Chevieblazer Posted February 26, 2010 Report Share Posted February 26, 2010 Made in USA sounds promising indeed. Sure hope you're gonna ship to europe also... Quote Link to post Share on other sites
tarzan Posted March 6, 2010 Report Share Posted March 6, 2010 does anyone know this fits on a g&p woc m4? got the non ris version and wanted to find the cheapest ris i can find haha http://www.airsoftgi.com/product_info.php?products_id=4593 Quote Link to post Share on other sites
Luis21 Posted March 6, 2010 Report Share Posted March 6, 2010 does anyone know this fits on a g&p woc m4? got the non ris version and wanted to find the cheapest ris i can find haha http://www.airsoftgi.com/product_info.php?products_id=4593 Yes, it should fit directly in the WOC's delta ring and handguard cap. It's also the retention design as the real KAC so it will be quite solid. -Luis Quote Link to post Share on other sites
swannie_2006 Posted March 6, 2010 Report Share Posted March 6, 2010 And now let's tune to our favourite series: Swannie and the Pro-win Mag. Episode 3: after being very frustrated and sad for I bought a mag that wouldn't work properly in my WOC I was close to sell it and buy some Gen 2 Bomber mags. Then came the thought: What if it is the wobbliness of the WOC body that makes my bolt stuck when I use the pro-win mag? Thought was followed by action: I went ahead and changed the standard front pin to the enhanced version (the one that tightens the upper and lower together). 5 minutes later I was ready to do the test... and I WIN! the mag got in without a hitch, it was caught by the mag catch as God intended (I am not sure which one, let's settle with whichever God _you_ worship). Gun racked; bolt release held down to ensure it wouldn't get engageed; trigger squeezed and everything works juuuuust fine. So, now I am looking forward to buy 3-4 more of these pure wins. Sorry, pro-wins. *dances happily and makes silly faces* Quote Link to post Share on other sites
tarzan Posted March 6, 2010 Report Share Posted March 6, 2010 thanks luis21! but didnt get the rail....went to egay and bid on a magpul moe milspec handguard, grip and stock and won for 100...question is...does it fit? hahah sorry....dont know shiet on gbbrs Quote Link to post Share on other sites
Luis21 Posted March 6, 2010 Report Share Posted March 6, 2010 (edited) thanks luis21! but didnt get the rail....went to egay and bid on a magpul moe milspec handguard, grip and stock and won for 100...question is...does it fit? hahah sorry....dont know shiet on gbbrs Well, there are TONS of Magpul'ed WOCs so i don't see why not. -Luis Edited March 6, 2010 by Luis21 Quote Link to post Share on other sites
tarzan Posted March 6, 2010 Report Share Posted March 6, 2010 thanks man you the best! haha Quote Link to post Share on other sites
swannie_2006 Posted March 14, 2010 Report Share Posted March 14, 2010 Here comes the question to all WOC owners: I'd like to have a VLTOR body but I can't make up my mind if it should be the G&P one of the King Arms one. The King Arms one sounds cheaper by 40USD (and given how weak the pound is against the dollar it is not something to sneeze at ). Does anyone know if the King Arms body is actually a good one, worth buying? Or should I stick with the G&P one? Thanks Quote Link to post Share on other sites
Schaap Posted March 15, 2010 Report Share Posted March 15, 2010 If you are planning on using it on a WOC: without doubt, go G&P. The King Arms will require some work to make it fit. Quote Link to post Share on other sites
swannie_2006 Posted March 15, 2010 Report Share Posted March 15, 2010 Thanks, mate. I certainly want to use it on a WOC. PS: there goes my lunch money for 3 weeks. *le sigh* Quote Link to post Share on other sites
tarzan Posted March 17, 2010 Report Share Posted March 17, 2010 hey guys just wondering whats the difference between the winter and summer buffer springs? i know its in the name but whats the difference between the two? will this fix my buffer spring problem? when i use my m4 it sounds like my buffer is bouncing around in the buffer tube. thanks again! haha =) and does anyone know what size allen screw driver i need for the grip? haha thanks again! Quote Link to post Share on other sites
