shmook Posted August 9, 2011 Report Share Posted August 9, 2011 Slightly OT: I really want a go on my friend's dad's Lee-Enfield No4 that is converted to a bolt action shotty in 20 bore. (sorry, twentieth pound ) Sticking with the OT, is your friends' dad an instructor with the cadets? Was chatting to a mate of mine yesterday, who said his boss has one, and I'm guessing the are quite rare Quote Link to post Share on other sites
kruck Posted August 9, 2011 Report Share Posted August 9, 2011 Y'know those nifty sights on the Mossberg 500's? Does anyone know if you can you buy those seperate at all? ill even buy Real steel. I've got a set or two hiding somewhere, PM me if you want them and I'll try and find them Quote Link to post Share on other sites
DEVILHUNTER Posted August 9, 2011 Report Share Posted August 9, 2011 Some pics of my last custom: Tanaka M870 Masterkey, with my other shotgun (Airsoft Surgeon Slugshot). Soon in project suggestions. 1 Quote Link to post Share on other sites
Typewriter Posted August 9, 2011 Report Share Posted August 9, 2011 That is some hardcore badass Archie you got there! Lovin' the slugshot as well. Quote Link to post Share on other sites
TheFull9 Posted August 9, 2011 Report Share Posted August 9, 2011 Shell ejecting Masterkey... more win than that topless cheerleader parade with the hundred foot chocolate teddie bear and the F-16s doing aerial acrobatics choreographed to the music of Queen. Now get it attached to one of those TOP M4s, then you're really cooking with flame-thrower fuel. Quote Link to post Share on other sites
Kaworu Posted August 10, 2011 Report Share Posted August 10, 2011 (edited) Possibility? (EDIT: with or without tac-toe) DE M56B See ya! []'s Edited August 10, 2011 by Kaworu Quote Link to post Share on other sites
frogfish Posted August 10, 2011 Report Share Posted August 10, 2011 (edited) Some pics of my last custom: Tanaka M870 Masterkey, with my other shotgun (Airsoft Surgeon Slugshot). This thread should be closed on that note. This needs to be hooked up to a GBBR for some more win, although I'm not entirely sure that's possible, its like adding icing to the already iced cake. Edited August 10, 2011 by frogfish Quote Link to post Share on other sites
DEVILHUNTER Posted August 10, 2011 Report Share Posted August 10, 2011 Frogfish take a look into the M4 under the barrel, you can see the hop up adjustment wheel, It's a GBB-R jajaja Kaworu, nothing it's imposible. First, I would cut the back area where the stock is attached. Then I would thread some kind of adapter to the RIS in the top of the receiver, and ready to go. Quote Link to post Share on other sites
Kaworu Posted August 11, 2011 Report Share Posted August 11, 2011 I agree, really agree, nothing is impossible, but... I also use the M56 as CQB weapon with stock, so i won't cut the stub at all... just protect with gaffer-tape or make a wooden stub for her. (Book of Eli? no...) About the adapter, maybe i gonna go with a "decent" RIS on top and a adapter. Just ideas for now... See ya! []'s Quote Link to post Share on other sites
frogfish Posted August 11, 2011 Report Share Posted August 11, 2011 Frogfish take a look into the M4 under the barrel, you can see the hop up adjustment wheel, It's a GBB-R jajaja Well my mind just exploded please excuse me while I clean off my desk. May I ask, did you make the mount, or did you scavenge it from another masterkey? Quote Link to post Share on other sites
DEVILHUNTER Posted August 11, 2011 Report Share Posted August 11, 2011 I make it, except the M-57 QD mout for M203. Yo can see it here: http://www.arniesairsoft.co.uk/forums/index.php/topic/198742-m870-masterkey-tanaka-works-on-a-m4-gbb-r/page__pid__2480062?do=findComment&comment=2480062 Quote Link to post Share on other sites
scorch Posted August 11, 2011 Report Share Posted August 11, 2011 Sticking with the OT, is your friends' dad an instructor with the cadets? Was chatting to a mate of mine yesterday, who said his boss has one, and I'm guessing the are quite rare No. He does all that living history stuff though. I crashed round there once, in the spare room. Woke up the next day and realised just how much stuff I hadn't noticed in the dark the night before. Everything from a small cannon, up to a blackpowder musket. And that was the stuff outside the locker. Apparently he also has a Thompson in a small calibre. Quote Link to post Share on other sites
