msx361 Posted August 17, 2007 Report Share Posted August 17, 2007 My sig turned up a while ago only just got round to doing photos. Got some hogue grips coming and im after a silver colour metal kit Link to post Share on other sites
Fond6 Posted August 17, 2007 Report Share Posted August 17, 2007 My p226: Link to post Share on other sites
blackhaggis Posted August 17, 2007 Report Share Posted August 17, 2007 (edited) Originally it was a TM P226 Rail Now it has Prime Metal Body & Slide Kit for Marui P226 ( Rail ) Creation P226 Steel Hammer (2T) Sig on 1 side / 226 on the Other Guarder Enhanced Valve Blocker for MARUI P226 Nine Ball Air Seal Chamber Packing Nine Ball Dyna-Piston Head Nine Ball 6.03mm Inner Barrel Nine Ball Recoil Spring Guide Guarder Enhanced Recoil & Hammer Spring 150% Nine Ball P226 High Bullet Valve (in the Magazines) Hogue Real Steel P226 Grips Nine Ball Gas Balls in the Mag Gas Tanks Not Shown are the 2 Extra Mags Prime Silencer Prime Outer Barrel with 14mm CCW Thread for Silencer Things to do - Replace the Original Grip Screw with some Hogue Screws With the Metal Kit the weight is very nice and the feel/noise when shooting is just great. Edited August 17, 2007 by blackhaggis Link to post Share on other sites
msx361 Posted August 17, 2007 Report Share Posted August 17, 2007 Did the hogues fit on without modification? I got the finger grip ones and i read somewhere (cant remember where now) that you have to mod them to fit? Link to post Share on other sites
davedawg123 Posted August 17, 2007 Report Share Posted August 17, 2007 The grip screw holes need to be enlarged, material needs to be removed from mainspring housing / grip contact area, and some material might need to be removed from the grip / magazine catch plate contact area. Link to post Share on other sites
msx361 Posted August 17, 2007 Report Share Posted August 17, 2007 Cheers babe Link to post Share on other sites
Romulus Posted August 18, 2007 Report Share Posted August 18, 2007 I found this thread to be really helpful (especially Smurfs bit at the end) when i fit my Hogues. Link to post Share on other sites
Hades Posted August 18, 2007 Report Share Posted August 18, 2007 Blackhaggis- How was the hammer installation on that? Did the hammer need any "adjustments" Link to post Share on other sites
pokethepope Posted August 18, 2007 Report Share Posted August 18, 2007 God I want a PGC P226 kit. Why must every store be out!!! <{POST_SNAPBACK}> PGC is putting the P226 kits back into production soon, BoomArms say they will be available September, RW confirmed they were being re-released but couldnt give a release date. Link to post Share on other sites
ncorpuz34 Posted August 19, 2007 Report Share Posted August 19, 2007 375 FPS @ 26 RPS Link to post Share on other sites
blackhaggis Posted August 19, 2007 Report Share Posted August 19, 2007 Blackhaggis- How was the hammer installation on that? Did the hammer need any "adjustments" <{POST_SNAPBACK}> Let me be completely honest and say that I did not 'build' my P226 - I had a far more skilled Airsoft Gunsmith build it for me. I will ask him about the Hammer Installation and let you know. Haggis. Link to post Share on other sites
Blink43va Posted August 20, 2007 Report Share Posted August 20, 2007 Thats beautiful! That made me want to get one now Link to post Share on other sites
amateurstuntman Posted August 20, 2007 Report Share Posted August 20, 2007 I have two, you want one? It is a bit tatty but works fine. there is a bit of damage on the handguard. Nice and cheap. Link to post Share on other sites
Blink43va Posted August 21, 2007 Report Share Posted August 21, 2007 Only after I get a few guns sold... those being all of em cept for my P226... Yes I am starting over Gotta get rid of my: JAC M16A2, G&G UMG, and TM P90... lol Link to post Share on other sites
Donut Posted August 21, 2007 Report Share Posted August 21, 2007 UMG, P90? I'm interested. And lol, I need to get rid of my JAC M16A2 as well. Link to post Share on other sites
amateurstuntman Posted August 21, 2007 Report Share Posted August 21, 2007 See anything interesting here? Link to post Share on other sites
amateurstuntman Posted August 21, 2007 Report Share Posted August 21, 2007 Nobody sees anything unusual about this 552? I spent ages on this. Link to post Share on other sites
Patrick[PM] Posted August 21, 2007 Report Share Posted August 21, 2007 the mag? Link to post Share on other sites
amateurstuntman Posted August 21, 2007 Report Share Posted August 21, 2007 Thank God. Yes, I made a bullet type 30 round mag out of two bullet type 20 rounders. Con: It holds less rounds than the short ones. Pro: I think it looks awesome. Link to post Share on other sites
HellsAngel Posted August 21, 2007 Report Share Posted August 21, 2007 Are the mags about the same size (obviously shorter) than the G36 mags? And how easy is it to put them in and out of pouches? The 552 looks really nice HellsAngel Link to post Share on other sites
amateurstuntman Posted August 22, 2007 Report Share Posted August 22, 2007 If anything I'd say they are a bit thinner, I'll do some pictures later. Link to post Share on other sites
Lord Blackgoat Posted August 22, 2007 Report Share Posted August 22, 2007 Having held both RS mags, indeed the Sig are slightly thinner and being 20 rounders (got 3 of them for mine), shorter. The G36 mags are somewhat huge! Haven't thought about carrying them around in an assault vest yet... Mostly because that would be pointless and silly looking at the range! Link to post Share on other sites
Piotr Posted August 22, 2007 Report Share Posted August 22, 2007 Hi, this is my SIG configuration today: and very soon I will update the SIG with a Custom RAS... Link to post Share on other sites
HellsAngel Posted August 22, 2007 Report Share Posted August 22, 2007 Thanks for the feedback on the mags guys, the G36 mags have always seemed pretty overwhelming, but if the SIG ones are slimmer that sounds interesting! Link to post Share on other sites
junior Posted August 22, 2007 Report Share Posted August 22, 2007 (edited) Action Slide, stock frame... 76 pictures and none could really capture the beauty of these grips... Edited August 22, 2007 by junior Link to post Share on other sites
Recommended Posts