D.O.C. Posted March 17, 2010 Report Share Posted March 17, 2010 The winter spring is weaker. ...when i use my m4 it sounds like my buffer is bouncing around in the buffer tube.... ...that´s normal, real AR´s do/sound pretty much the same, just a bit less due the stronger recoil spring D.O.C. Quote Link to post Share on other sites
PPM05 Posted May 1, 2010 Report Share Posted May 1, 2010 I cannot seem to fit the upper part of my KAC RAS (real deal) onto my G&P WOC M4A1, anyone had my same problem or knows a solution to it ? Thanks. Quote Link to post Share on other sites
stirrat Posted May 4, 2010 Report Share Posted May 4, 2010 It's probably a very tight fit, my friends woc was the same but he had the m16 length ras, my solution was to give it a good knock/slap/hit... Fits perfectly and is solid. You might need to use spacers to give the ras a little more room when installing it. The spacers are the ones that you usually get with new barrels to help align the delta ring with the gas rod opening.. Quote Link to post Share on other sites
tarzan Posted May 25, 2010 Report Share Posted May 25, 2010 hi would just like to ask if anyone tried this ras? http://www.airsoftpost.com/product_info.php?products_id=26621 does it fit without modifications? thanks! thinking of getting this because a magpul moe front with a rico 9 light just doesnt look right haha Quote Link to post Share on other sites
globe283 Posted May 25, 2010 Report Share Posted May 25, 2010 I just ordered the MAGPUL sentry WOC in tan, i hope its worth the money, i cant wait! I also bought it with some of the G&P mags i hope they work alright. Quote Link to post Share on other sites
tarzan Posted May 26, 2010 Report Share Posted May 26, 2010 or has anyone tried this on their g&p woc m4? http://www.airsoftgi.com/product_info.php?products_id=5669 Quote Link to post Share on other sites
RacingManiac Posted May 26, 2010 Report Share Posted May 26, 2010 http://www.pbase.com/racingmaniac/image/118591472 Not exactly the same one(12" instead of 7"), but thats a Madbull DD Omega rail... Quote Link to post Share on other sites
Chevieblazer Posted May 30, 2010 Report Share Posted May 30, 2010 Did the top rails of the upper and RAS align? I used to have the Noveske rail from Madbull, and the top rail of the RAS was like a millimter higher than that of the top rail... Quote Link to post Share on other sites
tarzan Posted May 30, 2010 Report Share Posted May 30, 2010 thanks and one more question haha sorry searched but couldnt find the answer, i got a aabb chrome bolt carrier and it was a bit to long and i would have to push back the buffer a bit and it was only shooting 180fps probably due to the nozzle not aligned properly to the magazine? Quote Link to post Share on other sites
RacingManiac Posted May 31, 2010 Report Share Posted May 31, 2010 Did the top rails of the upper and RAS align? I used to have the Noveske rail from Madbull, and the top rail of the RAS was like a millimter higher than that of the top rail... They are close but I don't remember if it was perfect. I replaced the rail since I didn't like the way Omega feels to hold. Running King Arms LaRue copy now... Quote Link to post Share on other sites
SilentTank Posted May 31, 2010 Report Share Posted May 31, 2010 I hate mags. Seriously I just blew my 3rd GHK mag IDK what to do. what magazine works best for you guys? Anyone tried the G&P mags yet? Pro wins doing well? whats the best mag!!! AHHG so frustrated. Quote Link to post Share on other sites
stirrat Posted May 31, 2010 Report Share Posted May 31, 2010 What do you mean you 'blew' you ghk? Yea i would avoid G&P's and get Pro-wins Quote Link to post Share on other sites
SilentTank Posted June 1, 2010 Report Share Posted June 1, 2010 What do you mean you 'blew' you ghk? Yea i would avoid G&P's and get Pro-wins Really?? G&P's no good? And by blew I mean I was filling it and all of a sudden WHOOOSH all of it starts spraying out of the fill valve like in a vapor. I have no idea what caused it this was the only mag I had that worked reliably. Any advice on how to fix? Quote Link to post Share on other sites
ThaFlash Posted June 1, 2010 Report Share Posted June 1, 2010 I heard good things about the G&P's from the few people that bought them. I had a terrible Pro-Win experience, I hope that it was just me getting an early model with poor QC but the fill valve is a quite terrible design by Pro-Win. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.