VAF.Hammer Posted August 17, 2011 Report Share Posted August 17, 2011 I am in the process of making some changes to my long neglected Maruzen CA870 "Pocket Sniper". It is fully upgraded internally, but I am in the process of making some changes to its appearance. I know that with some modification, real steel stocks can be made to fit the CA870s. In fact I fit an ATI pistol grip stock to it years ago shortly after 888 created his website about modding these fun little guns. The question I have now is about fitting real steel forearms to the Maruzen CA870s. I have seen photos in this thread with what appear to be real forearms fit to the 870. I have searched on this subject but can't find too many details. What does this entail? Is it a simple drop in replacement? Some minor modification? Major hassle? I appreciate any help I can get on this subject. Quote Link to post Share on other sites
Jim01 Posted August 20, 2011 Report Share Posted August 20, 2011 If any of you kind guys in the US could ship me out a surefire m69 tri rail to the UK drop me a PM, I would make it worth your while Quote Link to post Share on other sites
SFCHAVOK Posted August 24, 2011 Report Share Posted August 24, 2011 This is my "masterkey". It's nothing special, just the Maruzen 870 in the G&P Kit. Attached to a Classic Army RIS. (Which is the first airsoft rifle I ever purchased, over 7 yrs ago. While it only shoots around 270 ish, it has never had anything replaced internally and is still running fine.) 1 Quote Link to post Share on other sites
RIXX Posted August 24, 2011 Report Share Posted August 24, 2011 gorgeous Quote Link to post Share on other sites
RIOT1980 Posted August 24, 2011 Report Share Posted August 24, 2011 very awesome... Where you get this mount between barrel and shotgun...? Quote Link to post Share on other sites
WhiteHawksan Posted August 24, 2011 Report Share Posted August 24, 2011 very awesome... Where you get this mount between barrel and shotgun...? I's the G&P Masterkey kit. Quote Link to post Share on other sites
notrabies Posted September 20, 2011 Report Share Posted September 20, 2011 This is my "masterkey". It's nothing special, just the Maruzen 870 in the G&P Kit. Attached to a Classic Army RIS. (Which is the first airsoft rifle I ever purchased, over 7 yrs ago. While it only shoots around 270 ish, it has never had anything replaced internally and is still running fine.) Just curious what your gas system is with the masterkey. I was thinking about doing the same to my M870, but I realized I wouldn't have any way to power it. Quote Link to post Share on other sites
SFCHAVOK Posted September 21, 2011 Report Share Posted September 21, 2011 Mine isn't gas. It's a maruzen springer. Shoots fairly consistently at just over 350 fps. Quote Link to post Share on other sites
Regev Posted September 21, 2011 Report Share Posted September 21, 2011 Amazing Masterkey man, your gun looks perfect. Quote Link to post Share on other sites
notrabies Posted September 22, 2011 Report Share Posted September 22, 2011 Dang, as much as I love the look of the masterkey, I couldn't see myself using one unless it had some real close quarters benefit. However, I'm planning on making a field usable M870 as my next project, and when its done I'll put some nice pictures of it up here. Quote Link to post Share on other sites
Lt Plisken Posted September 23, 2011 Report Share Posted September 23, 2011 (edited) My two blasters, Both ACM M500's. Internal work done to re-seal everything correctly The top one has a custom rail bolted on, as well as a Guarder Aimpoint and NC Star Light/Mount. It's also sporting a real steel ATI Mossberg stock. The bottom one was cut down by myself, as well as re-did the loading mech to work in the MUCH shorter loading tube. Pretty sweet, if you ask me. Edited September 23, 2011 by Lt Plisken Quote Link to post Share on other sites
AMC1096 Posted September 25, 2011 Report Share Posted September 25, 2011 Does anyone recommend a RIS for a TM M3 Super 90? Quote Link to post Share on other sites
Dew Key (Dewk) Posted September 25, 2011 Report Share Posted September 25, 2011 My ACM m500 shorty. Steel charging arms, heat shield, RS pistol grip Nothing special. But I love it, too bad it leaks like a mother f****** Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.