted February 23, 2007 Looked like Marcus's old gun <{POST_SNAPBACK}> Looks like my gun (far right) I bought it from Marcus. Â Link to post Share on other sites
r.ocelot Posted February 23, 2007 Report Share Posted February 23, 2007 How do you remove those hybrid front sights??? Link to post Share on other sites
hitmanNo2 Posted February 23, 2007 Report Share Posted February 23, 2007 Can't say i've ever tried, but they're staked sights so I imagine pliers would do it. Link to post Share on other sites
phoenix360mute Posted February 24, 2007 Report Share Posted February 24, 2007 (edited) well, had a nice day today, got a serpa dropleg for a marsoc, so it holds both marsoc railed and non railed version (double win ) and the kimber i got yesterday, should be a blast, waiting on peteakaN00b3rakar.ocelot to get that bloody frame to me also  going to sao's on sunday to get my steel slide catch cut into 2 to fix my other gun lol  and, haven't yet decided, but i'm gonna sell either the marsoc, or the kimber, depending on the mood of the day when i get the frame from man mentioned earlier lol, leaning towards the kimber at the mo  then i'm gonna get the J-armory REAL SCW3 FBI pistol, gut the git AND jack the lovely magwell/mainspring housing it hads lol, too many 1911 plans ahead  when i steal someone's camera tomorrow i shall try to take some pictures of this lot   oh, also realized i have 9 WA 1911 mags lol, and only enough room on my gear to hold 6 might have to sell some of them at some point too Edited February 24, 2007 by phoenix360mute Link to post Share on other sites
allizard Posted February 24, 2007 Report Share Posted February 24, 2007 Looks like my gun (far right) I bought it from Marcus. <{POST_SNAPBACK}>   They put my SVI Xcelerator 6" hybrid to shame. Awesome looking picture!! Link to post Share on other sites
hardboiledcop Posted February 24, 2007 Report Share Posted February 24, 2007 I'll buy a couple of your magazines Phoenix.  Once I have all this money trouble sorted out, ill pm you early next week  cheers. Link to post Share on other sites
phoenix360mute Posted February 24, 2007 Report Share Posted February 24, 2007 unexpected sweetness Link to post Share on other sites
AirsoftNOOB Posted February 24, 2007 Report Share Posted February 24, 2007 hi, im wondering. i really want a full metal 1911, but if i order from redwolf and other HK retailers... how do they manage the trades? Â burn off? Link to post Share on other sites
uscmCorps Posted February 24, 2007 Report Share Posted February 24, 2007 hi, im wondering. i really want a full metal 1911, but if i order from redwolf and other HK retailers... how do they manage the trades? burn off? <{POST_SNAPBACK}>  Some HK retailers, such as Redwolf and WGC will remove the trademarks from a complete gun either using a dremel or a piece of plastic card super glued on top of the trademarks. From what I know, Redwolf will not remove trademarks from parts not installed on guns. Your best bet is to email the sales/customer service dept. of the HK retailer you were wanting to buy from and ask them directly how they would treat the trademarks if you bought gun X from them. Personally, if it's ever in doubt, I would ask beforehand rather than receive the package and get a nasty surprise. Link to post Share on other sites
Mathub Posted February 24, 2007 Report Share Posted February 24, 2007 Noober, it can take some time to get a metal slide/kit for a WA model. Generally, it takes at least 6 months. Link to post Share on other sites
MadCat360 Posted February 24, 2007 Report Share Posted February 24, 2007 (edited) Looks like my gun (far right) I bought it from Marcus. http://img377.imageshack.us/img377/549/dsc00617tr5.jpg <{POST_SNAPBACK}>  If you're gonna comp or port a gun ya might as well go the whole nine yards and put all the extended stuff on it.  No sense in being in a league with only half the gun your competitors have. Edited February 24, 2007 by MadCat360 Link to post Share on other sites
CplHicks Posted February 24, 2007 Report Share Posted February 24, 2007 Phoenix, whats the capacity of the mags? Link to post Share on other sites
Slug Pellets Posted February 24, 2007 Report Share Posted February 24, 2007 Just finished the initial cosmetic fitting of my Prime Springfield Micro Compact. It still needs a lot doing to it, not least cutting down the V10 barrel. Â Then I expect there are going to be countless niggles that need ironing out to get it to work properly! Â Link to post Share on other sites
Lithium Jack Posted February 24, 2007 Report Share Posted February 24, 2007 compacts are badass. Link to post Share on other sites
Mathub Posted February 24, 2007 Report Share Posted February 24, 2007 Slug pellets, good luck with fitting. Link to post Share on other sites
CplHicks Posted February 24, 2007 Report Share Posted February 24, 2007 Slug Pellets - looks great mate. Link to post Share on other sites
hardboiledcop Posted February 24, 2007 Report Share Posted February 24, 2007 Just finished the initial cosmetic fitting of my Prime Springfield Micro Compact. It still needs a lot doing to it, not least cutting down the V10 barrel. Â Then I expect there are going to be countless niggles that need ironing out to get it to work properly! Â http://i112.photobucket.com/albums/n197/Slug_04/000_1237.jpg <{POST_SNAPBACK}> Â Looks great, as Mathub says, good luck with the fitting, you'll most likely need it. Â looks like you have a silver barrel installed? so why do you need to cut it down.. are you trying to make it flush? Link to post Share on other sites
Slug Pellets Posted February 24, 2007 Report Share Posted February 24, 2007 Thanks for the comments . Â Its the inner barrel that needs cutting down as the Micro Compact is a fair bit shorter than the V10. Â I'm not sure how I'm going to do it as I will also need to cut a new grove for the O-ring. Link to post Share on other sites
phoenix360mute Posted February 24, 2007 Report Share Posted February 24, 2007 you dont really want a shorter inner barrel thant the one you have mate, that is if you want to shoot someone with it lol Link to post Share on other sites
hitmanNo2 Posted February 24, 2007 Report Share Posted February 24, 2007 Would a plumbers pipe cutter shrink to the size to cut the inner barrel? It would probably make the groove for the o-ring too. Link to post Share on other sites
lambolurker Posted February 24, 2007 Report Share Posted February 24, 2007 Im really digging the ported 1911s pictured up top. Â If I wanted to make my WA Kimber TLE ported, what parts should I buy? Just the slide and barrel? Which store carries them? Â Thanks in advance!!! Link to post Share on other sites
Lithium Jack Posted February 24, 2007 Report Share Posted February 24, 2007 Try Dentrinity Link to post Share on other sites
Recommended Posts